Access Backup DVD

Similar Questions

• Filed on a backup DVD

  I have Windows XP.  How to make a manual backup on a DVD?  Because I don't have MS One Care, I can't figure out how to back up my files.

  The default that NTBackup backup on floppy disk, it can not save on dvd

  The backup to a location of hd, then upgrade again fire on a backup dvd, or use a dedicated backup application which most can save at various locations.

• It allows me to access "backup and restore".

  My family vista premium is corrupt.  Is it possible that I can back up my system before you wipe the drive and install new operating systems?

  Hi Bbscout,

  1. what happens when you access backup and restore?

  2. you receive messages or error codes?

  Step 1:

  You try to run a SFC scan to find the corrupted system files and try to access the backup and restore.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  You can also try to perform a startup repair and check.

  Check out the link:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  If still not working, then you can back up important data to external drives or you can use third-party programs to perform the backup of the system

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Number of backup DVD 8 (13) has no data

  Hello

  My laptop HP Pavilion G61 crashed on the weekend. I used HP Recovery Manager and supported all the files on 13 DVDs. I have restored the laptop to the factory specifications. Started to reload the DVDs, number 1 to 7 went in no problem, but number 8 keeps having injected and then be prompted to load the number of DVD 8. Looks like that 8 DVD contains no data. How can I get around #8 and always load DVD 9 to 13?

  Thank you.

  Hello Jovette.

  I understand you have questions complete restoration of your data backup DVD. specifically it crashes on 8 DVD and never acknowledges, is that correct?

  If the PC does not recognize the disc, you're likely right, 8 disc has no data or is damaged (for example a bad DVD). There is no way to pass a certain DVD, unfortunately. However, if you insert a disc in the drive and then go to the computer and open the DVD from there, can view you the individual files you have backed up? If so you can copy them manually.

  I see another thing for you to try. The reader may have issues reading the disc because it is scratched or dirty. Even a small amount of oil from your fingers or a small scratch can lead to problems of reading the disc. Then, check the box of the drive. Is it scratched or dirty at all? If she has even the smallest scratch or damage that I suggest you take it to a local store that can shine the disc for you in the hope that it will allow the laptop to read.

• Backup DVD of Windows 8

  I downloaded and installed Windows 8 without selecting the option to backup DVDs. Do I really need DVD backup when re - install or change the computer? I could do a backup later? Can I install my purchased Windows 8 on other computers. and how much? Thank you.

  How to reinstall Windows 8

  You have two options:

  If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

  To do this, follow these steps:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

  Option 2:

  If you create an installation DVD or a USB bootable, you can use them to reinstall Windows. First, you will need to reinstall license qualification, then begin the upgrade to Windows 8. License of qualification means that you will need to reinstall Windows XP, Vista or Windows 7.

  Option 3:

  A workaround for this situation is to create a system image of Windows 8, just after you have upgraded. So if your drive plant, you can simply restore the image on a new hard drive or restore the image on the same drive, if you want to reinstall Windos 8.

  See the following for instructions on how to create an image of the installation process of Windows 8:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  (references Windows 7, but the same principles apply to Windows 8).

  ------------------------

  1 license, 1 computer.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  How to buy additional keys:

  Press the Windows key + X

  Click System

  Click on see details in the Windows Activation

  Click on the link: buy Windows to another computer

• Equium A60-155: can't access CD/DVD drive

  I own an Equium A60-155 with an extra 512MB memory installed. My problem is with the carpet * a DVD Super - multi Drive.

  When I insert a disc the busy light flashes for about 5 seconds, I hear a small amount of activity, but then it just stops and it stays on permanently. If I try to access the drive through windows, it seems to be empty!

  I had this problem before and it sets just once! I don't think that it is windows such that the drive has the same way (busy light always on, if the disc is in the drive) before even windows has started. My warranty ran out earlier so he sent set is not an option?

  Does anyone have any ideas, what is the problem?

  Hi Joe

  I put really know what can help, but you can try to remove the drive from the Device Manager list. Restart the device and check the functionality again. After you restart the new hardware (CD/DVD-ROM) unit will be recognized and installed correctly.

  If the problem persists with any type of media (original music CD and DVD) it can really be some malfunction of the equipment.

• Windows 7 backup dvd

  have a Pavilion S5-1050Z with win 7 home 64 which had the HD of. (WD Blue 500 GB)

  Bought new HD from Best BUY.  (Seagate 500 gb) - done with WD

  New drive is recognized by the system. Orderly restoration of the HP discs, but they don't themselves aren't yet.

  Had created a little backup discs back and forth and have 3 DVDs' on them .wim files.

  I have not had an ERD, but created one from another machine of windows 7 (computer toshiba laptop) which loads and I get to the point to enter the last disc of the backup of the image, but it says:

  ' Insert the media from the device and click OK to select the driver.

  I can't get the 3 disks to do anything.

  Must I restaurer restore with drives from the factory, first of all, then try to restore with these three discs then?

  I was hoping not to have to recharge every piece of software added to the system-

  am I missing something?

  Any ideas appreciated!

  Ed518, welcome to the forum.

