HP 2910 al Switch Firmware issue

Similar Questions

• 40RL953B firmware issue and it does not start

  Hello

  After the firmware update, my 40RL953B is no longer in effect. I have a green light on the left front is on but nothing on the right and the remote control or switch those who work. Connect the input/output after 10 min makes no difference.

  I need a firmware to be flashed and to do this, I will need Init_clear and MBOOT files for 40RL953B. There are other sites, offering them on the other site, but I can't find it for my model. Toshiba said they are to pick up and return at their support center, but in reality, all that I need is a correct initialization file and firmware to Flash the current corrupt firmware.

  Anyone who can help on this?

  The site I found are those below:

  http://forums.Toshiba.com/T5/televisions/TV-40TL933-wont-start-anymore/TD-p/332352
  http://www.AVMagazine.it/Forum/107-disc-Ufficiali-LCD-full-HD/226085 (used Google Translator)

  Hello
  Can someone please give me a MBoot.bin file and the INIT_CLEAR file for model 40RL953B?
  I really need as technical support Toshiba told me that they can be obtained only by a certified toshiba technical support...
  All I need is them and then Flash the firmware so that my TV will be back, but toshiba is denied and just tell me to return the unit/back which will take days...

  Please help me on this

  Kind regards

• Switch firmware DAQmx/DAQmx Base 6009

  I installed the driver NOR-DAQmx base v3.2 on Ubuntu 8.10.  Thanks to all the previous posters for the detailed instructions!

  lsdaq is not the 6009, lsusb shows that it is connected.

  I understand that I have to re - join the 6009 'DAQmx base' by updating the firmware.  I ran the FWUpdate provided with 3.2, but like the lsdaq, he does not see my 6009.

  I installed DAQmx v8.8 on my windows xp machine and is seeking to swap the firmware by following the instructions in the KB 3NE7GJMY as shown below:

  Solution:
  NOR-DAQmx 7, 5-8, 5 (recommended method)

  Switching of NOR-DAQmx Base

  1. Open the Windows Device Manager:
     • Right-click on desktop and select Properties.
     • Select the hardware tab and click Device Manager.
  2. Find the USB-6008 box under data acquisition devices.
  3. Right click on the USB-6008 box and choose Update driver...
  4. In the context menu which appears, select install from a list or specific location and click Next. (Note: this isn't the default selection)
  5. In the next window, choose do not search. I will choose the driver to install and click Next. (Note: this isn't the default selection)
  6. Select IO multifunction NI USB-6008 and click Next.
  7. This will put the USB-6008 housing in a mode of reception of the NOR-DAQmx Base firmware. The device should now appear in the device under Device USB of NI-VISAManager. If he does not appear or appears with a yellow exclamation mark, please disconnect the USB cable from the device and plug it in again. This should make the device list again properly.

  Steps 1-5 works well, but my options for the selection in step 6 is "USB-6009' not ' NI USB-6008 multifunction IO.

  I select "USB-6009" but when I hit "Next", it updates the driver immediately and said the "end of the upgrade wizard to update material.  Then, it tells me that "the wizard has finished installing the software for USB-6009" when I click on 'Finish', the wizard closes and I'm right back where I started.  I never have a chance to go to the step 7 above.

  The Alternative in KB 3NE7GJMY method suggests using MAX and do the following:

  "" Select Tools > Configuration of NOR-DAQmx > Driver NOR-DAQmx USB selector ".

  When I do a popup appears that reminds me of 491FPHB9 KB that points then back to KB 3NE7GJMY and again, I am right where I started.

  It was supposed to be the easy part.  The KBs reference DAQmx v8.5 and low.  I have 8.8.  If something has changed?

  Thanks in advance,

  Mike

  Hi Mike,.

