Similar Questions

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• OfficeJet Pro 8620 appearing does not in devices and printers

  Short computer news:

  Computer 1 - ENVY HP dv7 running 64-bit Windows to 8.1

  Computer 2 - Dell XPS 12 running 64-bit Windows 8

  I recently bought a new 8620 Pro of Officejet and currently am having problems actually use it.

  

  I have already installed the driver for long from the HP website, but the printer does not appear in devices and printers. Not only, I'm unable to send print jobs to the printer from my computer.

  

  

  However, the thing that is most troublesome is the appearance of the printer in places such as Device Manager and the print dialog box. I would like to remind that even using the print dialog box or print through any application (E.g. Microsoft Word) in fact the print job never crosses.

  I already reinstalled the driver several times only to get virtually identical results. This problem only seems to occur on my computer main use who WANT a HP dv7.

  I have however a second computer is a Dell XPS 14 where I can use the printer very well.

  With the results of the SFC is not not a complete success and the issue be isolated to this computer, I think that it is time to perform a Refresh of the Windows 8 operating system.

  How to refresh, reset or restore your PC<>

  It would be wise to perform a backup system to be on the safe side.

  Backup of your files (Windows 8)<>

  See you soon,.

• DAQmx device not no projection in LabView 2009

  Hello

  I have a USB-6501 that im trying to use with LabView 2009. It is installed and appears in MAX, however when I try to access them through LabView its not registered when I try to set the physical channel of the DAQms create channel vi. The whole device is missing.

  Anyone had this problem or have any idea what im doing wrong?

  As I thought... your constant physical channel is filtered to only HAVE. Please change the top right and select «IO name filtering...» ».

  In the dialog box change the Type of IO to digital input. Now you should find the 65xx device.

  Note that the parameter for filtering of IO is determined during the creation of the constant/control. So if you created when the DAQmx chain has been set for AI voltage (default), the name of IO filtering is I. This will not change simply because you reconfigure the DAQmx create channel...

  Norbert

• Imaging Source DFG/SV1 acquisition card is not correctly recognized in LabVIEW 2009

  I have an Imaging Source DFG/SV1 frame grabber/capture card (I think that this example uses a Bt878 chip) that I am using with LabVIEW 2009 (Fall edition 2009 academic Site license), including elements of acquisition of vision (NEITHER Vision, NOR-IMAQ (4.3) OR-IMAQdx (3.4), etc.). I have all the latest sources of imagery support drivers and software for the Board of Directors (http://www.theimagingsource.com/en_US/products/grabbers/dfgsv1/ drivers: v6.0.3.0, IC Software v2.1 and IC Imaging Control v3.1) with drivers being compatible DirectShow. The DFG/SV1 is detected in MAX under devices NOR-MAQdx / DFG/SV1 / cam0 and I can grab and preview images, however to 320 x 240 resolution, I have a higher resolution camera and know that the jury is capable of greater resolution using IC software manufacturing and also via TWAIN with ImageJ software drivers. Interesteingly, if I try to acquire an image of the card purchase using the Vision Assistant, the DFG/SV1 card is not recognized as a card acquisition, but listed under IEEE 1394 or GigE peripheral, revealing with it being direct device that I can't understand. Despite this I can acquire images, but I am limited to 320 x 240 format and change the type of image (RGB, UYVY etc) causes an error. Once again, oddly enough, I can use "enter and select mode example VI" which should only be compatible with IEEE 1394 cameras.

  I'm not sure why LabVIEW is not seen this card properly, I contacted Imaging source who were also intrigued by the fact.

  Any information on how this could be resolved would be much appreciated.

  Thanks in advance.

  Hi OCastell,

  With this Council Imaging Source, the only interface supported with drivers of NI Vision Acquisition is through using IMAQdx DirectShow interface. It is possible that their DirectShow driver does not properly support all of the capabilities of their Council. Given that ICR software and TWAIN support can be routed to a different implementation of one of the DirectShow support, you can see the different features available. Unfortunately, you probably go through Imaging Source to determine why their DirectShow driver does not support the full resolution. You can confirm that it isn't IMAQdx this limiting trying other software such as Windows NetMeeting or AMCAP DirectShow and see what capture resolutions are listed.

