HP 2600n: do not print on the right side of the book
Installed all new four toners. Black was printed ok before, only not red...
Got help on this forum to solve the Red print problem, but now the new problem is the right printer print clearly on the left side of the paper, the black GET lighter and lighter then appear in white on the right edge (about 1/5-1/4 of the worksheet), impression resembles black toner course. Please help me fix this problem. Thank you!
If only the black may be the toner cartridge went wrong. If other colors, then you need to double check all connections to the repair of the Red number again. Maybe something has worked itself is loose from the previous repair.
Tags: HP Printers
Similar Questions
-
Does not print without the rights of administrator - Toshiba e-studio 2
Excuse for my English.
A question: does not print without administrator rights.
I do not know is that a problem?As it is possible to allow for the press with the rights of the user.
Toshiba e-studio 206
Hello
You intervene on the Toshiba printer
According to your message, the printer does not and doesn't print because the user does not have authorization right.
You can change try to assign the admin right to the user account.
You can also try to assign only a right to the user account.
In this case go to-> printer & faxes Control Panel
Choose the printer-> right click-> properties-> tab securityThere you can assign printer preferences
Welcome them
-
Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.
Hi rkusa1,
Thank you for using Microsoft Windows forum
QuickBooks worked very well under Vista? It should also work reliably on Windows 7.
However, you may want to follow these steps.
1. right click on your quickbooks start exe file and open properties.
2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)
3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.
4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.
5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).
6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing
7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.
8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.
9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).
You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)
For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5
If the steps above do not post your question in this link: http://community.intuit.com/quickbooks
Kind regards
Aziz Nadeem - Microsoft Support -
Printer not print indicating the print spooler is stopped and does not restart
Original title: printer does not print
The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.
David Torres
Hi David,
Thanks for posting your question in the Microsoft Community.
I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
. Have you made any recent hardware or software changes to your computer before the show?
Please follow the methods and mark the question below:
Method 1:
Step 1:
Run the Microsoft Fix It from the link below.
Diagnose and automatically fix problems printing and printer:
http://support.Microsoft.com/mats/printing_problems/
Step 2:
Follow the steps in the link below.
Printer in Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2:
You need to check if the Printer Spooler service is started from services.msc.
a. click Start, click run, type services.msc.
b. double-click the print spooler and verify that the status is set as Automatic or Manual.c. right-click on print spooler and click restart.
Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.
I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler. ERROR 1053 the service did not demand launch or timely control.
What can I please? -
Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!
Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!
Hi, Rlayhee,
Printer brand/model?
Start > Control Panel
Select the Printers folder
Right-click on the printer icon, then select open
Are there pending print jobs
If Yes, click on file > cancel all Documents
Close the print queue and the printer folder
Try printing again
Start > right click on computer
Select manage
Select Device Manager
Click on the + sign next to the Ieee... compatible printer (if any)
Right-click on the driver and select uninstall
Click on the + next to imaging devices
Right-click on the driver and select uninstall
Click on the + sign next to printers
Right-click on the driver and select uninstall
Click on the + sign next to Bus USB controllers
Right-click on the driver and select uninstall
Close the Device Manager
Restart the computer to Windows to reinstall the drivers
Go to the manufacturer's website and search for driver updates
Try printing again
-
Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.
See this:
http://KB.mozillazine.org/Problems_printing_web_pages -
HP Deskjet 2132: The date showing on my screen but does not print on the sheet.
The header and the footer shows on my computer screen, but it does not print on the print current sheet.
I tried the solution, but it did not work, and the strange thing is that if I change from Portrait to landscape of the date part prints but not all of it. 21/02/16 just found the problem. I was using the Google Chrome browser and I switched to Mozilla Fire fox. Walla, the problem has been resolved. Thanks a lot for your help. I don't know much about computers so I'll have more questions later.
-
My Canon MX330 printer is not printing and the In use/Memory light on.
My Canon MX330 printer is not printing and the In use/Memory light on.
Hello
If this isn't a driver problem there is a problem of setting or material and you
need to contact Canon.As Canon OEM is responsible for the good operation of the printer and their
drivers provided. Check with Canon support, online documentation, and
drivers.Good luck, you need to update or reinstall the latest driver.
Canon - PIXMA MX330 - software and drivers<- select="" your="" version="" of="">->
http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx330#ServiceAndSupportCanon - Support and drivers
http://www.USA.Canon.com/Cusa/support/consumerCanon - Support - contact us
http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumerCanon - Windows - Vista and Windows 7 support
http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupportCanon printer - page local confirmation - could be from another region.
http://pdisp01.c-WSS.com/OS/====================================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP. PAUL LACNY * address email is removed from the privacy *.
Hello
Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).
