Technical problems with my Satellite A60

I bought a Satellite A60 in last September, and most recently, the computer had some problems.

1. when I tell my computer to "Shut down", it reboots sometimes
2. in the load upward, she sometimes displays the error message "the system has recovered from a serious error", without apparent reason
3. recently, some games and other applications had graphical problems, especially very bad speed slowdown.

What do you think is the problem? I have installed antivirus software and it seems to work. I run defrag and virus checks regularly, and nothing seems to come. Any ideas?

Hi Tim,.

It seems that you have a windows problem, maybe a few important files have been damaged in the past!

To solve all the problems, it will be the best to recover the windows partition with the Recovery Expert Mode CD!
Should be retrieved as C:!

Save all your important data, and then you can start to install a new Windows system!
It takes a long time to solve each problem on its own.

Rudi

Tags: Toshiba

Similar Questions

  • Problems with disk Satellite pro 4200 hard assembly

    I have problems with a Satellite pro 4200.
    The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

    CU
    Eltgen

    Hi Eltgen

    Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

    It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

  • Strange problem with my Satellite A200

    Hello

    I have a problem with my Satellite A200-1DY.

    In the last two days, this occurs twice. When I start the laptop there are three icons, systray, speaker, battery and network icon, and then, the laptop stops and does not work. I can't use the mouse or keyboard and the cooler fan does not work.

    When I put my hand the area where it is the processor it is hot enough. I can't reset the laptop. At first I have to disconnect from the mains. After that I restart the laptop. The cooler fan starts very quickly and it removes a lot of heat from the CPU area.

    What can I do?
    Sorry for my horrible English and marry Christmas.

    Hello

    At first, I must say that your English is very good and understandable. Now after this compliment go back to the problem described. ;)

    I have too many Satellite A200 and I installed Vista and Windows XP Home edition, several times and never noticed a similar problem. I must say that all my tests were with the own operating system preinstalled.

    In your case, it is not easy to say why this happens, but it turns out that some process must be loaded and at this stage of the computer cell blocks. Usually, if you keep the Start button / stop for 5 seconds, book it should be OFF.

    You must understand that no one knows we what's your personal operating system configuration and if there are some applications you have installed the last days. Exact an application that runs in the background may not be loaded properly and blocks for laptop.

    What should do? You can enter MSCONFIG and check all entries of Systemstart. Try to disable all the stuff, you don't need and try it again. Maybe you will be lucky and find out if there is something that starting cell blocks.

    Sorry, but it's really not possible to say why this happen. If you want you can try to roll back the OS to an earlier time until it starts in the hope that the BONE will be work as before.

    Bye and good luck!

  • Problem with my Satellite C650D - 10 d of charge

    I have some problems with my Satellite C650D - 10 d and its battery.

    Indeed, when I want to reload my computer, it will no more, charge his battery to 99%, then it says "Blocked, not supported" and the corresponding light is off instead of orange or yellow-green.

    Then, after using my computer on battery, if I want to load, plug is not enough, I must remove my battery and replace. Charges of battery, 99%, once again.

    The problem is recurring and I don't know what to do anymore. I tried to get an empty using the BIOS battery (because Windows 7 turns off the computer when the battery is at least 5%), to see if there was a problem of calibration of the battery, but this isn't the case, and my problem is still the same.

    Hope you can help me ;)

    I recommend the update to the BIOS.

    Not sure if the solution in your case, but I read in some discussions that the BIOS update could solve battery problems.

    Otherwise if the BIOS does not help, then you should check if the new battery could be the solution.

  • Need help here with my Satellite A60 RAM

    Hi people

    Hope someone here can help me because I looked on the internet and come up with almost nothing.

    To put you in the picture. I bought my Satellite A60 at Hong Kong Airport and just him having when I saw how the screen was (seemed like a good idea at the time).

    The model number is - PSA60H - 00C 006 - this is supported by Toshiba China site I think, but I do not read Chinese.

    My problem is my RAM, I would like to level, but with what and in what order?

    The laptop at the back, which States:
    TOSHIBA 15XC 40 RW/DV 256o C2.8

    If I understand it, it tells me that I have 256 MB of RAM, but my reports only system 192 MB of RAM installed, is it his right?

    If I install more RAM, I'll have to change the 192 MB, or he can stay, or it is not editable.
    What is the Maximum of RAM this laptop will be except?

    Do you know where I can buy the RAM? part numbers would be very useful here.

    Thanks in advance for your help and time, people.

    Hi Steve,.

    Your notiebook reports 192Mo of RAM because it uses RAM shared for your graphics. The default allocation for the use of graphics is 64 MB that comes from your 256 MB RAM module, which leaves 192 MB for normal use of your laptop.

    You can leave your existing place 256 MB module and add extra RAM in the second slot, or replace the two modules. The choice is yours, but you'll always have 64 MB of RAM allocated for chart (unless you change this in your BIOS) for your laptop will never make the actual capacity of your RAM modules.

