HP 450: Is that what this laptop contains chart AMD?

Similar Questions

• Satellite A500-1GH - what this laptop supports CPU load

  Hello everyone.

  Does anyone know which processor is supported for this laptop?
  I mean the exact models because I know what Intel I5 installed.

  Or maybe if you know the best processor that can be installed in this laptop.
  Are there documents for this laptop because I can not find the drivers in the toshiba site?

  Thank you.

  Hello

  The laptop supports the * Intel (R) Core i5-430 M * processor
  All details can be found on the page of Intel:
  http://www.Intel.com/consumer/products/processors/Corei5-specs.htm

  > Or maybe if you know the best processor that can be installed in this laptop.
  > Here are all the documents for this laptop because I can not find the drivers in the toshiba site?

  Usually the CPU upgrade not is not supported by Toshiba... but if you use the CPU of the same family of CPU (i5 - 520 M, i5 - 540 M), then you should have a good chance that the laptop would be compatible with this CPU... but I would not recommend these updates.

  Why?
  (1) you will not see any performance gain
  (2) you will lose the warranty

  Welcome them

• Would be - what this laptop be all good for first CS6 and AE?

  http://www.eBay.co.UK/ITM/Dell-Inspiron-17R-7720-laptop-3-4GHz-I7-1TB-8gb-2GB-650m-win-8-F 290893870076 FULL-HD-B-NEW-/? PT = UK_Computing_Laptops_EH & hash = item43baa033fc

  Or it will be very slow?

  Of course, I am aware that a laptop can not hope to equal out of office. But since I am not satisfied by the quality-price ratio of Nvidia cards high of current range, I decided to wait until the release of Maxwell before assembling a new desktop platform.

  In the meantime, I am planning to get a laptop cheap (for editing in his bed ). This one seems to offer decent record and good value at £700 / $1075. I would put a 7200 RPM Seagate Barracuda in there.

  All opinions, please?

  No. It's terribly slow IMO, being only a dual-core CPU, although with HT, but still low power for HD editing. SD card, it is acceptable, if you get an SSD as a boot disk and a second drive internal 7200 RPM. The standard drive 5400 RPM is good enough to make a backup of...? It is at least 15 times slower than a fast desktop computer. Is it painful? Depends on the pain tolerance...

  Well, you know what you pay for...

• Is that what this thread code safe?

  I've been seeing some information that makes me think that some servlet code that I have that I thought is thread-safe is not really. I have a servlet that takes a POST request and calls a stored procedure on a database to do a few inserts.
  

  public void doPost(HttpServletRequest request, HttpServletResponse response)
  {
    // Check validity of request then proceed.
    if (valid) { postPayment(request); }
  }
  
  synchronized private void postPayment(HttpServletRequest request)
  {
    /* Take some parameters from the request and call the stored procedure */
  }

  What I'm trying to do, is make sure 2 queries containing the same data trying to insert to the database at the same time. I did that or do I need a different approach?

  Meatwad says:
  Yes, I say an EJB.

  This isn't something that I can help you. There is here a forum EJB (Enterprise JavaBeans which can be a more appropriate place for this question.

  For the logical database are simply referring to the lock table/row?

  No, I mean no transactions. Google for something like java transaction database examples for more details. While you cannot end up using such things directly if the EJB ends up handling for you (and I really don't know how they do it), it is probably that you should know the basic principles.

  And can you point me in the right direction to find more information on how do this using the EJB?

  Google for the EJB tutorials and examples, for EJB transactions maybe, the link to the forum above.

• Is that what this text is important in my Code?

  Hey all,.

  I've been busy creating my website using Dreamweaver CS5 when I noticed something in my code and did not know what it meant.

  Well, then this is my query:

  I my meta description tag that will say something like this within my < head > tags < name meta = "Description" content = "a free tutorial on how do this...." ' / > This is perfect so far.

  However, when scrolling to the bottom of my page, almost every time I use the "ordered list" tool to add numbers in a new paragraph, copy the following code appears before: content p = 'a free tutorial on how do this... ". ">.

  That's the problem, almost every time I do a new 'ordered list' code is the same that my Meta Tag Description appear in the code.

  Is this a problem? This means that the search engines think that my site is spam and will not me place very?

  Thank you very much

  hunterguest1

  It is certainly not fair, DW should not add a content attribute to a

  Tag, never, let alone when you add a list.

  I would defintiely remove the content = "text here" of anything other than the original meta tag.

  After having cleaned out, I'd go delete the DW Cache file according to the instructions here: http://forums.adobe.com/thread/494811 and see if that isn't clear until the strange behavior.

  If it isn't, perhaps an uninstall, clean and reinstall is in order. You can get the tool here: http://www.adobe.com/support/contact/cscleanertool.html

  EDIT:

  is the invalid code. As it is not valid, the search engines would probably ignore it, but they "could" see it as an attempt to spam/cramming.

• HP Pavilion 15-ak085na 15.6 ": what video card is in this laptop?

  I saw this laptop but without going to the store, I see not what video card it, seems that he remained off the coast the details of the product. I searched HP and did a general search on the internet and no results return - well on HP they do, but it seems to refer to a very old item. The question I am interested in shows that it contains an i7 gen 6

  Hello

  The links below shows its specifications:

  http://WWW8.HP.com/IE/en/products/laptops/product-detail.html?OID=9192758#! tab = specifications

  There: Intel® HD Graphics 530 which goes hand in hand with the processor.

  Kind regards.

• Laptop HP 431 - deleted this partition containing the built-in operating system windows 7

  Dear Sir.

  Manufacturer had given integrated windows 7 operating system that start by pressing F11 at startup.

