HP 6700 premium inkjet, change default settings

Similar Questions

• How to change default settings of the browser to the installer?

  I want to roll Firefox like standard software to the company that I administer, but we have a lot of things that runs on IE plugins, IE it must therefore remain the default browser, and users simply press 'Yes' when Firefox is opened the first time and then complain when they can't open the internal links. Is there a way to turn it off to ask if there is a default browser? The cck Wizard, I checked, but it did not offer this possibility. Is there a registry key or file where I could change this option before opening?

  Hello Leskat, please see the following article on how to implement a lock for settings file: http://kb.mozillazine.org/Locking_preferences

  put the following line in the mozilla.cfg file to disable the application of the default browser:

  lockPref("browser.shell.checkDefaultBrowser", false);
  

• OfficeJet 6700: change the default settings of the printer

  I want to change 'Gray levels' to 'Off' to 'Black ink only' and 'Output quality' to 'Normal' to 'project '. I went to the Panel of control permanently change my default settings of the printer, but whenever I try to print, the parameters began to 'Off' and 'Normal '.

  Hey @arican55,

  I see you have some problems with the definition of default values on your PC of Windows 10 when printing to your Officejet 6700 Premium e-all-in-one printer. I can help you with that.

  To clear all default settings:

  1. If the printer is connected via USB cable to your PC, delete.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you can set the default values, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet 6700 Premium - how to set the default print quality of 'normal' of the "draft."

  Hello

  Thank you for your help.

  I have a printer/all-in-one Officejet 6700 Premium.

  Most of the documents that I print is for internal purposes, so "Draft" quality is sufficient.

  The default factory on the print quality setting is 'Normal '. I know how manually enter and restore the "draft", but I'd rather have the defaultproject, so I have to reset it manually each time.

  I could not find how to permanently fix the draft quality defect.

  Again, thank you for your help.

  George Mathis

  Thanks George,

  which is fully answering my question indeed

  Please follow the steps below to change the quality of the printer:

  1. Click the Start button.
  2. In the menu, click devices and printers.
  3. Right click on the HP Officejet 6700 icon.
  4. Click Printing Preferences.
  5. Enter the tab paper / quality .
  6. Select the project in the area of quality parameters.
  7. Click OK to save the settings.

  Now any future printing will be in draft quality.

  Kind regards

  Shlomi

• With the help of Windows to the top. -J' changed my settings on the page to backup several times, and now when I try to back up my computer it keeps default.

  TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
  I HAVE WINDOWS VISTA PREMIUM 64 BIT.
  I WOULD APPRECIATE YOUR RESPONSE

  Hello

  1. do you receive any error messages?
  2. what exactly happens when you try to backup data?
  3 have. what settings you changed?

  Please answer these questions. This will help us assist you better.

  Try to perform the clean boot.

  Refer; http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• OfficeJet 6700 Premium error 0 x 00000709 cannot set the default printer

  I bought my new HP Officejet 6700 Premium on February 1, 2013. I use a HP Pavilion dm4 laptop under Windows 7 Home Premium. The installation seems to give no problem. However I'm unable to set the default printer and have the error message 0 x 00000709. Excel, Adobe, Outlook does not allow me to print.

  I spoke to the HP printer Department February 1st and they sent me some software of diagnosis which I sent back. I called again on 6 February and was told my problem was always open and they were trying to reproduce the problem (it appears on the net without a patch work). It is now February 10, and I hope the good people of HP to recall with a solution soon. You try to run a small business with no printer is not ideal.

  Someone at - it else ecountered this problem, and you have a solution.

  I ran HP utility, installed uninstalled the driver etc etc etc.

  I seem to have fixed the problem by changing in the registry keys. If HP wants a donation to charity, I would be happy to provide it to them :-)

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• Satellite A210-17R: power management automatically changes to the default settings

  Hello

  I have a Satellite A210-17R with Win XP SP2. Works pretty well, except for the power management settings (they might call energy Mgmt., I don't know, cause Im using a German language version, so all the terms I use are translated from German).

  I am connected with my user name with administrator rights, then this isn't the common thing, where you cannot change the power mgmt based on your user status. I can actually change any settings (when disable hard drive and screen and so on, knowing what to do when the lid is closed), but somehow she maintains herself reset default settings. I tried to remove all the profiles of power except one, but still... keeps resetting. Ive tried to save the changes, eteinde, save the settings and the mashine completely but anyway even if not instantly (and I did not understand a pattern yet) it maintains the default reset.

  Its very annoying cause, I would leave on my laptop at night to download stuff, but I want to close the lid during the night and when I open the lid again in the morning, the day before on.

  Any suggestions?

  Hello

  As much as I know Satellite A210 isn't always supported WXP. What GST version you have installed on your A210?

  Until that Toshiba does not offer tested WXP tools and utilities, you can face more similar questions. In any case, you can try to use Windows XP Home edition power options and check the functionality. Maybe it will work well.