  Because the DirectShow interface is managed by IMAQdx driver, it will not be detected as a framegrabber IMAQ using the IMAQ driver. This is expected since it fits in the same category as firewire and GigE Vision cameras and is supported with the IMAQdx driver instead.

  The "Grab and select the Mode" example VI isn't really specific FireWire, although he was certainly intended to highlight the various video modes that generally expose FireWire cameras. Since the DirectShow devices are similar and have several selectable video modes, it's why he's probably working. In any case, IMAQdx abstracts usually differences between all supported camera types and in general a single VI can run on all cameras IMAQdx-taking in charge unless you rely on buses or the camera-specific features.

  Regarding Vision Assistant marking the camera as 'IEEE 1394 or GigE', I think it's just an aesthetic issue (which may already be fixed in new versions). When IMAQdx was out, these are the supported types of cameras and so Vision Assistant was trying to say clearly what driver was used for the type of device. Now that IMAQdx supports a multitude of new interfaces (including DirectShow and some IP cameras) that the label is inaccurate.

  Finally, looking at the specs for this capture card, it looks like a standard reference BT878/848 model and then you could try potentially replace your Imaging Source driver with one here:

  http://BTWinCap.sourceforge.NET/

  I used this with a with IMAQdx BT878 capture card and can get it to capture an image full resolution (but of course, your results may vary...). It goes without saying that this solution using DirectShow is much more limited than using an industrial camera on 1394/firewire or a framegrabber IMAQ.

  Hope this helps,

  Eric

• LabVIEW host could not download my_subvi.vi Labview 2009

  My problems started with the jump in Labview 2009. When I try to deploy my project during execution of the façade on my host and the remote control code, I get:

  Host LabVIEW cannot download my_subvi.vi. "my_subvi.vi" is a random under vi of the project. It can be different every time. This happens to my RT PC and so far not for PXI box.

  After talking with OR I downloaded the 2009 SP1 update and all other updates to run the RT kernel to version 9.01. I've updated the remote computer does not change.

  I also did a little test. I can run a simple empty code as a moment of pure looped and that is fine, but when I add a Subvi it gives me the same error each time.

  I have a quad core 2.4 GHz with 4 GB of RAM. A lot of memory and time processor. I used to run it with 8.2, 8.5.1 and had no serious problems.  My RT PXI seems to be good so anyway...

  Ideas?

  After talking to the consultant NOR I found the solution.

  It's all just stupid but works. I removed the second stick of memory - I have 2 + 2 GB of RAM; It works now. LabView RT apparently has problems with address more than 2 GB of RAM. I wonder if it has something to do with memory dual channel or not. What happens if I had 4 + 4 GB memory - would I have to buy 2 GB mem?

  Oddly enough, it was working fine with this configuration under Labview 8.2, 8.5, 8.6 and stopped at 2009 and 2009 SP1.

• Interruption USB Raw: flow of data between USB Raw Device and Labview!

  I do the USB communication between device (Microcontroller) Labview and USB RAW. I did all the things like the raw driver OR USB and I am able to get the 8 bytes using getusbinterrupt.vi, but my application requires continuous data transfer between pc and microcontroller, inorder to achieve that I put continuous loop in the microcontroller, so it transfers the data of continuos on pc, (in this case e.g.0 to 255 and again from 0 to 255 and so on.) , but I'm not able to get increment of 1 as written in my program, instead of that I'm getting increment of 5 to 10... is it because Microcintroller is very fast as my pc? If so how can I get continuous data without breaks...

  I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

  Like, I would also like to write to the device with labview, can you also suggest for this also? I read messages like:

  http://forums.ni.com/ni/Board/Message?Board.ID=170&message.ID=382144&Query.ID=445342#M382144, but I am facing the same problem as this user...