  Yes, you will need to use the recovery discs before you add additional data.  The operating system is required.

  If your problem is solved, please click "accept as a Solution.

• Cannot access my DVD-CD in my computer

  Original title; DVD - Rw disc

  When I insert a cd it plays ok automatically. However if I open 'Computer' and try to access the information on the disk by clicking on the player it does not. Initially, I got a response. "Windows cannot access the specific device, a file, or a path. You can not have appropriate permission to access the item "." I ran the restore to an earlier date of restoration. Now, when I try to access the disc in the drive, I get the answer. "application not found".  If I right click on the drive I get the options and if I press 'Open' the tracks of the disc are displayed. I recently loaded software MP3 "Philips Songbird" on my system, but being not not happy with it I uninstalled it. I also uninstalled "itunes" & "icloud. Will be this cause any kind of problem? I have re-installed "itunes."  Can anyone help?  Faulkner W

  Hello

  ·         What operating system is installed on your computer?

  ·         Have you tried to play different CD/DVD?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race he difficulty of the link and check if the problem persists:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/314060

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Error: Access denied when trying to access CD/DVD drive

  Original title: can't access readers of cd on user accounts

  Whenever I try to use my readers of cd of my user accounts I get a message that says: "access denied." How can I fix?

  Hi HeyDad04,

  1. don't you make changes before the show?
  2. do you get error message on user accounts?
  3. have you shared you CD/DVD drive?

  We recommend that you provide us with more details on the issue, so that we can better help you. During this time, check if the problem persists in safe mode.
  a. start your computer and press the F8 key to display the advanced startup options.
  Hit and b. Select safe mode enter.
  c. check to see if you can access the CD/DVD drive.
  See start the computer in safe mode

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B

  I can't finish a DVD upward on my Windows Vista operating system.  This is due to an 0x8007001B error code.  I was unable to complete the fix to services.msu

  Hi mine,

  This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.

  Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.

  Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.

  I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).

  Good luck and best wishes!

• Unable to access backup after system restore.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  No available restore points that are old enough to recover the missing files.

  When you try to access recovery (d), you receive the following message:

  Protected by PC Angel

  Recovery partition

  Caveat!

  This area of your hard drive, etc.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  restore points don't effect your files, so cannot you recover a missing with her.

  Recovery (D :) also has no backup file to this subject, but is used to restore your computer to the way it was when it left the factory.

  teengeek.freehostingcloud.com

• Is it possible to access backups performed by a single copy of the Lr of another copy?

  After trying to help anewer a question asked by someone who is original Mac had apparently broken irreparably, I was wondering if it was possible to do what I asked above - backups of access by a single computer in unworking, that were said to be stored in the cloud, another copy of Lr on another machine?

  If I had two machines, I would try it myself, but I only have one office.

  If you download the catalog from the cloud file and place it on your computer, and then in Lightroom using file-> open catalog.

  Of course, you would need to recreate a link to the photos on your computer, otherwise you will not see the photos and you will not be able to do anything in this downloaded catalog.

• How to make a recovery disk for hp 13 stream backup DVDs

  I have my Stream 13 running nice and tidy and wish now to make a series of DVDs for a full recovery.

  Edit, I have new drives and an external Samsung DVD recorder

  Can you give me a piecemeal format. (Grandma hair .silver doh!)

  as a precaution, my disc breaks down, for some reason, couldI always use also built factory reset?

  Thank you in advance

  Kate

  You woud be better to create usb recovery media.

  The usb recovery media is durable and provides faster recovery rates that the DVD version is capable of. DVD media recovery takes 2 + hours to complete! Recovery using a USB stick recovery takes less than an hour to complete.

  An only scratch on the label side of a DVD of the recovery and the recovery dvd set is useless.

  To the following ADDRESS, there are video tutorials that show the details involved for the creation of a USB or DVD recovery media.

  http://support.HP.com/us-en/product/HP-stream-13-notebook-PC/7372147/model/7539081/document/c03481733/

  You are allowed to make a copy of the recovery media.  Choose well. You may need a 32 GB USB to create usb recovery media. The price for usb flashdrives fell down there where she is not much more the amount of DVD recordable media. Don't use Sandisk flashdrives. they are known to not be is not compatible with the recovery media creation utility.

• Cannot access the DVD player

  Currently, I am unable to use my DVD drive. This is the first time I had to use it as buy this HP laptop (HP Pavilion Notebook PC e051tx-15) the drive responds to press the button eject, but when a disc is inserted, that nothing comes under 'computer '. In Device Manager, there is an entry failed for HP DVDRAM GU70N (see below)

  

  I checked the driver download page but could not find something to fix this. Any help would be appreciated.

  -Aaron (x2jiggy)

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• needing a backup dvd

  Hello

  I have a portable pavalion with pre installed windows 8 os.

  I have a continuous problem with the software installed in the present. I got virus attacks to this until I'm able to take the recovery then now its very difficult for me to access my apps. I need an operating system recovery to overcome this problem. How could I get?

  Hello

  You have two options to click on the link given below to order the recovery disk or you can call the HP technical support to order the CD.

  Looking for recovery disks

  Numbers joining HP

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.