HP 15-r015dx

I disassembled the laptop so that I could insert more ram in it. I turned it back together. He responded and came. However, the screen is not. Or rather a (very light) faint twinkle and is black. What should I do?

The way to see if it is compatible is to go to the website of the manufacturer of the memory (Kingston/Corsair/Crucial) and use their utility Configurator, memory or memory finder to find guaranteed compatible memory.

If you remove the Samsung module and put back together it will start probably right upward. Mix bars of memory from different manufacturers is the most likely reason that it does not start at the moment. Always replace the memory modules with absolutely identical pairs.

Tags: Notebooks

Similar Questions

  • HP Touchsmart 15-r015dx: Wi - fi does not work on Windows 7

    Hi people,

    I replaced Windows 8.1 with Windows 7 Home Premium (authenticated) on a HP Touchsmar 15 - r015dx and has everything to work except the WiFi.

    The download page for the specific driver for this laptop lists not all wi - fi drivers.

    Someone at - he encountered this problem and managed to resolve it.

    Any help or information will be greatly appreciated.

    Hello:

    It comes with a Realtek RTL8188EE you find the parts list for your model 802.11bgn adapter Wi - Fi.

    It would be the driver for the wireless card you need for this model.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-143747-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0018

  • new memory upgrade of hp 15-r015dx

    my daughter just bought a 15-r015dx and he has 4mg of ram.  It is said there are 2 slots available and it uses ddr3, but I'm trying to understand how it can be improved to memory, and of what type.  I tried to run the configuration of memory, but I can't find this model.

    Thank you.

    Hello

    The phone supports up to 8 GB (PC3L, 12800, 1600 MHz) RAM system in the following configurations:

  • 15 HP r015dx Notebook: 15 HP r015dx - wireless and Bluetooth controller driver

    Hello. I have a HP 15 laptop r015dx. I've just recently demoted it to Windows 7 Professional 64 bit window 10. I installed most of the necessary drivers except for the wireless and Bluetooth. I search all the possibilities to find a driver for my laptop and was unsuccessful. I read an article Solve: pilot Wifi HP 15-d006tu Windows 7 64 bit where Paul Tikkanen brought a solution to the person who has had a similar problem.

    Does anyone in this forum can give a solution to this problem that I am facing.

    Need help... AS SOON AS POSSIBLE

    Bill

    Hi, Bill:

    That's exactly what I need.  Yes, you have a different wlan with bluetooth card that showed the parts list.

    Here are the links to the wireless and bluetooth drivers you need for this model of the wlan card.

    This package contains the installation package driver for Ralink wireless LAN controllers in the laptop models running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71525.exe

    This package contains the installation package driver for the Bluetooth MediaTek/Ralink in the laptop models running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70570.exe

  • 15 - r015dx: laptop locked out

    I have a laptop 15-r015dx someone administrator or power on password and I forgot what they put in. What can do to reset. It gives a code system with disabilities 54329344

    Can you help me?

    Hello

    Enter: 41081980

    Kind regards

    DP - K

  • Touch smart Notebook 15 r015dx: keyboard keyes

    Keys on my keyboard seem to stick for example if I type the letters c or z "cz" appears, a or d 'Announces' pop up or sometimes by pressing the letter 'a' is my favorites appear when I'm on the Internet. It's only the second and third letter on the left side of the keyboard. Any ideas would be greatly appreciated because using the screen keyboard on takes too much time. Thanks in advance.

    Here's what I tried.
    Update BIOS
    Hard reset with out the battery and pressing the power button for 15-30 seconds.
    Take out the battery and put back
    Pressing shift x 5
    Pressing the function (fn) key
    I'm just starting lost right now.

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    It seems that you are having problems with your laptop keyboard.
    We will surely help you with that.

