HP 250 g4 laptop: Caps lock key flashes and touchpad not responding

Similar Questions

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• Pavilion dv6 - 7013cl - black screen with caps lock led flashes constantly at startup.

  The laptop was running hot. I cleaned the dust from the fan area. The battery is bad. I checked the voltage on the charger that was 43v - bought a new charger is 18.5 v. I wiped the ram and started with one and moved to different positions. I have now a black screen with the cap lock key blinks blue continuously and the f12 key led light ceases to orange. Any suggestions what I should try next and which snaps the seeing Cap continuously flashes means - that is a code or have a meaning?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Satelite P50-A-14F - Caps Lock key does not work

  Hi all

  My CAPS LOCK key does not work on my laptop series satellite P50-A-14F. Just realized while writing an email that does not work, so is more or less sudden. Nothing has been spilled on it. Here's what I've checked so far:

  -green light indicating that CAPS is LOCKED turn everything on by pressing the key on the keyboard of the screen
  -Keyboard backlight does not start when I press the button, but it works for the key itself when you press a button any.
  -try a clean boot but no results.

  Thanks a lot for your help.

  Hello

  > Just realized while writing an email that does not work, so is more or less sudden.

  Have you tested the button LOCKING of upper CASE using different software: Web browser, by word or any other editor?
  How about using the external keyboard?

  From my point of view, there are two possible malfunctions: either there is a problem with the software that you use or the internal keyboard works badly simply and in this case, the replacement of keyboard will solve the problem.

  You could test the external USB keyboard. In case the button LOCKING of UPPER USB external keyboard functions, then the internal keyboard needs to be replaced for sure.

• CAPS LOCK key.

  How can I get my HP dm4-2070US laptop beep when you press the CAPS LOCK key. Shift every time?

  Hello

  Open windows control panel, open ease of access Center, scroll down the page and click on the brand of the keyboard easier to use the link in the next window, put a check mark in the box against "turn ToggleKeys", then click apply and then click OK.

  Kind regards

  DP - K

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Caps Lock Code flashing

  What is the caps lock light flashes four times then stopping average. I have a HP Pavilion UD7-1243d. The computer will not continue to start and the screen remains black. I only tried a hard reset at this point.

  Thank you

  It seems that GPU

  LED flashes 4 times

  Graphics

  Non-functional graphics controller

  You can try a reset adifficiles - remove the battery and AC adptor - hold power for 20 seconds - release and then reinsert the battery and AC and try again.

  Here is the list of blink codes

  http://support.HP.com/us-en/document/c01443366

• Cap lock key

  I have a Microsoft Natural ergonomic keyboard 4000 and the Cap lock key does not work. Him on the screen does not work. How can I get the key to the lock on the lid to work?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Original title: Confirmation screen.

  How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Hi WalterAshton,

  You are welcome.

  If you want to provide feedback to the development team of Windows, visit the Microsoft Web site below:

  http://www.Microsoft.com/en-us/Windows/compatibility/en-us/CompatCenter/feedback

• "CAPS LOCK" key causes the delay

  Whenever I use the "caps lock" key, a pop up box appears at the bottom right of my screen and I can not continue typing until the box lowers, which always takes at least a total of five seconds.  This creates an intolerable interruption by typing.  How can I get rid of this pop up box?

  What the popup box to say EXACTLY (including all codes)?  It happens only with this key?

  Without knowing what the pop-up box, it is difficult to provide targeted - suggestions, but here are two that might help account given what you have provided.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Maybe that's a problem with the keyboard driver, software, or firmware.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers, software or firmware (and you need to do for the keyboard), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  For anything else (if the above does not solve the problem), we need to know the information in the pop-up box.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Disable the CAPS LOCK key.

  I did some research on the web on how to disable that pesky caps lock key, but I thought you guys could provide more reliable answers. I'm reasonably proficient with computers, but my fat fingers keep hitting the SHIFT KEY AND THEN EVERYTHING LOOKS LIKE IT UNTIL I have to REALIZE it AND REVERT BACK and re - type. I do it a lot and it's driving me crazy! Help please!
  Thank you very much!