  Thanks in advance.

  MRS.

  26314362 wrote:

  I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

  MRS.

  Run a quick code continuous mode is completely unnecessary.

  In your code you continiousely who and unregster events, it takes a while, maybe the following will help to improve the code:

  

  I don't know, but you might be able to reuse the event.

  Tone

• Phone not appearing is not in devices and printers.

  Original title: phone not recognized

  I have a model of cell phone sanyo E4100, I plug it into the usb port and my computer sees load, however it does not appear on my devices & Printers.  I want to download a ringtown and/or songs but not noticed.  What is the problem and what can I do?  Thanks, J

  Hi Jason,
  First stop, let's get on with this question on the Feedback Forum for answers to the hardware and drivers Forum.
  As for your question, with most devices there are a few parameters to charge your phone. (depending on your phone)
  1. charge only
  2 USB mass storage
  3 synchronization
  Make sure that your phone is correctly configured, for more information on this topic, I suggest you to consult your documentation or support page of the phone.
  Hope this helps,
  Eddie B.

• the NI 9871 serial ports appear also in MAX with built-in serial ports of the target - under devices and Interfaces IS NOT? NO NEITHER 9871 (Scan Interface)?

  Hi - Have cRIO

  Can someone help me get the NI 9871 (Scan Interface) work?  My two 9477 and two 9425 and 9403, function with the scanning Interface.  In MAX > software > NOR-Serial RT 3.82 > NOR-Serial 9870 and Scan Engine Suport 3.8.2 9871 BUT NOT == MAX > devices and Interfaces > series & parallel = number of Ports Com for 9871 listed?   Project, 4-port RS-485 NI 9871 is in slot1?  Any help appreciated thanks

  the serial ports on the NI 9871 also appear in MAX with serial ports integrated target under devices and Interfaces

   

  NEITHER 9871 (Scan Interface)

  I left the Slot 1 Slot 8 9871 Know works and MAX displays 4 COM ports.  Something is misconfigured in Slot1?

  Solved!

  Thank you

• USB ports power your equipment, but not recognizing devices

  I started my pc yesterday (21/02/10) - for the first time since the incident of the blue death screen has resolved on 10/02/10 (see 'recent history of the problem' below). I got a screen that says "volume dirty cleaning in 3 steps" or something like that. Subsequently, the windows starts fine but the USB ports stopped working.
  

  All 3 USB ports are now fueling your equipment (confirmed by my laptop fan) , but none of them give me access to any external devices as my flash drives.

  Note: I didn't say "" do not recognize devices "and instead said"give me no access to devices "because when I plug in my flash drive, it is profiled as a material published by ususal Display icon at the bottom right of the taskbar." Of more when I try to eject the material, the flash drive appears as "Kingston Data Traveller". It's simply not let me access the flash player - instead when I click on the flash player icon (drive F :) it asks me to format the drive before using.) But then when I am trying to format it says that "windows cannot format the device."

  [Please note that the USB ports are all works perfectly between these two dates.] In addition, I did not any changes, hardware or software, recently. ]

  Recent history of problems (might be useful):

  I got a blue screen of death problem 2 weeks after I had installed Windows XP updated 09/02/10. I could solve this problem by uninstalling all the following patches: KB978262, KB971468, KB978037, KB975713, KB978251, KB978706, KB977165, KB975560 KB977914. (as suggested in the forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1)

  After that I do not start my PC, until yesterday. It is the problem of the USB to start.

  Hello
  ) not a bad answer, but a lot of work and you can make mistakes
  make a sfc/scannow, as indicated here that it will reinstall missing and corruption of files http://www.updatexp.com/scannow-sfc.html I also noticed in your answer "dirty volume in 3 steps of cleaning" is you have using a kind of cleansing software registry cleaner etc. Registry cleaners that aren't much good for the most part and they will mess up your computer...
  If you do not use a cleaner that get some anti malware software download and run
  I left and use http://www.malwarebytes.org/ please click the checkbox as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• xbr65x900c and HT-CT790 no sound, showing not not under the list of the bravia sync devices and not under the control of home theater

  I just bought a bar of his Sony HT CT790 and I'm trying to connect it to my TV Sony xbr65x900c, but it does not work.