• Want 7645: Changing the default settings on HP 7520

  For reasons that I don't understand, after a long telephone help, user HP Support told me install the HP Photosmart 7520 driver for my printer HP Envy 7645.  It works fine EXCEPT that whenever I want to use to print several pages I have to change the settings so that I can print 2 Facer and on plain paper.  Can you give me instructions step by step to make these my 7645 default settings of the printer?  Thank you very much.   KJH

  Hi @khittelm,
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have question on how to set the properties of the default printer. I'll be happy to help you.

  Press start
  In the type of white box "devices and printers".
  Right-click on the printer
  Select the printer properties
  Change the setting you need.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Reorganize all the folders and subfolders manually, after the reboot, changes were not saved and return to the default settings

  I arranged recently manually all the folders and subfolders by list and alphabetical order, but when I turned my computer off and turn it back on, it goes back to the default settings.  I need to know what setting I need to change to avoid it too reset and also how to organize all the files and subfolders both (list and alphabetical order) because it is very long and fustrating to go into each folder and do it, can you help me with a quick and simple solution?

  * original title - arranged manually all the folders and subfolders by list and alphabetical order, but when I turned my computer off and turn it back on, it goes back to the default settings *.

  Hi Lilian13,

  You can read the following article and check if it helps:

  Organize, sort, or group your files

  http://Windows.Microsoft.com/en-us/Windows7/arrange-sort-or-group-your-files#section_1

  Hope this information is helpful

• Can I change the default settings such as the number of seconds that each picture is displayed in windows movie maker?

  Can I change the default settings such as the number of seconds that each picture is displayed in windows movie maker? Now she comes up a 7 seconds... I would like to change it to 6 seconds.

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker help & how-to and Forums are good sources of information:

  Windows Live Movie Maker that works in Vista and Windows 7
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3

  Official Support of responses - Movie Maker Forums site-
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=no

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Change the default settings on scanner

  How can I change the default settings of the scanner on my HP LaserJet M1212 MFP?

  I'm sorry you have a problem with the settings of the parser.

  You can go into your service menu and change the RESTORE DEFAULT settings.

• Changing the default settings for printing in Office Picture Manager

  Anyone know how to change the default setting for printing in Office Picture Manager?

  I have a user who clams that when they try photo printing settings in Office Picture Manager has been configured to print bac2 and paper 4 x 6.  Now when it prints, it must use the drop-down list boxes to tell it to print from bac2 and paper 4 x 6.
  I changed the default settings of the printer to print from the bac2 and use paper 4 x 6, but they must still use the drop-down list boxes in Picture Manager.
  Thank you!

  Although I maded the changes to the properties of the Windows printer I had to do that to solve the problem.

  To solve the problem:

  1. once in the print of the image window there is a link 'Options '.... "at the bottom right.

  2. once it's a click a print settings window that opens there. You will need to click on the link 'printer properties '.

  3. now the printer Document Properties window appears. Change of Source paper and media here.

  4. click on the OK button and now it's good to go.

• How can I change the locations of Windows Update to the default settings of Windows?

  Windows backup does not complete successfully, and I get the message "the system cannot find the specified file (0 x 80070002). Windows error procedures have not found the answer.  Solving the problems of files MS Fixit found that where Windows Update stores data has changed and that it should be repaired by changing places of WU to the default settings of Windows.  Please can someone explain how to do this?

  Hi Derek,.

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  You cannot perform backup and get error the system cannot find the specified file (0 x 80070002).

  The problem may occur if there is some disk errors hard or due to the interruption by third-party programs.

  What fixit have you tried?

  To check if the problem is due to hard drive errors or due to the interruption by third-party programs, I suggest you follow the steps:

  After each step, if the problem persists, go to the other.

  Method 1: Check the hard disk for errors

   

  See the site:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-in/Windows-Vista/check-your-hard-disk-for-errors

   

  Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

   

  Method 2: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

   

• Default folders: How can I change my default settings so that Windows Explorer, downloads, etc., all open to the folder I chose instead of "libraries.

  How can I change my default settings so that Windows Explorer, downloads, etc., all open to the folder I chose instead of "libraries.

  Here is an article on how to change this folder opens when you click on an icon in Windows Explorer:http://www.watchingthenet.com/how-to-change-windows-explorer-icon-to-open-a-diffierent-folder-in-windows-xp-and-vista.html.  I think this will do the trick. Otherwise, maybe the following can help (but I think that's the answer you're looking for).

  Here's how to change the default template for a folder:http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets thefolder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how to resetthe Windows Explorer folder view settings, disable Automatic folder Type discovery and increase theview of the folder cache to have Vista don't forget display settings, model of file type, size, or position of a specific window for when it was still closed to the location of specific path.  Keep in mind that it works, just a generic and holistic - it will not work for individual folders by folder.  That cannot be done in Vista.  But you can create shortcuts to the folders that you want and add to the desktop or right-click

  It does not work with the Sub record under, Open with,open in a new tab (Internet Explorer), etc... dialog windows of type through the goodFile menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free programhttp://autosizer.en.softonic.com/to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista:http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided:http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.