  I just want to confirm that with Windows Xp
  SP3 DAQmx 8.9 (latest version installed) and DAQmx Base 3.2 I could
  to get a USB-6009 to a DAQmxBase device.  I was able to
  re - associate the driver so that the device show in Device Manager
  as IO NI USB-6009 multifunction.  I just followed the directions in
  3NE7GJMY KO OF #.  My only recommendation at this point would be to check your version numbers on DAQmx and DAQmx Base.  It doesn't sound like DAQmx base was not installed correctly, because we do not see the second driver in Device Manager.  I suggest you to re-setup DAQmx Base (note there is no need to uninstall DAQmx for this).   Let's try and see if we can get the second driver is displayed

• HP Pavilion p6330f and Windows 8 - firmware issues as possible

  Hello!

  I installed Windows 8 on my (greatly improved) p6330f... and I have a few problems that were fixed with updates of the firmware posted on the page for this model of computer.   I installed the updates of the firmware under Windows 7, and there is no version of Windows 8 updates.

  Here are the updates that are on the page-

  BIOS: fixed fan speed< i="" am="" having="" this="" issue="" again="" while="" running="" windows="">
  SATA hard drive update: data is not properly registered< i="" am="" having="" this="" issue="" again="" after="" running="" windows="" 8="" (especially="" with="">

  New versions of the firmware we will post for Windows 8, or I come to Windows 7?   Please advise...  I updated all parts of this machine in addition to the motherboard and processor (16 GB DDR3, 2 TB drives, AMD Radeon HD, the new power supply graphics card) and I have tweaked Windows 8 to a point where I like it so I don't want to go back to Windows 7.

  Thank you.

  card BIOS update mother MS-7613 and the SATA hard drive Firmware update has been permenently wrote in the BIOS of the computer chip and the chip of the firmware of the hard drive. The updates actually changed the code in hardware and change the operating system will not cancel these changes. The BIOS/firmware updates are still part of the material regardless of the currently installed operating system. The reason why HP lists updates that are compatible with Windows 7, because their installer has only been tested for use with Windows 7 and the controls to see that Windows 7 is installed before upgrading the system.

  No update of Windows 8 will be available for your computer because of his age. You can check your BIOS version to verify that it is still in the v5.15 and you can do the same for the hard disk and make sure it is "BX". Other than that, the computer is not supported by HP for use with Windows 8 and HP will not provide drivers or updates for the computer.

  BTW... I see that you have two of the same post... label, and the forum rules dictate a single post for a specific subject.

  Please send Bravo

• Animation switching Office issues

  Does anyone else know a different animation in the Yosemite Sierra? Switching between desktop computers, the files animate as well and will be geek sometimes. Just curious, if it is a bug. I also have problems with the desktop image not resizing not between my Apple screen and the laptop, but one thing at a time. Thank you!

  Link to screenshot: https://www.dropbox.com/s/tl2bb1el5p4trs7/Full%20Screen%20Switching.mov?dl=0

  Hello SixThreeThree,

  Welcome to Apple Support communities. I see your message and your video as the glitch icons visually in the transition from desktop computers. I know it shouldn't. I'll be more than happy to help.

  Since it is a Visual problem, I recommend you to reset the NVRAM. This is the temporary video memory. Instructions that are below:

  How to reset the NVRAM on your Mac - Apple Support

  Once done, test to see if it happens again. If so, it wouldn't hurt to test this question on a new user. Take a look at this article:

  How to test a question in another account on your Mac - Apple Support

  Take care!

• Camileo X 100 firmware issue

  I bought 2 x 100 camileo which behave differently.
  I would like to have the program to read and write the firmware
  do the same behavior of two video cameras.
  Thank you very much

  > I would like to have the program to read and write the firmware
  Make another offer cam manufacturer these programs?

• Camileo H20 - Firmware issues

  When I bought the H20, I thought it was great.
  It's great, but there are a few negatives.

  1. poor quality in low light, maybe they should investigate this thing.
  2. If you set the stabilization on the menu and you turn off your device, you need to sign up again.
  3. the battery runs out pretty quickly.

  It is still a great camera, but they should do a Firmware Update for it.

  My can do MOV video files.
  Where I can find a firmware, when the camera's do AVI files?

  Help me pls :)

• UNRESOLVED: df800b2 8 '' Digital Photo Frame firmware issues

  Do not think that someone other than HP can help about this, because it requires updated firmware update for the frame!

