HP 4500 ENVY: ENVY 4500 is offline now

Similar Questions

• HP 4500 Envy: Envy 4500 is offline. How to get online. Windows 10.

  My urge to 4500 is offline.  In devices and printers-> HP Envy 4500... -> see what's printing-> printer, there is no other choice for putting it online is proposed in response to someone else.  I reinstalled printer, but it is always offline.

  Windows 10

  Thank you for your response.  I solved the problem somehow yesterday.  Someone has suggested that 10 a cumulative window updated.  I tried to do, but he seems to have been made recently.  The update site mentioned restart the computer for the update to take effect.  I rebooted and the problem disappeared. I really don't understand what went wrong or why it fixed itself, but I should have tried to restart the computer in the first place.

  Thank you-Lee

• C7280 is offline now

  My C7280 all-in-one is offline now and I don't know how it be printed. (FYI...  I'm wireless) it works fine for over 2 years until a few days ago.

  In addition, in Control Panel/hardware/printer port properties affecting sometimes on its own, will jump from 10.0.0.2 to 10.0.0.3 and I don't know why it changes and I don't know what Port setting is correct. (I think that 10.0.0.3 is correct, because in the past to be able to print, he had to be on 10.0.0.3) This problem is ongoing for a few months.

  I am a novice in computers and any help to get my printer to work wireless would be appreciated (the copier & fax work well).

  Thank you

  Bo

  Message edited by brew1070r on 09/24/2009 17:12

  You can set the IP address of the printer if you want to, however, it is best to set a static IP address in the router.

  Is there another adjustment with a right click that says 'use printer online '?  If it is available, it's what you really want to do here.

• HP ENVY 5640 e: HP ENVY 5640 wireless printer is offline now

  Ive just changed my router to an issued new ISP router, but now my printer is always offline and I cannot print any of my devices. Ive changed the static printer IP address in the settings of the router as that was mentioned in another post but its still offline. I had this problem with my last DESIRE that made me get rid of him to buy this new.

  IM no geek tech PC or anything also im really not stuck.

  Help, please!

  Hello

  Thank you for using the HP Forums. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• HP ENVY 5530: HP ENVY 5530 in offline mode

  Hello

  I had my HP ENVY 5530 for about 6 months, and since the beginning, whenever I print something, I would say that my printer is offline, so I have to restart the printer to print something. The printer works fine with my iPad and my S4 galaxy. In addition, my roommate has the same printer, and I have no problem with that impression. Any ideas why my printer hates my computer and wrote her off-line all the time. It really starts to get boring now.

  Thank you

  Hello

  I think that something to do with the IP address. Your printer can take any available within your network IP address after turning power. My printer has had similar problem, and after giving it a fix IP address, the problem has. Now, please, try:

  b press the WiFi, to register its IP address.

  (b) press settings, then press the bottom of the screen following

  (c) Adnaced touch and select manual IP settings

  (d) give a greater number (more than say 200 - keep the first 3 parts, replace the last part)

  It will be given to zero/reset and should be allowed from there

  Kind regards.

• HP Officejet 4500 remains offline

  HP Officejet 4500 is connected by USB to an iMac desktop using OS 10.6.8.  Printer sharing boxes have been checked with a Macbook Pro and a Mac Air running on our home network through a router from verizon wireless.  The impressions of the printer on the desktop but the laptop no longer recognize the printer.

  I have reset the modem several times, deleted and added the printer, re-installed the printer software, checked all connection cables, turned the printer power switch and restart all computers.  I printed the network configuration report and continues to read offline.  I tried in vain to get to manually enter IP address but can't find it.   What Miss me?  Any help would be appreciated.

  I activated the network wireless on my desk where the printer is hard wired, then went through the steps suggested - the printer now prints via laptops. Somewhere, somehow something that worked before worked. Thank you!

• HP Envy 5530 always offline

  I have problems with my printer again (2 months) HP Envy 5530. It is always appear as "offline". I cycled power on the printer and confirmed that it is connected to my wireless router. I checked for the latest downloads for your printer and am up to date. I confirmed that the printer is the default printer and can see printing via the control panel.

  I use a Windows 8.1 machine.

  Pages that I am trying to print are .pdf, but even just test HP page is found in the queue - not able to print because I can't get the printer on line

  Any advice for how to get printer back online?

  Hi @Tim-yellowcrocs

  I want to help you with your new printer Envy. Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer will not print: Windows 8.

  If the problem persists, let me know and we can go from there. Thanks for your time and your efforts. If you prefer to talk to a living person, we invite you to call HP.  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

• HP Envy 5640: Hp envy 5640 connected but now requires the password

  HP envy 5640 now requires the same password that is connected to the network. Tried to enter the password for the network; It did not work. Tried to reset the default value of such network suggested by forum; still does not work
  
  How to run again?

  HI @z281.

  Welcome to the Forums of HP's Support. It is strange that your printer requires the use of a password.

  So that I can better help you, I know what you are trying to do and when you are prompted for the password.

  In addition, you have iOS as your operating system. What version?

• Put Windows 7 on hp envy 17 Quad t - now USB no longer works!

  Hello

  I just got a HP Envy 17 Quad t, which came with Windows 8 on it.  I'm not a fan of him, so I installed Windows 7 instead.  After installation do not work many things, as expected, but I was able to install drivers windows 7 for them and got all the functions that have been lost so far, I have noticed to rework except my USB ports.  I tried two different drivers of these boards with no joy.  If someone has the right driver, so I can get USB up and running would be extremely appreciated!

  Thank you

  Max

  OK, was able to fix it myself after a few hours of really messing around.  (I'm not a computer guy, so this announcement to other experts).

