HP 23-f261 all-in-one running IS destined to the 8.1 use THE dongle Miracast Microsoft

Similar Questions

• Find the printer driver for HP all-in-one running Windows 8

  I just bought a HP Pavillion 23 all in one running Windows 8, I am trying to find a driver for an existing printer, Canon ImageClass D480 I have serious problems, thanks for any help

  Hi Jan,

  Welcome to the HP Forum!

  You will find not software Canon printer here on the site of HP - you have to find the Software Support Canon printer.

  Try here: imageCLASS D480 driver

  It seems there is a level of driver for Windows 8 support - if it is "full feature software" support or some form of basic driver support is something, you can determine when you visit the site and software.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• Officejet 5610 all-in-One: cartridge Error message:-see the documentation for the device to solve the problem

  I used Cartriege world genuing HP ink cartridges refills for the past 3 years.  These cartridges are about 3 months charging sine and worked very well.  I just print a page and then got the above message for the first time.  Any help?

  Thank you

  lurcher1

  Hello @lurcher1,

  Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.

  I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series

  You will notice Solution: use genuine HP cartridges :

  'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »

  To get a better understanding to take a look at the documents below:

  Can I recharge the ink in my HP ink cartridge?

  &

  HP vs reloaded cartridges inkjet print cartridges

  I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• All-in-one HP Officejet 4355 any ink not levels using Windows 7 (64-bit)

  I have a HP Officejet 4355 all-in-one printer and have recently changed my OS to Windows 7 (64-bit), and there is no available ink level.

  Help, please!

  Thanks in advance

  Concerning

  AggyTheSlyFox

  Hello

  The application of the HP Toolbox is no longer available for Widnows 7 for your printer, just a basic print and scan drivers set is available as you can find below:

  http://support.HP.com/us-en/document/c02663591

  You can print a self-test to find ink levels estimated on some levels, or to ensure print quality is good for some older models.

  Print a self-test of the all-in-one page to verify that the all-in-one works properly. If a test page does not print, contact HP for assistance. To print a self-test page, follow the steps below:

• PRI all-in-one HP Deskjet 2542: not the printer connected to the Modem

  My modem (wired LAN) password and the name was changed recently and now my printer (HP Deskjet 2542 all-in-one) does not connect to the modem.  The blue light just continuously flashes.  This is the only change that has been done to my modem and this is the first time I tried to print. It is printed on the front.  I called the cable company and they determined my modem was working fine and has suggested that to change my printer settings.  I grew up the printer instructions on my computer, but could not find something that I could change my settings to match the modem.  I think that's what the cable company told me to do.

  My printer is mod. # SNPRB - 1204 - 02.  If you need made more information let me know.  It seems that this should be a quick fix, but I'm not a computer geek.

  Hi @first100years,

  I'd love to help you connect your printer to your wireless network. The flashing blue light confirms without a doubt that, for some reason, the printer is is more set up.

  I found the following steps in this document: connect the printer after change of your wireless network.

  The HP software automatically collects the network settings by temporarily connect a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network.

• Brother all-in-one does not work with the computer more

  After an automatic windows/XP download started what follows:

  All-in-one Brother takes control of the computer, but are not sent or computer will not receive the image to the desktop.

  Also, same unit will receive a fax and normally sends to the computer to the paperport, but now he sends (i.e. "connecting to PC" displayed on the LCD of the brother) to a computer but it can not be found anywhere; so lost.

  Measures taken so far:

  1. Uninstall and reinstall the Brother software, no help.

  2 brother support after an hour said that it is the computer not brother (I believe that good).

  3 System Restore will not work, it goes through the whole process, but said at the end that there nothing; Try again...

  4. in addition, conducted a deep scan for viruses etc, nothing found.

  Any ideas?

  You have posted to a group of Vista, but seem to be using winxp?

  What automatic download? Update history will show what has been updated

• I have 3 computers in a network; two Vista and one running windows 7. The computer of windows 7 can be placed in the network map.

  Hi, I have 3 computers on the network; two Vista and one running windows 7.  The computer of windows 7 can be placed in the network map (and I seem to be unable to it remote desktop).  This could be the cause?  I tried everything in the help documentation.  My router is a linksys 610n.  Computers have no NVIDIA cards or controllers.  Here's a screenshot of what I see in the network adapter:

  Hello

  Excellent Sam Job Varkey information should contribute to solve in this case, however some is
  Added information that can help as appropriate:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• All-in-One C310: impossible to download the drivers and software for the e-all-in-one-c310 series since the update to windows 8.1

  Since I upgraded my OS from Windows 8 to 8.1 Windows I have not been able to print to my printer all in one c310 or have I been able to use the Solution Center software.  I tried to update the software and drivers from hp website, but when I click on the download button, nothing happens.  Any advice?

  Hello

  Download and install the software from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL34215/MP-109761-2/PS_AIO_07_C310_FSW_Full_Win_WW_140_408-4.exe

  Please let me know if you encounter problems using this link as well.

  Shlomi

• HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  Hello

  Please see the links to check ink levels.

  Check ink levels

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• Printer all-in-one HP 5520: document in the queue does not print

  Printer all-in-one HP 5520: Document in the queue does not print

  Hi Anita,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, you are having problems with printing.

  1. do you get an error message when you try to print?

  2. is the problem with offline or online printing mode?

  Perform the steps in the link and check.

  Why can I not print?

  Meet us if you encounter problems while printing or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• I have two computers, one running Windows 8.1, the other works in Windows 7.

  I have two computers, one running Windows 8.1, the other works in Windows 7.  I put Premier Pro, or a suite, on both computers at the same time?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• photosmart all-in-one problems 5200 impression with the new Dell running windows 8.1

  have a photosmart C5280 All-in-one I used with a computer that is running windows XP, it worked fine. Bought a new computer running windows 8.1, printer don't print very well at all. It prints the page after page, one or two lines of hyroglifics tile view deleted I canceled the print document to stop using paper. I uninstalled the printer software and reinstalled from website of HP software to run with windows 8.1 still does not work.

  I think it made me print again. I had to uninstall the full features software and loaded the driver only. I could not full features software to load completely, then I loaded the driver only and it seems to work okay thanks for the help.