    HTH

  • Microsoft Bluetooth Mouse with my Satellite A60-122 issue

    Hi there;
    I'm a new user in this forum and this is my situation:

    I bought a Microsoft IntelliMouse Explorer with a USB Bluetooth adapter. When I plug the Bluetooth adapter to one of my four USB ports, bluetooth connection seems fine. However, I can't work with my new mouse. I have try all this on a Mac computer and mouse everything goes perfectly. I have not yet installed the driver! I don't know what is happening. I had installed the driver several times and it seems OK. DC when I search the mouse over the icon of bluetooth device, I see him there. However, the mouse does not work and when I open again the icon of bluetooth device, I can't see the connection bluetooth mouse more.

    My question was already posted by Sorin11 (08.12.05), and I would like to know if today, hopefully there is a solution to this problem of bluetooth.

    Thank you
    Antonio

    Hello

    Well, the Satellite A60-122 has no Bluetooth. In this case, you will need to use the 3rd Bluetooth driver and the device.
    In addition, the Mac has a completely different operating system and you can not compare the two devices.
    Unfortunately, I can't give you a correct answer, why this problem occurs. You should check if you are using the correct drivers. You should especially drivers for Windows OS.
    In my opinion, you should ask the manufacturers of the ItelliMouse for the support.

  • Several problems with my Satellite A200-1QZ

    Hello

    I'm sorry to open a new thread, but I already looked around for awhile and has failed to find the answers I need.

    Since I have several different problems, some of which are probably unique, I thought I might as well start a new thread.

    So lets start with the less important bits and get more important issues to light:

    1)

    I have some problems with my FN keys. While it seems that I can use some of them (FN + ESC, F1, F3, F6, F7, F10, F11, F12) there are also some that I can't use FN + F2, F4, F5, F8, F9, basically.

    How is it that some work and some do not, and what I need to do to get them all to work again?

    2)

    There are times, when the my screen goes black suddenly while I work, play or surf.
    This does not appear to be linked to specific programs or something, it happens completely at random.
    Sometimes it doesn't happen for weeks, sometimes, it happens two times a day.

    Normally this does not really pose problems, since all I had to do was turn the idle mode (power-led flashes orange), log in again and everything worked fine.
    But unfortunately 3 problem, so it no longer works.

    3)

    When I click on the power button - or even chose standby mode via the menu stop - the laptop won't "idle" mode, but the screen goes all black.
    As soon as I move the mouse or do something else, I wonder you connect again, so instead of the idle mode the laptop seems to go in sleeping mode.

    The main problem is that this sleep mode is not sufficient to treat the problem 2, so ultimately, my screen goes black and all I can do is to close completely by holding the button power for 5 seconds.

    Sorry for my English is not my mother tongue. Thanks for all the help in advance.

    Greetings

    Hello and welcome to this forum of technical support.

    I'm not an expert but will try to help you.

    # I put t know what operating system you use, but try to please install or reinstall Toshiba Value added Package.
    # Huh... never heard of something like this and this in standby mode is the solution to this. It means books works as usual but the display is suddenly black?
    # It is not easy to say what the problem is here. You can use Hibernate mode properly?

    By the way: are all hardware components installed correctly (Device Manager)?

  • Problem with my Satellite C870

    I have a problem with my toshiba satellite C870. The noise stopped working. the sound icon is cut and I got a message: no speakers or headset is connected. I tried corrections but I thought that my driver is up to date. For accuracy I am under W7. Sorry if my English is bad (I speak french, but you can answer me in English)

    Thks

    Hello

    Reach:
    Panel of-> sound-> the Read tab

    You see your speakers or headphones here?
    If so, make sure that the speakers are marked as the default device.

    In addition the combination FN + F11 would turn on and off MUTE.
    Check it!

    When two solutions of workaround don t help, uninstall the device high definition audio / controller as well as the audio driver from the Device Manager and restart the computer laptop n.
    After restarting again the system should install the uninstalled drivers even more often, this will help you to get the sound.

  • A few problems with the Satellite U920T-100

    Hi guys,.

    my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

    The questions are:
    -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
    -It starts not at all, only after a few attempts
    -It will not stop
    -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

    New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

    Also: WLAN connectivity is really bad.
    The laptop is not able to find networks, while my laptop has no problem with it.
    And when he finds them and connect, the connection be lost - once again: no idea why.

    That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

    I have reset factory?
    Run through some specific tests?
    Or is is hopeless, because there are so many problems with it?

    I'd appreciate your help!

    Hello

    > I should factory reset it?

    I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

    Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

    From my point of view, the recovery of the system is the first step, you should try to solve the problem.
    In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

    Hope my advice might help you a bit

  • Connection problem with the satellite C660 - 24L

    Hello world

    I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

    Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

    A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

    Computer behaving the same way when connected and disconnected from the mains.

    All other devices will connect to the router talk-talk with no problems.

    Any help is appreciated, thank you in advance.

    Lewis.

    Post edited by: lewlew

    Have you noticed a few problems if you use the local network connection?
    Original Toshiba WLAN driver is pre-installed on your computer?