As OEM HP is responsible for the good operation of the printer and their drivers. Check with
HP support, their documentation online and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
you have - then select your version of Windows.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
suddenly, I could not print because the computer cannot identify the printer
Original title: printers
I have windows XP Professional and a printer is connected to my PC, all of a sudden I could not print because the computer is unable to identify the printer. I unplugged the printer and plugged again and I turned off the computer, as I went to adding hardware but without success. could you please tell me how to restore the printer connection. In addition, the printer icon appears at all when I plug the printer cable
Hello
I suggest you run the difficulty mentioned in the link below:
http://support.Microsoft.com/mats/printing_problems/en-us
Alternatively, you can follow the steps mentioned in the link below to fix the issue:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Hope this helps
-
laser jet pro M127fw MFP: printer will not print from the computer
printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.
now, the does not print from the computer. Everything else works fine. (copy, scan, fax)
Internet works. Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print
nothing happens.
Hi @kartman,
Welcome to the HP forums!
I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!
How is the printer connected? Ethernet or USB?
In the meantime, please try our HP print and Scan Doctorand let me know what happens!
If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
Hope to hear from you soon and thank you for posting!
-
My kodakESP5 will not print all the object I want to print only a part of it
My kodak ESP5 will not print all the object I want to print only a part of it
Hi jakenny,
You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.
Follow the instructions below that may help you resolve the issue.
Method 1:
See the link below and check the print settings.
Choose printing options
http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options
Method 2:
Try to update the printer driver which might help you resolve the issue.
Click on the link below for more information on the updated printer drivers.
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Check whether the problem is resolved.
For more information, please see the link below.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
The text that I added a file .pdf (& sometimes comment boxes) appear not when I print the .pdf. He is used to. Same thing with stamps, they are not printed on the document and they used to. Do you have a something accidentally disabled? I have Adobe Acrobat XI Standard.
In the print dialog box, choose "Document and brands."
-
text does not print on the bottom of the page
text in black does not print on the bottom
Hello
First, try a hard reset with the printer.
Hard Reset:
Unplug the power cord from the printer and the wall
Take out the toner cartridges.
Wait for 30 seconds
Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)
Replace the toners/cartridges in the printer
Let me know the results
-
Conditional liquid do not print when the conditions are met.
I build a simple menu in British Colombia and for the purpose of this project, I'm going to be exposing this menu without using Module of menu in British Colombia. I use the following code:
{% If globals.user.isLoggedIn contains 'true' %}}
< id = "my-account-link" li > < a href = ' / my account "> < i class ="fa fa-diamond"> < / i > < span class ="-animate "> my account </span > < /a > < /li >
< id li = "settings-link" > < a href = "/ my account-#settings" > < class i 'fa fa-sliders' = > < / i > < span class = "-animate" > my settings </span > < /a > < /li > ""
< id = 'link-support' li > < a href = "/ my account/help" > < i class = "fa-fa-question-circle" > < / i > < span class = "-animate" > support </span > < /a > < /li >
< id li = "logout link" > < a href = "/ LogOutProcess.aspx" > < class i 'fa-fa-sign-out' = > < / i > < span class = "-animate ' > Log Out < / span > < /a > < /li >" "
{% other %}
< id li = "connection-link" > < a href = "/ login" > < i class = "fa fa-sign-in" > < / i > < span class = "-animate" > Login / / Sign Up </span > < /a > < /li >
{% endif %}
I have used before with other snippets of code and this liquid condition print very well. For some reason, when I test the newspaper, the State still shows the wrong code even when I look through the JSON printed in the console object and the object user loggedin contains the value Boolean 'true '. Sort of at a loss as to why it is not printing when the user connects. Really want to use liquid on it and do not have to revert to the version JS of the hiding items.
Thanks in advance to all! Best wishes!
Well, I feel stupid, I was following the copy and the tutorials BC and pasted. Realized that I had to use operators such as "is" appropriate and «!» = ». I fixed it now
Maybe you are looking for
-
Satellite Pro L10 (PSL15E) - hard drive is faulty
First time poster. I'm trying to get the laptop working above and I think that the hard drive has failed. Is the question I have, I can replace it with a hard drive with a capacity greater than the 40 GB drive currently installed? Is there a limit to
-
I have a HP Touchsmart 9100, providing no video. This is not a software problem, because I took the hard drive and impossible to see bios or other screen. I'm ready to replace the MB or the video card, but I can't understand where is the video port o
-
How can I get out of the mode of recovery on my nano without restoring
I have a 4th Gen ipod nano. Screen went black, I tried to reset (by pressing menu and Center button) without success. Nano plugged into pc, dialog said in recovery mode, need to restore for nano to work in iTunes, I don't want to restore because I
-
somehow more panoramas for the game's low-security
Hello, my name is richard Rivet of beamsville (Ontario) My problem is: I like to play MMORPG and I've always had a blast playing on my old computer but I recently upgarded to windows vista and now whenever I download new MMORPG and go to connect to a
-
Removed, Java won't let me not re - install, I've always said