  At the time of the installation of external operating system through DVD, I unfortunately, by mistake I have deleted all the partition, I think, I deleted this partition containing BONES embedded in the hard drive.

  Now, I'm ready to install the operating system integrated by pressing F11, but it works not.

  Please give me a directive, how can I install integrated windows 7 operating system just like previous from by pressing F11 at startup.

  Kind regards

  Yogesh Sonar

  Y at - it a Windows Certicicate for authenticity on the bottom of your laptop or in the battery compartment that has the license of operating system twenty-five characters?

  Is there, then you can download an ISO install image and create an installer DVD or usb that will let you use this license key.

• CONFUSION ON WHAT IS THIS LAPTOP IN ORDER TO GET THE CORRECT CHIP SOUND DRIVER

  THE BACKGROUND OF THIS LAPTOP SAYSIT IS:

  PRODUCT: HP PAVILION dv 1000

  SN #[personal information]

  PN # PM054UA #ABA

  NOW, WHEN I PUT IN THE PN # IT SHOWS

  HP Pavilion dv1040us PC drivers

  IT IS POSSIBLE THAT IT WAS BUILT AT THE TIME OF THIS CHANGE.  FOR THE 1000 SOUND DRIVER DOES NOT CHANGE AND THERE IS NO SOUND BY HARMAN/KARDON BUILT-IN OR HEADPHONES.

  IT OF MAYBE A BURNED ON THE CHIP AND IF SO WHAT SOFTWARE CAN I USE TO TEST THIS SITUATION?

  I HAVE TRIED EVERYTHING I KNOW AND AM OPEN TO SUGGESTIONS.  I HAVE LUCK, USE THE DRIVERS FOR THE 1040?

  THANK SOMEONE FOR SUGGESTIONS.  J

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/us-en/document/c00247186

  Yes, it's a dv1040us and its product number is PM054UA #ABA. TIS must be very old machine because I can't find more than:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=433749

  For her, please try Conexant CX20468-31 AC97 Audio Driver:

  http://ftp.HP.com/pub/SoftPaq/sp28001-28500/sp28481.exe

  Kind regards.

• my window vista sp2 stop sending messages for the server http for e-mail hotmail from July 2010. What other opion should I now? I use window 8. my mother was the first owner of this laptop.

  My lap top is a window vista premium 6.0 sp2. so, as I believe that in July 2010 my connection email expired with the sp2 from window to the server with http hotmail .com I was trying out an important e-mail to a certain Department of the army and he was ejected back because of my direct window a stopover for hotmail http sites. So, what's my next step? This laptop that I use now for academic use belonging to my mother. I was'nt sure of what to click on in the troubleshooting list. Thks.

  Are what the hell you referring in Windows 8?

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.

  I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.

  The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."

  I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.

  The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.

  Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.

  I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.

  I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.

  Any suggestions are welcome.

  Thanks in advance!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.

  Forum TechNet Windows 7

  Hope this information helps.

• ThinkPad E420 - what is the type of this laptop SATA interface? Is this 2 SATA or SATA 3?

  Dear all,

  What is the type of interface SATA of ThinkPad E420? Is this 3 SATA or SATA 2?

  I noticed that this laptop hard drive transfer rate is 3 Gb/s, which means that it is a SATA 2 HARD drive, isn't it? It also means that the laptop SATA interface is SATA 2?

  I tried searching the support site and product from lenovo for this information, but I can't.

  Thanks in advance.

  Best regards

  Haris

  You're right, the E420 is SATA2.

  SATA3 is very rare in the laptops!

• I open a file and it says: "this file contains a link to a good that is missing."

  When I open my file muse a popup says: "this file contains a link to a good that is missing. You can find or relink missing assets using the active panel. "What does that mean?

  

  This means, Muse doen't find an image, which is placed in your document. Click the exclamation mark above the active panel, and it will show the missing assets. Via right click on the active input you can connect.

• "This project contains a sequence that could not be opened."

  Hey guys,.

  I am running Adobe Premiere Pro CC on a 2011 Macbook Pro and I've been working on a project. When I went to make the entire sequence, first froze and auto quit. When I went to reopen the project, I got the error:

  "This project contained a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence. »

  All versions of the files for automatic registration of the project gave the same error. I tried all the tips suggested as the deactivation and clean uninstallation, but nothing has changed.

  I'm quite desperate to understand what the problem is and what I can do.

  Taking the project to a different computer will work?

  Any suggestions?

  Thank you
  Steven

  Thanks Mark, but the advice did not work...

  BUT GUESS WHAT DID!

  Anyone with this problem please read this:

  http://valgameiro.com/what-to-do-when-you-get-a-preview-preset-codec-error-in-Adobe-Premie re-pro-cs6.

  If you have the patience to find the line of code, it works!

• Pavilion x 360-13-s102tu: how upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and what ram module supports this laptop?

  Hello, can someone help me to upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and also if anyone is familiar with how many slots there and what ram module supports this laptop?

  Hello

  Please use the part number and procedure on page 38 of the following guide:

  http://h10032.www1.HP.com/CTG/manual/c04825536.PDF

  (Note: same procedure for s1xx machines).

  Kind regards.

• What this means if I want to 'Run or save' a file that I am trying to download?

  What this means if I want to 'Run or save' a file that I am trying to download?

  Refers to run the file (it's probably an exe file or similar, which runs a program).  Record means to save the file, and you can click it to run it later.  It is always better to first save the file (in a place, you can find easily) and then he search for potential viruses first before running.  Make sure you know what you click on and download, because things will immediately infect your computer - often to the point of making it unusable.

  Steve