HP 5610 all in one printer. Try to use with an older iPad

Similar Questions

• HP Officejet 5610 all-in-one printer have something that can be attacked by a virus?

  I have a "HP Officejet 5610 All in one printer" running Windows XP Home edition (32 bit).

  I tried to print a file that I had been sent and the printer began to print very slowly (one line / 5 seconds). At the end of the document, which had been printed was a load of rubbish! The next print was ok and printed at normal speed. BUT now, whenever I try to "Scan" a document using 'Microsoft Scanner and Camera Wizard', the 'Wizard' can take up to 1/2 hour to load when it is used for the scanner. If used for the camera the Assistant immediately.

  I downloaded and installed the latest HP drivers and still have the problem.

  Is there something inside the printer [ROM?] that can be attacked or is this a rare case to be an error of 'material' with a four year old unit. It is interesting to try to have it fixed or can I get a new camera? If so, which is recommended for a system of "consumption"? -Many thanks.

  Hi Semajleep,

  I would recommend printing HP and the Scan Doctor running. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the link below for more information on how to download, install and run this tool:

  http://goo.GL/MzwLH

  I would like to know if this helps or not.

• Officejet 5610 all-in-one printer has been installed and is not printing... Please help... :))

  Officejet 5610 all-in-one printer has recently been installed (I had printer for 4 years) and now does not print...

  Hello

  1. you remember to make changes to your computer?

  2. you receive error messages when you try to print?

  Try the steps in the following article: printer in Windows problems http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• HP 5610 all-in-one printer: printing problems from the internet

  my printer Hp 5610 all in one printer don't print properly on the internet, bold text is readable, any type is barely legible, and in some cases, unreadable. I have downloaded and run the hp print and scan doctor and followed touble shooting recommended changing usb ports and a different cable that has not solved the problem. The drivers have been updated and installed. The printer works well when you print files. I also changed ethernet cable which had no effect. I deleted and reinstalled the printer several times and still no results. I noticed this problem in the forums with different printers and systems, but I have seen no resolution for any of them. I'm open to suggestions to solve this problem.

  Hi @mikiev,

  Welcome to the HP Forums!

  I see that you experience printing problems when you print from the Internet, with your HP Officejet 5610 on Windows Vista. I'm happy to help you with this printing problem!

  A few questions for you, if you don't mind:

  • What is the name of the web browser that you use to print from?
  • What happens when you print from Notepad? You get the same quality print or better?

  In the meantime, I suggest go through this guide, Faded or dull in print colors. Also, I would suggest trying to print from another web browser. Such as: Firefoxor Google Chrome, etc.

  Thank you for posting!

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.

   

• Uninstall problems w/HP Officejet 5610 all-in - One Printer

  I have a Dell E510 desktop on which I've recently updated my printer to a printer wireless HP Photsmart 7520. I am running Windows 7 32-bit professional, an Intel Pentium 4 3.0 GHz CPU with 4 GB (usable 3.24) RAM. The new printer worked for about two weeks, but developed problems. The previous printer, a HP Officejet 5610 all-in-one, began to send me questions, so I removed it, or so I thought. The physical device is out of the system, however, I can not uninstall the software.  I tried to uninstall using the uninstall feature, nothing helps. I tried to use the feature to remove programs from the Control Panel, also to nothing does not. These tasks have been tempted both before and after the physical removal of the device.

  I keep getting error messages about the file being on a network that is not available. When I opened the printers and devices, the HP 5610 printer keeps appearing, no matter how many times I 'remove this device '. I believe that the two software are conflicting with each other. Does anyone have suggestions as to how I can remove the printer HP Officejet 5610 to my system?

  Thanks in advance for your suggestions.

  John C. Morgan

  Hello jmorgan884,

  I would like to offer a suggestion to uninstall the printer HP Officejet 5610 on your Windows 7 computer. I recently needed to tear a program on my computer and had problems as well, I was finally able to uninstall the software using Microsoft Fixit.

  This application is compatible with your operating system, free and very easy to use. I would like to know if using the Microsoft Fixit allows to remove the software.

  The problems that the programs cannot be installed or uninstalled

  Thanks for posting

• My HP Deskjet F380 All in One printer will not communicate with Vista system

  My HP Deskjet F380 All in One Printer worked correctly for always until 25/04/11 and then later it stopped working.  I swear to you that I have nothing else so he can stop working.  I have lost the disc that came with the printer.  When I bought this way while you, I simply plugged it and a pilot has been downloaed righ away and it worked (aka plug & play).  Any help would be greatly appreciated thanks!

  Hello

  I suggest try to download the latest drivers from the link below and check if this can help:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  It will be useful.

• How can I get my HP F380 all-in-one printer scanner, copier control with Vista

  F380 working with Windows xp in all modes, but now it just prints and gives me no control other aspects of the copier of analysis and control, because I loaded Windows Vista.

