HP 2210 m display: 2210 m rotation screen

Similar Questions

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian

• How to: rotate screen in Windows 7 by a shortcut.

  original title: rotating screen in Windows 7 by a shortcut. Others say that Shift + Alt + arrows should do the trick. However, only of dialogue "-the control panel display" works for me.

  There are two reasons for shortcuting the task:

  1. Have you tried to run a GUI GUI is on tour?
  2. The option is expected to use the rotating monitors - some texts are easier to read in portrait mode, others in the landscape. This suggests that reversal is supposed to take place dozens of times every day.

  What Miss me?

  Several months have passed since this thread was started, and a lot of things have happened.
  I had the same problem with an ATI Radeon card. Here's how I solved it:

  -The latest version of Catalyst Control Center;
  -in the main screen, you have the "Préférences" button click it
  -Click on the first option ("Hotkeys" or similar, I have Italian, don'know exactly what the English name)
  -In the list, double-click the items that you want to enable and assign a hotkey (for example CTRL-ALT + cursor). The ones meant to rotate the screen are the first four.
  -Click OK.   Total time required: about 2 minutes.

  Enjoy! :-)
  MAx - Italy

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Color calibrator may not work correctly, because the display does not fill screen.

  I have a Thinkpad W520 with 1920 x 1080 HD display and the color sensor. I tried to run the color standard application but always, she will work until the end but cannot process measures. So I opened the lid in the middle of a calibration and discovered that the color screen that is supposed to be seen by the sensor is not full screen, thus preventing the color measurement sensor. How can I set the graphics so that this application is displayed full-screen when executing? Thank you.

  Yes. But I just solved the problem. I set my display to display the text, icons, etc., to 150% of normal resolution. Somehow, he was causing the application displays only a partial screen. I set the magnification to 125% and now the standard color works very well.

• The start screen is displayed on the external screen

  Hi guys,.

  Recently, I have a Thinkpad L540 and it is pretty cool.

  But I had a problem when the laptop starts when a VGA is plugged, the splash screen (the screen just after, when the portable lights) is always displayed on the external screen (projector).

  I already checked the BIOS and it is set to "Thinkpad LCD".

  I don't know if it will be fixed with a BIOS update.

  Thanks for your help.

  Sincerely,

  Zero1519

  Welcome to the forum!

  What you see, it's quite normal and the way it has always been on ThinkPad.

  Don't expect an update of the BIOS to "fix".

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Rotate screen Microsoft Terminal

  We want to rotate screen terminal for Windows 2008 R2 server, can someone help us in this area, is this possible with MS Terminal?

  Hi Mary,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in TechNet Windows Server.

• When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes

  When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes. Sometimes when I click several times on the target folder it opens other times it does not. Any thoughts?

  Hello

  You try to save files using Microsoft office?

  If so, this article should help you

  The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in a 2007 Office program or in a program Office 2010

  http://support.Microsoft.com/kb/313937

  If its with a different program and then check if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Step a. refer to the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Rotation screen

  While watching TV Online I pushed my remote keyboard and the image is now on the side and I have no sound.  I can't remember how to fix it.  Can someone advise please?

  See: http://answers.microsoft.com/en-us/feedback/forum/suggest/rotated-screen/2e98a40b-0009-49f7-b2e4-6536a7b6b823

• Do not understand statistical information net displayed in the cmd screen?

  Do not understand statistical information net displayed in the cmd screen?

  What is the purpose that you need this information? It is there for if you were to look like something, then you know what information you are looking for.

  Here's a key to understand the basics: http://technet.microsoft.com/en-us/library/bb490714.aspx

• delay after typing my password with the message: "preparing your desktop" displayed on the login screen

  I use Windows Vista for about 3 years now, it has been hurt on the first day.  However, it is the biggest problem I've ever known.

  My PC is currently the entire installation, which means that all the software, drivers and personal settings are applied to the way I would like it. But lately, I have had opportunities indicate that loggin, there was a long delay, after typing my password with the message: "preparing your desktop" displayed on the login screen (the PC was night shotdown, not having changed anything to the system), then I am connected to a desktop where I lost all my custom settings : wallpapers, plans, location of the updated table on the page icon, were all gone as if I start Windows for the first time, and every program I tried to run from there thought while they started upward for the first time.

  My office, I know, has completely disappeared.   How can I get it back?  Where at - it go?

  I am a school teacher and my student missions, etc. are in the files on the desktop.

  I'd appreciate any help you can give me.

  Please keep in mind that I'm not a techno person and very little familiar with several computer attributes.

  Thank you

  Press Alt + Ctrl + delete

  Start the Task Manager

  Click new task below or click file > new task

  Type explorer.exe

  Click ok

  Bring this back?

• Webpage display too small; How can I increase display size normal? Screen resolution is OK.

  WEBPAGE DISPLAY TOO SMALL; HOW CAN I INCREASE DISPLAY NORMAL SIZE? SCREEN RESOLUTION IS OK.

  Hello

  Check the bottom right of your Internet Explorer web page window to see if the zoom is set to 100%. If it isn't, then click the arrow to the right and select a zoom range from the drop-down.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• BlackBerry Q5 how do I put my Q5 so that the reminders (appointments, etc.) are displayed on my home screen?

  How do I put my Q5 so that the reminders (appointments, etc.) are displayed on my home screen?

  Glisser slide down from the top of your home screen, and then select settings > Notifications. Down, you will see blue settings letters lock screen. Click on that and turn the Lock screen Notifications we. Now whenever you have an appointment in your calendar, it will appear on your lock screen date here.

  See you soon.

• How to get the image to display on the Blackberry screen URL

  Hi all

  I'm setting up a Blackberry java application. I have a url to the image... (as you can tell "http://www.christianfilmdatabase.com/wp-content/uploads/2013/06/Movies.jpg"). I get this image dynamically and display on my screen. ... How can I do it... I post my code here...

  Bitmap bitmap = Bitmap.getBitmapResource(imageUrl);
  
                      Background background = BackgroundFactory.createBitmapBackground(bitmap);
  

  Best regards,

  Thank you very much, Peter... Now, I could get the web images and display them on the screen...