    Let's start with a question:
    1 was there any liquid divided on the laptop keyboard
    2. are there as no dust settled on the laptop keyboard
    3 are there keys that fell / keys that are loose

    Troubleshooting:
    Step 01. Click the Start button and select Control Panel
    Step 02. Open Device Manager and expand the keyboard in the list
    Step 03. Right-click on PS/2 Standard Keyboard and click on uninstall
    Note: This driver will settle again automatically on your laptop
    Step 04. Please turn off the laptop
    Step 05. Disconnect the power/AC adapter and also remove the battery too
    Step 06. Press and hold the power button of the laptop for a minute
    Step 07. Now re - insert the battery back in and plug again the power supply/adapter
    Step 08. Start Notepad and keep pressing the F10 key during startup to access the BIOS
    Step 09. Once you get the BIOS, please press F9 or [model] F5 key to load the default Installer for BIOS
    Step 10. Use the arrow keys to say 'YES' and press enter
    Step 11. Now press ESC/ESC. Save Changes and Exit - Yes
    Step 12. Now, please wait until the unit load the Windows operating system

    Please click on the link shown below to solve the problem with greater ease
    http://support.HP.com/us-en/document/c03738933

    Last but not least could you please check and verify if the external USB keyboard works fine or not?

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    K N R K
    Although I am an employee of HP, I speak for myself and not for HP

  • HP model 15-r015dx: no boot device

    I don't have the dist of starting my laptop computer. Where can I download the software so I can burn it to a disk on my PC?  I've been everywhere in the Web site, I'm totally lost.

    Jonathan-Bravo

    Hello;

    Let me welcome you on the HP forums!

    I read your post about needing a boot disk and wanted to help.

    Unfortunately, HP provides all the downloads.

    If your goal for this is to restore your PC, what you need is something known as HP recovery media.

    It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.

    You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

    Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.

    Or, if you prefer, you can do the same by contacting HP Customer Service:

    If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

    If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

    Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • Laptop HP 15-r015dx: administrator password


    Hello:

    Please read the first post on the link below which should solve your dilemma.

    http://h30434.www3.HP.com/T5/notebook-operating-Sy...

  • HP 15-r222ng: Ram upgrade

    Hello.. everyone

    Please I want to ask if HP 15-r222ng laptop computer if it can be expandable up to 16 GB of ram?

    Thanks in advance...

    Intel 15-r series models has two slots.

    This has been discussed in a thread earlier this year at the following link.

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/new-HP-15-r015dx-upgrade-memory/TD-p/4439178

    The specifications indicate just that there is a single 4 GB module installed.

Maybe you are looking for

  • Satellite C650 - activation of Microsoft Office pre-installed product key errors

    I recently bought by Satellite C650 laptop comes with Windows 7 pre-installed. However, when I try to enter the 25-character, the sticker Windows 7 product key, in order to validate my Microsoft Office license, it says "the key is incorrect. Make sur

  • HP6510: Connection to Server error-1

    I have the printer wireless HP 6510, who owns the eprint, scanning and different printing applications, that is, disney, etc. I used to be able to use the app and be connected. Everything works except the apps. Whenever I have select this option on t

  • How to generate a single pulse with DAQmx

    I need to generate a single pulse using DAQmx.  Many of the example of the AO screw blood generation using waveform (multi) .vi buffer generation.  This VI generates a + / amplitude.  I want that my pulse to go from zero to a positive amplitude.  How

  • synchronous 4xAI, 3xAO on RTSI

    Hello! My task is to control a material with 3 channels AO reading product return of 4 (minimal 1) data HAVE channels simultaneously. I ve got two PCI cards: PCI 6711 NOR to one of AO channels and a 6110 NI PCI for the rest. Both are connected to the

  • cRIO-9073 not appearing is not in devices and Labview 2009 targets

    In MAX, I show the following: a cRIO-9073 with NOR-RIO 3.0.0 installed. My system software has NEITHER-RIO 3.0. In LabView 2009, when I try and add the cRIO to my project in LabView 2009 in New-> targets and devices, I don't have a list in time real