HP 6910P ssd compatibiltity

Similar Questions

• Help with installing 64-bit windows 7 on ssd step by step for HP Compaq 6910p?

  Could you help me how to install windows 7 64 bit on an ssd step by step for HP Compaq 6910p? All the drivers of your laptop?

  Thanks in advance.

  Hello

  Complete list of drivers is in the following link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3357378&lang=en&cc=us&TaskID=135&prodTypeId=321957&prodSeriesId=3357377

  The following guidelines may help:

  http://www.PCWorld.com/article/192930/how_to_upgrade_your_laptop_hard_drive_to_an_ssd.html

  Kind regards.

• driver SATA AHCI of 64 - bit - Compatible with HP 6910P or not?

  I have a HP 6910P 64-bit Windows 7 Professional.

  I've recently updated the primary drive to a HARD drive to 120 GB for a 128 GB SSD. However, the performance gain was minimal.

  Checking, I discovered that AHCI is not enabled and there is an option to do so in the BIOS (to date).

  The HP Web site lists a compatible 32-bit version (7.6.0.1011 REV: C) SATA AHCI driver for this model of laptop.

  However, despite quoting the same version (7.6.0.1011 REV: C) the 64-bit version does not list the laptop of HP 6910P under the list of compatible hardware.

  Is it simply an oversight or is there a valid reason, why the 32-bit version of the driver is compatible so that 64-bit is not?

  You are the very welcome, Drambo.

  I have provided the driver because I thought that you would just install the driver mode IDE restart and change SATA configuration native from disabled to "Enabled".

  Since you changed to "Enabled" SATA Native Mode and then reinstalled W7, you need do nothing else.

  How can you tell that the AHCI is enabled?

  Go to Device Manager and click on IDE ATA/ATAPI Controller section.

  You will find your controller SATA AHCI enumerated (Intel(r) ICH8M-E/M SATA AHCI Controller).

  If the BIOS has not been set to AHCI, the controller would have said, it was an ICH8 Serial ATA Controller, or words to that effect.

  Paul

• 6910p: STOP: 0x0000007e error

  I'm trying to install XP on an old portable 6910p.  Immediately after loading drivers, I get the dreaded BSOD:

  STOP: 0X0000007E (0XC0000005, 0XF74BE0BF, 0XF78DA208, 0XF78D9F08)

  PCI.sys - address F748E0BF base at F7487000, DateStamp 3b75d1ac

  Here are all the steps I took:

  different memory

  different (standard and SSD) HARD drive

  reset the bios

  bios update

  disabled the additional devices in the bios (bluetooth, wlan, etc.)

  charge sata drivers

  replace windows media

  Started from the external cd drive

  I don't see anything else to try... I'm out of ideas

  HP Compaq 6910p

  s/n: CND74525Z5

  It not.

  He had.

• How to change back to SSD HARD drive?

  My mcbook pro comes with the original 500 GB of HARD drive. When he ran with a problem, I went to an apple repair shop. Problem was in the charts, and he suggested the HARD drive to be replaced by a 120 GB SDD. So it has been replaced, but the guy on the left HARD drive as a storage device. Moment where DDI is left with small space and when I update to OS X El Capitan of OS Sierra, it had to be installed in the HARD disk drive. Could someone please give instructions to install the new OS to the SDS to lose all my data and the current configuration and it is also possible to install windows XP on the HARD drive and 10.  Either by the way, I got Windows 10 and XP shared with the SDS via parallels. Thank you

  I think this can be useful for you:

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• Latest MBPs are not autonomous RAM/SSD upgrade?

  Hello

  I recently heard that these latest Mbit/s do not allow users to upgrade RAM or SSD.

  What is the latest model of MBP which will allow upgrades?

  Would that be a model already abandoned?

  Thank you very much!

  No retina 13 inch MacBook Pro is extensible.

  http://www.Apple.com/shop/buy-Mac/MacBook-Pro?product=MD101LL/A & step = config

• Question of cloning for SSD upgrade on 12 Macbook Pro

  Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD.  For about a month and so far without problem.

  Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6).  I got a Crucial SSD MX300 to replace his HARD drive.  Crucial comes with (or recommend) Acronis software.  And a lot of the messages of the forum recommend Carbon Copy Clone.

  My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)?  This time, I'm upgrading HARD drive and I don't know if something is different.  At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.

  Thank you.

  Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.

• Cloning of SSD HD via active with Filevault disk utility

  Hi all

  I want to improve my HD to SSD.

  I intend on using disk utility for recovery mode to clone my HD to a Virgin SSD I bought.