  Third time to post is a charm - last one I clicked the button "Resolved?" and it enabled "Accepted Solution" and now I can't cancel that and suspect that previous thread is ignored.

  -------------

  I have the image of df800b2 and the photos are not displayed in sequential order (they jump around a bit in sequential mode).

  used file names...

  001_MG_2755.jpg

  002_MG_2756.jpg

  003_MG_2757.jpg

  004_MG_2758.jpg

  ... etc...

  By any measure, these are sequential file names!

  I understand that there is a firmware update available, according to the comments on other forums.  Can HP please post the updated firmware for this forum or PM it me at least?  There are many bugs in the firmware originally supplied with the chassis and I think HP should blithely seek to make their customers happy with the purchase of HP products!  This firmware update should be available.

  My framework model is "df800b2-16".  I can provide S/N on request email from HP, if that's what it takes.

  ----------------

  As an experiment, I even changed all the names of the file 001.jpg, 002.jpg, 003.jpg... etc.

  He still jumps around (jump 2-3 images back anyway - not 100% sure how, but clearly to jump some photos) and about runs in the REVERSE order. (Top number first!)

  This is clearly what is expected in a "sequential" display of images!

  ------------------

  Next experiment was to 10 images with the name of the file (number) on each image... 001.exe jpg by 010 jpg file names.

  Value sequential mode, 5 seconds interval, no transition, read CF card, I get the following "sequence":

  5,4,6,3,7,2,8,1,9,10, 5,4,6,3,7,2,8,1,9,10... (repeat this pattern - sequential sentence!)

  I tried to rename it to 1_001.jpg through 1_010.jpg with the same results!

  ---------

  HP - please send/post fixed firmware!

  A command prompt ANY reply appreciated!

  OK - finally got this addressed.

  See: http://h30434.www3.hp.com/psg/board/message?board.id=Other1&message.id=514#M514

• LABVIEW NXT LEGO firmware issue

  Hello world

  I'm trying to connect with labview NXT LEGO mindstorm robot, I installed the latest version of LABVIEW toolkit. but when I tried to connect the NXT it gives me this error that I do not understand why, because I have the latest version of the toolkit installed on my PC with LABVIEW 8.6 and updated in NXT firmware to 1.05. even if I tried with 1.04 and 1.02, but it is still giving me the same error (attached). anyone has idea what's wrong on my side?

  Thank you

  forward

  Concerning

  Hussain...

  The latest version of NXT kit is 2.0, which was released recently. If you use this version of the Toolkit, the firware version should be 1.26. If you have installed NXT toolkit 2.0, you can update your firmware 1.26 using tools > NXT Modules > firmware update.

  To download 2.0, please follow the instructures on this page:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4435

  Please let us know if this solves the problem.

• T4i Factory Firmware issues

  This week, I bought a used T4i / 650 d.  As soon as I turned it on, I noticed something strange - it makes beep power up (also coming off auto power off the coast) and the amber self-timer lamp lights whenever you press the shutter.  I called Canon and the rep was perplexed at first, but we have determined that the factory firmware remained very likely on the camera after an interview.

  For the record, it indicates worm.: 5.5.9 82 (28)

  Has anyone else experienced this?  If so, are there problems besides the beep and Timer light that the presence of the firmware factory could cause?

  The representative said I could send it and they might fix the problem free of charge, but after being without a camera for a month, I have to go back and be without a camera for two weeks while they fix it.  I can live with the beep (although I was always a fan of quiet camera) and the light is annoying, but can be circumvented.

  To answer Bob's question, the card in the camera is that I used with my old T4i.  I tried a regular format and the low-level format and there is no change.

  Since I have an assignment this weekend, I'll have to use it, and after that - as a huge pain in the anus as it is, I guess I'll return and literally pray that there is nothing more wrong than just the problem of firmware.

  I guess that my lucky streak of nine years of purchasing equipment without problem has finally been broken.  From now on, I still do not regret used because for someone like me on a budget of starving artist, the extra $200-300 new purchase would have destroyed me financially purchase.

  Thank you all for your answers.

• Switch firmware with rocket?