  I have connected the HDMI ARC at both ends and verified that the menu of the bar of its manifesto in hdmi 4.

  I even updated the sound bar to the latest firmware and checked the TV is updated too, but the bravia sync devices list doesn't show any connected device and the control of home theater is not any device, and my sound bar is not listed in the supported audio system (HT-CT780 shows under is supported) This means that ht-ct790 is not taken in charge?)

  Help, please

  OK it's fixed! you won't believe how!

  Instead I used a HDMI cable, that I got with my xbox one and it worked!
  Also the bravia sync works and home theater!

• Devices and Printers dialog box empty

  When I opened my "Devices and printers" dialog box, it is empty; nothing shows, and registration of the order of the day says "0 items.

  Printers appeared in the devices dialog box and printers and devices box earlier, but now are gone from the dialog box.  However, they are still in the system, everything seems to work.  The problem of trying to define the preferences for the devices and printers, because they cannot be seen or accessed.

  Anyone got ideas on how get the devices and printers will appear again?

  Devices and printers will show a device when you set up multiple printers for the same device.   There is a passage outwards the menu to access all the other printers on the device.    Use teams of spooler UI, printmanagement.msc to display all local printers on Pro and Ultimate.

  The old printers folder can be launched if you run Home versions.

  Open a command prompt and paste this in.

  Start shell:::{26EE0668-A00A-44D7-9371-BEB064C98683}\0\::{2227A280-3AEA-1069-A2DE-08002B30309D}

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• My iPhone does not appear in iTunes, unspecified device

  I have read a lot of similar topics on this issue and done research but still no luck.  I have an iPhone6 and a 4S that I use on my new laptop, I got it around a month ago.  Everything worked very well I use one for film and one for music.  4 is not active and I mainly use it as an iPod touch.  Last night I tried to add some media to one of them and don't show in iTunes.

  I tried to uninstall everything, including the mobile setting or whatever it be listed as Apple in my programs and reinstall everything.  I restarted my computer and still nothing works.  It's weird because it was working fine all this time until yesterday.  My iPhone is a device not specified and I use Windows 10.  I tried to make the option of troubleshooting on devices and printers, and it says that it cannot be used on USB 3.0 and try again.   I did, and then he said: the computer cannot solve.  The problem is that I used USB 3.0 for a month now without any problems.  I'm stuck and have no idea what to do.  Any help would be greatly appreciated.

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• USB-6008 appears in Device Manager but not in MAX or Labview

  I use Windows 7 Ultimate 32-bit and you want to use a USB-6008 in LabVIEW 8.5.1. The device appears under data acquisition devices in the Windows Device Manager. The flashing on the device, but the device does not appear in the Explorer of Measurement & Automation 8.7.1. am I missing something?

  He doubts.

  First, check the easy things... to refresh the list of devices to MAX and see if it comes to that.  I'm guessing you've already tried this, but it never hurts to check.

  My bet is that it's a database corrupted Max.  This happens from time to time.  Usually when I see it, the 'Dev1' always appears in LabVIEW if you plop down constant DAQ hardware or control.

  There are tools and processes to erase and start over with a new database, but in my experience, the best way to resolve it is simply update or reinstall MAX.

• Micrsoft ISATAP adapter 4 reinstalled, not appearing is not in devices

  Hello

  I've been troubleshooting for a few days because Im having trouble connecting to World of Warcraft.  I discovered my adapter had the error code 31 cannot load drivers. I followed the steps to update the driver, and he said that the driver had the most recent update.  So, I then followed the steps to uninstall and reinstall the driver.  Now it is not appear at all in Device Manager. I tried to install it again and no luck.  Please help, Ive tried for days!

  Thank you

  ·                        http://support.Microsoft.com/kb/932520

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  Windows cannot load driver (Code 31)

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner