Victim of theft of copyright message need help

I have a pc with windows XP Professional that has been pre-installed by the company, that I bought.  This pc had a hard drive failure and so I bought a new hard drive for it but could not get the recovery CD to work because it was not bootable.  I bought a copy of Windows XP Professional from a professional seller on ebay who said that they were authorized distributors.  The software installed ok, but when I went online to save it with the supplied key I got a message saying that I had been victim of theft of copyright and my pc locked up.  I reformatted the hard drive and then deliver the software and tried my old original key of the original pre-installed version to see if it works, but it works now.  I informed the ebay of the situation that this person is clearly not an authorized dealer.
I hope that someone can help me because I have a pc that I can't use it with a new hard drive: o)

I hope you can get satisfaction from the seller or eBay.

If this is not the case, go to the web to report suspected piracy of Microsoft site.

Tags: Windows

Similar Questions

  • "unknown device" message - need help!

    during the installation of pc suite for my mobile LG GW520 froze my computer and I was forced to interrupt the installation via the Task Manager. now my computer does not recognize my phone at all and I can view photos and videos that I have before in "mass storage" mode How to solve the problem of "unknown device"? have tried conventional methods such as remove all traces of drivers installed, reset my phone to factory and then using the plug-and-play method again, but it did not work. any help would be greatly appreciated, thank you!

    Hello

    Other devices work properly?

    The LG below blogspot link talks about a similar question. You can follow the steps mentioned in order to solve the problem.

    http://www.lg-phones.org/LG-versa-tips-resolving-Windows-Device-Manager-conflicts.html

    THIRD PARTY LINK WARNING

    WARNING: Microsoft provides no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

    Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Email and messages need help blackBerry Smartphones

    Hello. I'm new in the world of BB and I just go this great gift that I am slowing learning how to use.  I prowled around for awhile and now it's my turn to ask a silly question.

    On my BB Curve 8330, I have a picture of my son on the front screen. I don't know what a theme, but I have 5 icons at the bottom of the screen.

    I'm having a hard time with my "message" folder and my mail folder electronic ***@comcast.net.

    the problem is, my emails are sent to both folders.  my email (the world with the envelope) and message (mailbox) file. I'm just a pain to remove all of the two places.  I read here in one of the forums how you could also do your separate sms/mms, I did. but then I got three folders.  So in my folder of message it shows me, my email and my calls missed.

    Is it possible that I can stop my e-mail to go to both places?

    I need, step by step... I'm not ignorant, but my book was missing from the BB when it was purchased, so I'm waiting on a new instruction book which should be here tomorrow.  I think I'm not too bad, thank you to all of you on this forum!

    Looking forward to your responses and thanks in advance...

    Laura

    Messages are stored on your device the volume you want.

    Go to the messages main folder, press menu, options, General options and scroll to the bottom to keep the Messages, you can change the duration between 15 days to Forever.

    Please mark the thread has been resolved, is more better for other users to find answers to the same question.

  • Need help with slui message with the Validation Code: 50

    OT: need help with the message 'victim' slui...

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 50
    Code of Validation caching online: 0xc004c4a2
    Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
    Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
    Windows product ID: 00371-702-8613485-06367
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.150928 - 1507
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
    Installation ID: 022214046070387640229264400212325972472065330163335456
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: X7D3P
    License status: Notification
    Reason for the notification: 0xC004F200 (non-genuine).
    Remaining Windows rearm count: 4
    Trust time: 12/01/2016 11:28:57

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0xC004C4A2
    Beyond: 0 x 0000000000000000
    Event timestamp: 1:11:2016 12:55
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC1425 APIC 060111
    FACP 060111 FACP1425
    HPET 060111 OEMHPET
    MCFG 060111 OEMMCFG
    LASRYVITRAGE OEMB1425 060111
    ASPT 060111 PerfTune
    OEMOSFR OSFR 060111
    SSDT DpgPmm CpuPm

    Hello

    Thanks to everyone who responded to my question.

    Turns out it would not activate the system properties page.

    He did, however, turn on the tool online browser without a

    hitch. Yes, problem solved.

    Jon

  • guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

    The guys that I need help please,

    Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

    I need help please

    Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

  • can receive messages but can't send on outlook express, need help

    Was just good with this computer that uses windows XP and have added my name is outlook express account. Things were going along fine until it tries to send a response to a current e-mail was greeted with an error message "secure (SSL). ' No, Error.10061 Socket error #0x800CCC0E ' and my message is stuck in my Outbox. Am at a loss to know how this can be resolved and of course need help...

    Check: File | Work offline and in: reviews | Layout: uncheck the preview pane and you should be able to delete the message.

    The account is probably not configured correctly. Double check your settings and if you don't get developed, after back and say EU your e-mail server and send an error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

  • have dell dimension 4700 xp need help with outlook express I have error message and can not send email

    I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get.

    Thank you, Gina Davis

    I have

    He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service.

    How to add your Hotmail e-mail account to Microsoft Outlook Express
    http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

    If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail.

  • Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

    Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

    This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

    I want to thank all in advance for your answers.

    Nelson Santiago

    Hi NELSONSANTIAGO,

    1. when exactly you receive the error message?

    2. is the Belkin easy transfer cable recognized by the Windows XP computer?

    This file may be located on the Belkin Easy Transfer Cable installation disc.

    For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

    http://en-UK-support.Belkin.com/app/product/detail/p/4825

  • Error message "cannot start mssql$ sqlexpress on machine" need help!

    Error message "cannot start mssql$ sqlexpress on machine" need help!

    Hello

    -When exactly you receive this error message? It is at the start of the computer or at the launch of a particular application?

    If you use SQL Express DBMS and are faced with this problem, thanks for posting your query in SQL Server Express Forums for assistance on this issue.

  • I need help fixing error 340... only, I get this message when I try to send an email... there at - there a way to fix this error free?

    I need help fixing error 340... only, I get this message when I try to send an email... is possible to fix this for free?

    You must ask Yahoo.
     
  • Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

    Hello

    Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

    Hi ErikLee,

    Do you have MS Outlook installed on your computer?

    Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
    If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

    Follow the instructions below and check if the problem is resolved.

    1. reboot your computer, and then start Windows Mail.
    2. on the Tools menu, click Options.
    3. in the connection tab, click on edit to open the Internet Properties dialog box.
    4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
    5. click OK again to close the Options dialog box.
    6. exit Windows mail and restart Windows mail.

    If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

    To download Windows Live Mail, visit the following Microsoft Web site:
    http://get.live.com/wlmail/overview

    For more information about Windows Live Mail, see the Microsoft Web site at the following address:
    http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

    Check whether the problem is resolved.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • I have a problem, try to uninstall the ask toolbar. get the error message: cannot access the VB script... need help please

    I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help

    Hello

    How do you try to uninstall the toolbar?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Try the steps in the following Microsoft article and check if it helps.

    How to fix script errors in Internet Explorer on Windows computers:

    http://support.Microsoft.com/kb/308260

    Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521

    Method 2:

    Try to uninstall the toolbar, programs and features and check if it helps.

    Uninstall or change a program:

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    Hope the information is useful.

  • everytime I open a window or application, a message goes out _Windows stopped fonctioner_ please I need help

    Hi... "my system is windows vista professional" the problem is that everytime I open a window or one application other thing... a message goes out _Windows has ceased to operate _ Please I need help

    Hello

    I suggest you perform a boot clean and check whether a third-party program is causing the problem.

    Refer to this article for help:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135


    Note:
    please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • I desperately need help.  I get the message error message when visiitng my URL on mobile device!

    Hi all

    I desperately need help.

    When visiting my website on a mobile device this message, ('some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »)


    I talked to my hosting company and they say it's to do with the script and this must be changed. They gave me a link to a Web site with instructions. CodingForums.com as with most people using Muse the reason we use it is because there is no need to use the code. I don't really have no where to start with this.


    Y at - there anyone out there that can help me. My URL is entertainment - isle.com


    Thank you

    Who is your hosting provider?

    Clearly your webhost changes the files that are served. If you go to http://entertainment-isle.com/phone (or http://entertainment-isle.com/tablet) in a browser desktop all the files of the phone (or tablet site files) site are well served and the site works properly. However, if you go to the same URL using a mobile device files that are served are different. I suspect that your webhost think they do you a favor, and they have a code side server that modifies the files being served when they go to a mobile device, with result a site broken. Chances are it is something you, or they, can turn off to your site.

    If you provide the name of your hosting provider, we are able to collect information on their website how (and why) they want to change the files that are served and how to disable this "feature".

  • Hi, I'm trying buy Adobe Creative cloud but get message "this card was purchased in a country that does not match your Adobe ID you can try to connect with a login different Adobe or contact us if you need help."

    Hi, I'm trying buy Adobe Creative cloud but to message "" this card was purchased in a country that does not match your Adobe ID you can try to connect with a login different Adobe or contact us if you need help. ' "

    Can anyone help with this please. Thank you

    Hello

    Please visit the link below: -.

    Redemption code help

    How activate/redeem redemption Adobe CC Code

Maybe you are looking for

  • Why my Apple Watch impute watch OS 2.2.1 update tp?

    I have the Apple Watch 42 MM Edition gold with black classic loop running watch OS 2.2, and I wanted to update to 2.2.1 watch OS even if it is fully charged and disconnected, just like the iPhone, you can remove the load and updated, but I don't know

  • How can I stop my airbook to save my Excel worksheet every 5 minutes?

    How can I stop my airbook to save my Excel worksheet every 5 minutes?

  • What to buy... EA6500 or EA6700?

    Hello Decided to buy one of these, but which is generally better for 2.4 and 5.0 ghz wifi (N and AC)? The EA6700 costs only £10 UK and more, but can't decide between the 2. Have ports USB 3.0 on the EA6700 is no big deal for me, for me as I will not

  • CCX 9.0 Wrapup time per Agent, team or a workflow

    Hi all Quick question; UCCE you configure Wrapup time by agent or team. This logic as teams normally equally share work and queues are shared between several teams. The CCX, I saw that times of synthesis is configured on CSQs and Agent Based Routing

  • Pre-loaded packages Oracle

    Hi allI'm confused about the following:When I query the view object in my diagram to see the packages I have access to, like this:Select the owner, object_nameof objectwhere type_objet = 'PACKAGE '.I get a list of the packages and the SYS package. DB