HP 2311 gt (Big Black Border)

Similar Questions

• Satellite L500-1XL: black border play Big Fish Games

  I have a Toshiba Satellite L500-1XL and also on another laptop. I have some downloaded games from Big Fish games on two laptops. On the other laptop, they appear full-screen mode, but on the Toshiba there is a black border all the way round which makes the image much smaller.

  How can I make them appear full screen on the Toshiba please
  Gary

  Have you tried to change the resolution or video settings in the game options?

• Thinkpad8 to the TV via HDMI 1080 too big picture 720 large black border?

  When I connect my thinkpad8 to any TV supports 1080 p it will always cut the image around the edge as if its too big, so when I drop the 720 p resolution, you end up with a huge black border.

  I had a play with the graphics created intel and cannot see anyway to get on the scale so that the picture fills or adapts to the size of the TV screen.

  Ive checked on the lenovo utilities / win update / update intel for gfx driver updates and there is not, I believe that my current version of the driver is 10.18.10.3643.

  If someone can point me in the direction of a fix, I would be extremely grateful.

  I solved this by the way "overscan" in the TV menu, that it seems that it is 'on' by default on most TVs

• Watch the Black Border ATI HD4670 and ST2410 HDMI Cable

  There is a black border on my screen that I just put in place today 21/01/2010 from Dell which is approximately 1 "all around.

  The office is set to 1920 x 1080 at 60 Hz

  I can't find a setting in ATI Catalyst Control Center to adjust it to the height and width of the full screen.  I found this post http://en.community.dell.com/forums/p/19309246/19620047.aspx#19620047 with these tips...

  «Open the Ati Catalyst Control Center - digital Panel properties - attributes - resizing the Image and select "Adapt the image to the size of the full panel".»

  and have not found this device setting of anywhere.

  Anyone know the solution? Do I need to download a newer version of the CCC?  Thank you

  It's the implementation using an HDMI cable

  GIGABYTE GV-R467ZL - 1GI Radeon HD 4670 1 GB 128-bit DDR3 PCI Express 2.0 x 16 HDCP Ready CrossFireX Support video card http://www.newegg.com/Product/Product.aspx?Item=N82E16814125277 and the Dell ST2410

  I just fixed the problem BLACK at the BORDER.

  In the Catalyst Control Center (CCC for short), check if the following settings:

  Right-click on your desktop and go to the Catalyst Control Center. Switch to advanced mode if it isn't already.
  -At the top left, click on the menu "Graph", then "Desktops & displays.
  -For your desired display, left, click on the small black triangle in the lower part of the screen, on the SMALL image, not the BIG and click on 'configure '.

  This part is very CRUCIAL. There is a little image of a TINY TINY TINY TINY arrow display down FAR LEFT of the CCC menu. It's this LITTLE ARROW that you click on the button that says "Base...". "and the button that says 'OK' when you click the arrow of llittle black small-small (not the big black arrow in the middle of the CCC window you will be able to click on 'Configure', then the following will be available):

  There are 6 buttons at the top of the CCC

  Attributes

  Avivo color

  Scaling options

  HDTV support

  Screen LCD Overdrive

  Pixel format

  Under attributes

  -Check the box "Enable the GPU scaling" and select "scale image to full panel size. Hit apply.

  Under scale Options

  -There is a scroll bar to set Underscan and Overscan. I updated 0% Overscan and everything was perfect instantly.

  Click on apply

• When turned on my laptop, there is a black border around the screen.

  Original title: screen resolution problem

  Hello

  A few weeks ago, I turned on my laptopn and there was a black border around the screen. I managed to change the screen resolution, but my laptop seems to think that I have a dual monitor? And my resolution is still not like it was before. Obviously this isn't a huge problem, but it's annoying to have to go and change it regularly.

  In addition, given that this has started to happen, I noticed that when I turn on my laptopn, instead of the usual Acer / Windows startup screen, the screen is all black, until the login screen appears. I don't know if this is related or how, once again, this isn't a big deal in the grand scheme of things, but if an update is installed, you do not see the progress it's making!

  I ran a system restore, without success.

  Running Windows 7 on a laptop Acer Aspire. Any suggestions welcome, although I'm not that tech-savvy!

  Thank you

  Hello

  The first thing to check is your theme controls. Go to the control panel and select personalization. When this window opens, go down and select wallpaper. When this window opens go to the lower left corner and make sure that the background that position of the image is set to 'bridge '. Save the changes and return (right click on the name of the theme in the theme dialog box).

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• View my pictures with a black border?

  When you edit a photo, in that it appears a black border that one I find it really increases my photos.

  As I browse through photos in an album, I want to see with the same black border.  I think it improves their and would help me to decide which photos to keep and throw away.

  I can't find a way to use a black border, it is just white.

  

  This is not a feature of Photos - suggests to Apple - http://www.apple.com/feedback/photos.html

  LN

• Mysterious black border (only) at the bottom of the first screen iPhone

  I have an iOS application that I wrote in 2011, and I'm trying to upgrade to the latest iOS and devices.  I have a thick black border at the bottom of the first screen of my request, for most combinations Device/Simulator and iOS. This is * not * a black border at the top and at the bottom of the screen problem, who has been treated exhaustively in the forums.