  First of all, I went on the Intel site and updated the chipset driver, once again.  This fixed the problem of Bus SM.

  Second, I had to find the driver 5227 RTS for the card reader from RealTek PCIE, which I couldn't find on the site from RealTek but through multiple searches on Google using the portion of the id of material only up to '... in the end 5227."it's strange, because another driver RealTek PCIE card reader worked before Win7 updates, but that even the driver did NOT work thereafter.

  Then he got even more bizarre, to me at least.  The I need drivers were all there in Device Manager, no more yellow triangles, but I plugged my external hard drive on a USB port on the right side of my computer and nothing.  The way in which my office is set up I really only use this side.  Exasperated I tried the USB port on the left with another device.  Alto!  It took.  I had to plug my external hard drive in the left side first and could then unplug and install it on the right side and it worked.  No idea why it would need with one side first, then don't work both sides.  I waited a long time when I plugged it on the right side first before trying the left where he recognized immediately, then immediately recognized on the right after that.

• HP Envy 15 k-207ne: HP Envy 15 k-207ne now stuck

  After struggling through his departure upward... I met another problem.
  Before you restart it installed as '58 of 58 windows updates.

  and after reboot... its impasse on this screen for 30-40 minutes now:

  Someone still pls help

  

  OK try this

  Enter the BIOS by pressing F10

  Examine the startup configuration and put the HARD drive in the first place

  Looks like the boot order is Worng

• 1300 printer all-in-one: 1300 all-in-one is offline now

  I have been using a series 1300 printer all-in-one and had no problems until I changed the ink cartridges. Now the printer is offline and I could not get it online. There is no that print a test sheet any...

  I've updated the driver. Help!

  Is your printer PSC 1310 the page that is the alignment page printing, it must be loaded on the scanner and the hurry scan as described in p. 33 of the guide of the user here.

  

• Computer says Photosmart D110 is offline now

  I just bought a Photosmart D110 with my new Macbook pro earlier. Everything seemed to go well, the installation went well and it is installed on my computer. It has a signal and everything sends to my computer such as levels of ink etc. so get there connection. But when I try to print something it says the printer is offline. I can't understand. I hope that someone knows what's going on.

  OK, first do a software update from the Apple menu.  You should be at 10.6.8.

  Now, let's set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.0.100 a.199.  We will use 192.168.0.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Message: Shared spreadsheets cannot be changed when the number is offline now

  I just updated to IOS10. I can open all other spreadsheets in numbers (shared and non-shared) bar one when I get the above message.

  Locations - iCloud drive

  Hello babciax2,

  Thank you for using communities of Apple Support.

  I see that you are not abel to open a Numbers spreadsheet and get the error in quotes. This sounds like this document is defined for collaboration. Collaboration for numbers is explained in the following support article: collaboration for Pages, Numbers and Keynote

  This section describes what you see:
  

  Change when you are offline

  On Mac and iOS, you can only open a shared document when your device is connected to the Internet. If you are not connected, or if you switch to offline mode, all working, the application displays an alert asking if you want to work on a copy of the document offline.

  Best regards.

• OfficeJet 8610: HP Officejet 8610 is offline now

  I bought an Officejet 8610 5 months and it has worked very well - so far.  It is continually being disconnected and I questions online.  Most of the time, I need to powercycle the 8610 and it usually comes online.

  Connected wireless

  I put the IPv4.

  3 PC, iphone, iPad 2, all work very well on wireless environments

  HP Print & Scan doctor sees no problem

  I can start the ability to scan when printing is offline.

  Is this a hardware possible security problem?

  Hello
  
  Thank you for using the HP Forums.
  
  Can you try using a TCP/IP port?
  
  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.
  
  This video resource will show you how do:
  
  Create & use TCP IP port
  https://goo.GL/BBI671
  
  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
  
  Let us know if it works

• Keep the IP if the DHCP server is offline now

  We have a customer who wants to be able to manage the IP addresses of all devices with DHCP, but the devices are supposed to keep their IP forever after the DHCP server has been taken offline. Is this a behavior that we can support on a controller of NOR?

  If this is not a configurable behavior an alternative could be to have controlelr auto configure to the last known IP if no such is acquired... but the VI apply network settings doesn't seem to work if done on the controller itself. Is this correct?

  With NEITHER in Norway (thanks), I found a solution which allows us to implement the required behavior.

  The main problem for us once we need to override the default behavior for DHCP was the fact that the RT apply target Network Settings.vi does not work if it is set to target the same controller as it is running. So how to exchange between DHCP and fixed? Well, it turns out that the network settings are also stored in the file of ni - rt.ini. So here's what we do: when the controller starts, we check if it is running in DHCP mode. If this isn't the case, we change this in the file nor - rt.ini and the reset - to see if the DHCP server is operational. If the controller is running in DHCP, we check if the IP address is valid (i.e. outside the local range of link). If it isn't read us the last known IP address and write those set in the file nor - rt.ini and restart.

  An example of the sections of the INI file:

  For DHCP, the section of the nor - rt.ini will look like this:

  [TCP_Stack_Config]

  USE_DHCP = DNS_Address

  Gateway USE_DHCP =

  USE_DHCP = Ip_address

  USE_DHCP = Masque_sous

  For a static IP address:

  [TCP_Stack_Config]

  DNS_Address = 0.0.0.0

  Gateway = 10.0.18.1

  Ip_address = 10.0.18.13

  Masque_sous = 255.255.255.128

  It would be nicer than the network RT target apply Settings.vi would work for auto-reconfiguration, but it saved the day for us at least in this case.