  Hello

  Follow the steps below and check if it helps.

  Method 1: I suggest you download the drivers from the website of HP support- Driver & Software Downloads - all-in-one printer, HP Deskjet F380.

  Method 2: Run the printer Troubleshooter and then check if that helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• HP 5610: I must throw a 5610 all-in-one printer/copier/fax. How to erase all documents that it stored?

  Memory can be removed or destroyed?

  Hey @Csc223,

  Welcome to the Forums of HP Support!

  I see you are trying to have an all-in-one Officejet 5610 printer. The printer has no permanent memory and does not store the work print or fax. It is useless to try to obliterate the memory of the printer.

  Please let me know if this answers your questions. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Set up a wireless HP all-in-one printer on your desktop with Windows XP Pro Version 5.1 SP3

  Recently, I uninstalled Solution Center HP from my desktop PC with Windows XP Pro Version 5.1 SP3.  The program worked very well and was connected wireless to my HP Photosmart all-in-One 309 g.

  Now, when I downloaded the latest software feature full HP and installed, it has completed the installation but could not connect to the wireless printer.  Setting up the wireless printer, he did 'see' the HP 309 g printer and I chose this but it gave me a dialog box saying that there was no installation configuration.  I also, tried the control panel "Add Hardware", but he couldn't 'find' the printer.  What should I do?

  You have an icon for the 309 g Photosmart in Start menu > printers and faxes?

  If so, right-click on it, select Properties, and click the Ports tab.
  By ensuring NOT to click inside the list, use the scroll bar on the right until you see the line highlighted and verified with the port used for this printer.  That said this line in the columns 'Port' and 'Description '?

  Note that you may need to click and drag on the small vertical line between 'Port' and 'Description' in the header line to make the column wide enough to read the entire entry.

  Click Cancel to exit the printer properties dialog box.

• Problem printing HP Officejet 5610 all in one printer

  Your Question: lately I got a printing problem documents and the printer 5610 has quite wierdly. Sometimes I see my printer name as the default name at other times that I can't find. When I try to add, I get a message Windows can't open add printer. Local printer spooler service is not running. Restart the spooler or the machine. Sometimes I run a malware software and restart the computer, the printer is connected automatically but sometimes I can't find the printer. Strangely, when it's not printing yet I can scan documents to the printer on my computer. Help, please.

  Sorry you are still having this problem. I see that you have an error in the spooler. This usually converts with a problem of Windows itself.

  Here is a video that can help you with the problem.

  http://www.YouTube.com/watch?v=MgHpoNZgbvQ

  Let me know if it helps.

• Officejet 5610 all-in-one printer

  Runs on Windows Vista,

  The printer now works well for the past 5 years, all of a sudden he wants to reinstall the printer and drivers almost after each reboot.

  I went to HP down load updates with no success.

  Thank you

  I disabled the HP Cue Discovery Service and I think that fixed my problem.  Thank you

• HP 5610 all-in-one printer not printing Mac OS 10.5.8

  I checked the connectivity with a test print which bypassed the drivers and the test print printed successfully. I also see that my Mac to recognize my printer because it does not appear when I go to print. And then, of course, I can see the name of the printer in the qeue, which shows the complete repleated jobs and yet nothing came out of the printer.

  Recently an upgrade did to my operating system, but I was able to print since then. This question arose after the loading of cartridges new yesterday morning. Thanks in advance for any ideas.

  Try to remove the printer from the list. Then run repair disk permissions (applications > utilities > disk utility) and add the printer.

• HP officejet 5610 All - in - One P: HP officejet 5610 all-in - One Printer

  My printer was working fine until we tried to install another printer.

  My printer has disappeared from my list and so I reinstalled the drivers and rebooted and still I can't find my printer on my pc.

  When I open the solution center it indicates that the HP Solution Center cannot run because your installation of the device is not complete. I proceed with the installation.

  Hello

  See the link below to fix the problem.

  http://support.HP.com/us-en/document/c02266743

• Printer all-in-one HP 5610: 5610 all-in-One prints blank page instead of print job

  When you send a print job, I get an empty page instead. I have:

  • Check the ink cartridges
  • Checked the connecction
  • Reinstalled the drivers
  • Don't have a full system reinstall to a date before the start of the problem

  None of the above works. I even went to a photo that I printed and tried to reprint - no luck.

  At the end of the roll...

  Thank you.

  Greg

  Hi Gregory_Mi,

  Thank you for your answer!

  I recommend to use our HP print and Scan Doctorand let me know what happens!

  If this does not resolve the problem, consider replacing ink cartridges refilled with genuine HP ink cartridges. This way, we will know if the problem is with the cartridges themselves.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Keep me posted!