  I understand that you have found some suggestions on editing the registry - they aren't so bad. If you don't want to download all of the files that allow you to disable the LOCKING of the capital LETTERS, you can create it by yourself:

  1. Press the Windows key + R > type notepad , and then press enter
  2. Paste to Notepad:
     

     Windows Registry Editor Version 5.00

     [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout]
     "Scancode Map" = hex: 00, 00, 00, 00, 00, 00, 00, 00, 02, 00, 00, 00, 00, 00, 3A, 00, 00, 00, 00, 00

  3. File > record under...
     • Select to Save as: all files
     • Enter the file name : disable_caps_lock.reg
     • Click Save
  4. Right-click on the created file > merge
  5. Restart your system

  In case you want to turn CAPS LOCK on again, you must remove this registry entry, so you must do the following:

  1. Press the Windows key + R > type regedit and press enter
  2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout
  3. Right click on the Card of Scancode > delete
  4. Restart your system

  I guess that it is perhaps the only way to turn off the CAPS LOCK.

  In case you still don't want to do this, Windows 7 offers something different to disable the LOCKING of the upper CASE. You can turn the ToggleKeys, then you will hear a beep when you press CAPS LOCK. To do this follow these steps:

  1. Press Start > Control Panel > access > easy access Center > make the keyboard easier to use
  2. Check the box to enable the ToggleKeys

• Caps lock key and its associated

  Any way to associate a sound to hit the SHIFT key?  How many times have you accidentally hit that caps lock key only lines of discovery 2 later that it was a mistake?

  Thank you

  You can go to control panel, accessibility, make the keyboard easier to use. Check the turn on the ToggleKeys. You will hear a beep when you press SHIFT CAPS LOCK, Numlock or SCROLLLOCK.
  
  --

  Dustin Harper
  E-mail address is removed from the privacy *.
  http://www.mstechpages.com  Microsoft News, support, FAQ, and much more!

  "ldb55066" wrote in message News: dd4900df-c362-4010-9 d 67-d8068466de96...

  Any way to associate a sound to hit the SHIFT key?  How many times have you accidentally hit that caps lock key only lines of discovery 2 later that it was a mistake?

  Thank you

  Dustin Harper * address email is removed from the privacy * http://www.mstechpages.com---aide Windows and Support Page

• How can I dissable i caps lock key

  How can I dissable i caps lock key?

  This program changes caps lock shift key ctrl

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897578

• No indicator dedicated the CAPS LOCK key.

  They old keyboard, there was a green indication light on the key itself, which is not present on the keyboard. Now, I realize account the new keyboard to affect all similar thinkpads, but I am posting this here is because my Thinkpad Edge (E530) has a digital keypad dedicated, thereby making me use the NumLock much more often

  I am aware of the software-sided fix often suggest windows 7: screen resolution > avancΘs > on screen

  However, the problem with that is that is that it groups the shift lock and numlock together. What if I want the NumLock to default and not is NOT shown on screen, but still want to be recalled to the screen if I [accidentally] caps lock on?

  Is there a solution to this, or is this another problem Lenovo neglected during the upgrade of the keyboard?

  Hi gleipnir,.

  The only solution I could offer would be to check online for 3rd party software, I did a quick search on Google for "caps lock indicator software" and found a few programs that offer on the screen recalls. I can't say that works best or even if it is an acceptable solution for you, only that it is the only workaround I can think.

  See you soon!

  Ed

• iPhone 6 more screen flashing and does not

  Hello

  For the last few days, my iphone 6 more screen starts flashing from the top and the touch screen doesn't respond. The phone is still under warranty.

  I went to apply here authorized service center in Singapore, they have looked at my phone and said, there is a slight inclination in the phone which will be considered physical damage where it can not be repaired / replaced under warranty, I have to bear the cost.

  Now, as I read on the forums, this is a problem of very well known with the iPhone 6 Plus, also, I don't see no noticeable turn in the phone of my eyes. I'm sure that this issue is not because of any physical damage, but as a result of an internal manufacturing.

  I'm really disappointed with the service of Apple. I don't know what to do now. Should I try to go to any other authorized service center and see what they say?

  Any advice would be appreciated,

  Thank you

  Rohit

  I started having the same problem with my Plus 6. I took it to the Apple store today and the tech told me that it is a known issue that they see a lot. They hope that Apple will issue a recall notice. My phone is out of warranty, so they would be out swap with a unit refurbished for $329. The real kicker is that he said that they have the same problem with a lot of devices refurbished right out of the box. My options are to keep a phone that keeps flashing and does not or pay $329 for a replacement who may have the same problem that has my current phone. It's really bad assumption of a product!