  I was thinking, since the "rocket" is a miniature version of the view, it wouldn't have the same firmware? I used the "rocket" before and nothing was really different. Can I just install the Fuze firmware on my opinion? I was looking through the latest version of firmware notes Fuze and there's a whole bunch of things that people have asked. (such as the speed of the wheels accelerated during the long navigation, the GoList expanded to 200 titles, etc.) I want just a new firmware, as we all do.

  Thank you

  -pabloman456

  pabloman456 wrote:

  I was thinking, since the "rocket" is a miniature version of the view, it wouldn't have the same firmware? I used the "rocket" before and nothing was really different. Can I just install the Fuze firmware on my opinion? I was looking through the latest version of firmware notes Fuze and there's a whole bunch of things that people have asked. (such as the speed of the wheels accelerated during the long navigation, the GoList expanded to 200 titles, etc.) I want just a new firmware, as we all do.

  Thank you

  -pabloman456

  Nope. The firmware is written based on material for the player, the "rocket" has different hardware.

• Xperia M4 Aqua E2363 double 5.0 Lollipop 26.1.B.2.147 Firmware issues

  After updating my Xperia M4 Aqua double E2363 India at 5.0 Lollipop 26.1.B.2.147 firmware, I can't Fastboot or Flashmode mode in windows. He says does not recognize the USB device on windows and the phone goes to the battery. I've updated the drivers, is to work on 26.1.B.2.129, but stopped after update
  anyone else having this problem.

  @Rohit_Bops

  That doesn't seem right, contact your Local support

• Officejet Pro 8600 firmware issue

  My regular apps will be printed, and I get the message that there is an error internal processimg and check the firmware updates.  My printer shows a firmware version of CLP1CN1435AR; This version does not appear on the site of HP, which is still showing 1322.  If I try to reinstall the version of 1322, that it cannot find my printer.  Please tell us what can I do to solve this problem.

  Thank you.

  HP was the removal of some series of applications, the daily crossword is one of them. It is more than likely the root of your error.

  Try to log in to HPConnected and search for another crossword application. I know that's not a solution, but I hope that you are able to locate another app that will fill the shoes of crossword every day.

  Kind regards

• GANYMEDE + with 3560 cisco switch configuration issue

  Hi Forum,

  Here's my setup GANYMEDE + on my cisco 3560 switch and my question is, how can I configure the switch, if I would not type enable after I put the user name and password? with configs below, users will need to type activate whenever they connect to the switch in order to enter the user exec mode. Please let me know if there is something missing in my configs to help me avoid typing 'enable '.

  Thanks in advance,

  MacBookAir: ~ MacBook$ ssh [email protected]/ * /.

  Password:

  Switch > en

  Switch #show run | include the aaa

  AAA new-model

  AAA server Ganymede group + mpcc

  AAA authentication login default group Ganymede + local

  activate the default AAA authentication no

  AAA authorization exec default group Ganymede + authenticated if

  AAA authorization commands 1 default group Ganymede + authenticated if

  AAA authorization commands 15 default group Ganymede + authenticated if

  start-stop radius group AAA accounting dot1x default

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  AAA server RADIUS Dynamics-author

  AAA - the id of the joint session

  Switch #.

  Hello

  Add the level of privilege 15 control VTY line configuration.

   line vty 0 4 [..] privilege level 15 ! 

  Concerning

• PIX 501 Switch hardware Issue

  My PIX 501 switch stopped working or has failed. The PIX is 10 months old. This is the second time I've seen that happen. The first time I sent it fixed by repair out of warranty, but they couldn't fix it. They said it was a chip owner they could not get from Cisco.

  In any case, the unit has power. I am able to connect through the console and the WAN via SSH port. It is fully operational with the exception of the portion of the switch of the device.

  Has anyone seen this kind of problem before? I've never seen a switch or a hub spoil. It's the second PIX to go wrong in the same local area network installed. PCs and servers all continue networking function wise, so connected to another switch.

  Is that what I can do about this problem?

  Thank you

  Vince

  Vince,

  It depends on what type contract you have. You can open a TAC case and they will let you know the track.

  Let me know if you have any questions.

  Please mark this topic as resolved, so that others can benefit from.

  Kind regards