    To be honest, it is not easy to say why this show is starting to happen so suddenly.
    Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

  • Some problems with the Satellite A210 - 11 p

    I bought my laptop Satellite A210 - 11 p in September last year, but over the few months Ive had some problems with it.

    1. it seems to be overheating to the point of not being able to touch the bottom of the laptop whose total stop me use it as a laptop. Is - this usual?

    2. the screen turns off after approximately 2 minutes after the connection.

    3. any ideas where I can buy a new charger?

    Can you help me?

    Thank you
    Mike

    1 could be an accumulation of dust in the radiator. An FSL can remove it for you, or you can blow with a can of compressed air.
    2 power settings? Perhaps the Toshiba Power Saver is set to decrease intensity when loading in the system tray.
    3. I think an ASP can sell you a.

  • Problems with its Satellite A100 and professional cards

    Hi all

    I bought an A100 Satellite less than a year ago and have had problems with 2 different business cards when using Cubase.

    -M-Audio firewire solo plugged into the TI PCMCIA card
    -Echo Indigo io (PCMCIA card)

    I am running Windows XP and Cubase SE/SX3. When running Cubase, there are cracks, the sound stops for a few milliseconds.

    I've never had any problems with my old Toshiba laptop Satellite Pro A40. It's very disappointing and frustrating. I use my new Toshiba for the Internet!

    Could someone help?

    See you soon,.
    Fred

    Hello

    This has been discussed in several topics, so please visit the following positions and get something for yourself:

    This one has a driver and registry solution:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18720

    But first, I recommend you to read this one:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18631

    It s long, so be prepared to read a lot. Hope you can solve your problem.

    Concerning

  • Problem with portable Satellite C650 of load

    Hi all

    I have some problems with my laptop Satellite C650 charge.

    When the charger is connected to my laptop, the battery shows "plugged in, not charging". Furthermore, the battery charge decreases or increases when the charger is connected to my laptop.

    But when I remove the charger, the charge on the battery begins to decrease. For now, I have maintained the charge on the battery to 83% (to always plug my charger for laptop) so that I can work on my laptop at all times.

    I can't decide if this is the problem with the external charger or battery inside the laptop.

    Please please suggest me how to solve the problem.

    Any suggestions would be much appreciated.

    Thank you.

    Seems that you have already solved as posted in the other thread:
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=254051

  • Problem with the Satellite Pro 2100 and new modules of RAM

    Hello

    I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
    My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
    Here is the code of the modules:
    KTT3614/256 (original)
    KVR266X64SC25/256
    256 MB pc2100 both.
    Starting the PC with any of them, as well as the modules are both compatible.

    Any ideas?
    (Sorry for my English but I'm Italian: D)

    Post edited by: DaK_TaLeS

    Hello

    the second location of memory perhaps is the problem.
    Try to start with a module in the second slot, first an empty slot.

    Good bye

  • Virus or a technical problem with Qosmio G30?

    My laptop is Qosmio G30-149. When I turm to YOU, I see that the screen is not 100% black, but it has some small little clear white points. When Windows logo to come, the entire screen has 10 white vertical lines (each line manufactured with something similar to the sign!), then calculate get frozen and encoding becomes dark. ID, I run Windows in safe mode, then it is OK. What is - this: Virus or a technical problem? My Norman antivirus software reports any problems with viruses. Help, please!

    Looks like a hardware problem, and in this case that it cannot be solved by a laptop user simply common.
    For the most part a defective part needs to be replaced.

    The G30 seems to be a new series and the guarantee to be valid.
    SO, don t waste time and communicate with the technicians of the ASP.

    Good luck

Maybe you are looking for

  • pages Web print and preview empty despite the reset config and confirming the printer is identified

    I tried to reset the topic: config and confirmed that my print is correctly identified in the config, and I uninstalled and reinstalled firefox, the two nothing helps. I get the same problem in firefox safe mode.

  • HP Simple Pass

    I need driver and software for Simple pass please. I can't find it here: http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=de&CC=de&DLC=de&sw_lang=&product=5307... which is weird... I have: Microsoft Windows 8.1 (64-bit) ENVY of HP dv7-7

  • Pavilion elite e9280t: hard disk failure

    My HARD drive has failed. Can I replace my ST3750528AS (700 GB, 7200 RPM SATA) with the last disk of 1 TB of Seagate (ST1000DM003)? They also offer a player of games, ST1000DX001, listed by Seagate as a SSHD, whatever that means. This player works as

  • How to deal with error 80070652 downloading Windows 10

    I'm trying to upgrade Windows 7 Professional to Windows 10 but get error 80070652 how clear this to install the upgrade. I'm not a geek, so it should be a simple procedure please. It is a 64-bit operating system

  • Error during installation of Directx 9 on 64-bit windows computer 7

    I just got a new computer running windows 7 64 bit. I have a few games that don't play and seem to require some .dll files for directx 9 (directx 11 is on the system). The problem is when I try to install directx 9, I get "an internal system error ha