  There is only a single black border at the bottom of the screen. Also, the border is only broadcast on the first screen of my request, that has buttons to go to the rest of the application. Even if I navigate to the first screen of my request, somewhere inside the application, the border becomes visible. There is no black border in the other forms in the application, apart from the first screen.

  It is * not * seems to be a launch image problem. I have a picture of launch, [email protected], and the launch image works fine. Here are the setups I get or don't get the black border:

  iPhone 4S (iOS 9.2) Simulator - without black border

  iPhone 5 (iOS 9.2) simulator - black border

  iPhone 5 (iOS 8.1.3) device - without black border

  iPhone (iOS 9.2) 5s simulator - black border

  iPhone 5 s (iOS 9.1) peripheral border - black

  iPhone 6 sec more (iOS 9.2) Simulator - black border

  iPad 2 (iOS 9.2) Simulator - without black border

  iPad (iOS 9.2) air Simulator - no black border

  iPad 2 Air (iOS 9.2) Simulator - without black border

  Pro Simulator (iOS 9.2) iPad - thick black border all around the application window

  retina Simulator (iOS 9.2) iPad - without black border (at the bottom of the screen)

  I tried everything I could think of, but nothing seems to work.

  Hello sandpjain2,

  Everything you wrote in 2011 will likely be rewritten using the automatic formatting.

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• My iPhone 6s has lines of black border around the screen. Is this normal?

  My iPhone 6s has lines of black border around the screen. Is this normal?

  A screenshot would help us see what you see.

• Pavilion g6: black border appeared on the right side of the screen - the task bar disappeared downstairs - 1280 x 800 (recommended)

  My laptop recently hooked and I couldn't even do a ctrl/alt/delete to run the programme of work to see what was going on, so I turned off manually. At the start, I have a black border running down the right side of the page and can not see the taskbar at the bottom. I put in 1280 x 720 resolution to allow access to the bottom task bar. I updated the driver for the display, but this did not remedy the problem. How can I go back to 1280 x 800?

  FIXED! Last series of Microsoft updates have cured the problem. The resolution is now in 1366 x 768 (recommended)!

  I can't think I powered the phone turned off when microsoft have downloaded updates, too bad Microsoft doesn't inform you they do this and then freeze you :-(

• How can I get rid of the black border around my screen?

  After an update, my screen resolution changed for no reason. Tried to change, but now I have a black border around my screen that I can't get rid of.

  Hello

  Windows Update will sometimes offer you updates of graphics drivers; NEVER accept them.

  Only go graphics drivers of your computer or the manufacturer of the graphics Web site map.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is the information on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Yahoo games don't show a big black square

  When I play games on yahoo my playground is nothing else that a big black square, help please

  Hello

  (1) do you have made no changes before this problem?

  (2) have you tried to play games by using another browser?

  (3) is the issue limited to the games on the site Web of Yahoo?

  (4) what browser you use to play the game?

  If you use internet explore, then you can check out the link below:

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  I hope this helps.

• Black border around window

  I do not know what I changed, but now I have a black border of 1 "around my screen.  Ground of the screen is set to 1920 x 1080, which is the native resolution of the display.  I can't find a sizing option from the menu of the monitor or in the options ATI Catalyst.  If I lower the ground to something lower, say, 1280 x 1000 screen is filled.  But I shouldn't do that.  Any help will be appreciated.

  Thank you.

  I think you're right on my installation of Windows 7.  I had several problems cultures towards the top has so did a reinstall on top of the original.  Problem solved!  Thank you.

• Displaying video MP4 in Windows Live Photo Gallery is big black box covering screen

  Direct problem photo library - a video file viewing MP4 leaves a big black box about the size of the video, covering most of the screen. I can see the WLPG homepage on the edges of the black box and click on the pictures (i.e. go to the next image), but is the black box and the program is unusable.  The black box can be removed leaving WLPG and restart.  I changed the default viewer for WLPG video but the problem remains.  Thank you...

  I have updated the driver from the NVIDIA site but no improvement.  But I have now solved the problem successfully.  Some time ago I downloaded DivX Plus.  I noticed that the video at the origin of the problem was a small DivX HD logo on it, so this program must have reset my settings by default and converted my files was not asking.  I uninstalled all parts of DivX and the problem is solved.   Thanks again for your support.

• Does not recognize a narrow black border a white border when printing without margins

  Photosmart D7460, Vista 64 bit,

  If I put a white border around a picture with a narrow black border outside a photograph and select borderless printing knows no black and white borders and prints the image within the borders to the edge of the page.

  If I want white edges around pictures and a full letter size print, I get a border that is wider at the bottom than at the top of the page.

  Can I configure it to print even a white border around the photo of the letter size?

  and

  Can I get the printer to recognize a border color around an image when printing without margins?

  I have only access to the X 2 version, here's a predetermined print schema.

  Note the Center on the page option.

  You can use the balance: option to increase or decrease the white border.