  I must, however, Filevault enabled on my HD.

  It will be a problem when it comes to cloning the drive?

  Thank you

  Adam

  No, it shouldn't be a problem. It may be necessary first turn on FileVault and encrypt the SSD. But if there is no problem just turn off FileVault on the HARD drive.

• Sonnet Tempo SSD Pro - does not fit into my Mac Pro.

  I just bought a Sonnet Tempo SSD Pro Plus (the same, physically, like the Sonnet Tempo SSD Pro)

  I can't even came close it enter my Mac Pro end 2012. On the back of the bumps in the fan card, even with the fan cover pulled back.   This isn't a case to remove the lower lip, which obviously I do, I can't do it AT all, not even at an angle.

  I called Sonnet, but incredibly the tech said that it must adapt.

  It seems that I have only 2 choices: unscrew the fan and moving it more far forward of the mac (somehow) to cut about 1/2 "on the back of the Sonnet card.  The latter would obviously kill my warranty, and I don't even know if the bloody thing still works.

  To my amazement, I find nothing about it online.  It's like the Twilight Zone.

  Any ideas?  Someone knows has a video that shows a successful installation?

  Pls confirm what Mac you have.

  There is no end of 2012 Mac Pro, only mid 2012.

  There is a 2012 end MacBook Pro.

  Many retailers who sell SSDS have diagrams or installation videos. An example https://eshop.macsales.com/installvideos/macpro_2010/

• Editing a file to remove confidential data from a solid state drive (ssd)?

  I understand that El Capitan has removed the option "Secure Empty trash" because of hard drives (ssd) state how strong. So, I try to understand how I can work around it.

  Let's say I have a Pages or Word file with a list of names that should be kept confidential, and I want this file to the trash.

  What happens if I change the file to remove these names? Removing ssd data? Can I trash then the file as usual without worrying about confidential data remaining on the ssd?

  Or what should I do if I replaced the confidential names with something? For example, if I was John Doe on the list, what happens if I change to be John xyz? XYZ crash Doe on the ssd?

  No it doesn't, use FileVault to encrypt the contents of the disc.

• I have a mac with an SSD, it freezes after almost exactly 60 minutes

  I have a Mac with an SSD. It freezes after almost exactly 60 minutes and made for quite awhile - new version of iOS makes no difference

  What specific model Mac?

  Install a speed temperature and fan monitoring app like the following to see if overheating is the cause of the problem

  http://www.CrystalIDEA.com/Macs-fan-control

  • Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of ahttp://www.crystalidea.com/macs-fan-control start

• What is the PNY CS 1311 SSD is compatible with Mid 2010 Mac Book Pro?

  I would like to install this SSD on my Mac, is an SSD cheap I want to use until I finally upgrade my gear. . My laptop is mid-2010 MacBook Pro 13 inches.

  Is it compatible?

  For budget SSD

  I had success with scores of good benchmark using these SSD on a MacBook Pro.

  Trion 150 OCZ series

  Samsung Evo 850 series.

  on the 500 MB/sec in reading or writing.

  

• Best way to make my SSD works again with a single partition

  There are 2.5 years, I replaced the original on my computer with a SSD hard drive. Months after I installed the beta version of Yosemite, the latest operating system for Mac at the time. To do this, the system created a partition on my drive, in which he has installed the beta version of Yosemite.

  I have today on the same partition, I installed Yosemite, Sierra macOS running. In the other, I have all files, so I want to eliminate. However, when I try to do this by using the disk on my Mac utility, it is not possible; I get a message that says I can't delete the first volume of the disc. When I try to increase the size of the partition on which macOS Sierra operates, so reduced the size of the other, the system won't let me.

  I would like to know what is the best way to make my SSD works with only one partition.

  You cannot delete the last partition that was created, that not 1.

  You can clone the content from the 2nd to the 1st, then you can remove the 2nd.

• How to install a SSD in a Macbook pro mid-2010?

  Hey guys, I have a Macbook pro mid-2010, intel core i5 2.4 GHz and I bought last week a crucial MX300 - 2.5 in SSD and somehow I can not understand how to install it. I replaced it and when I start the computer, it is a question mark '? And after like 2 or 3 min it shuts it in itself.

  Can anyone help me pls how can I install it?

  Thanks in advance

  Best regards

  Mohamed Ndreko

  Replace the internal connecting cable (SATA)

• Looking to update Early 2011 Macbook Pro 13' to the SSD and need advice

  Hi - I'm looking to upgrade my Macbook in early 2011 Pro 13' with an SSD. Here are the specs of my current computer. Would be grateful if someone can offer an experience on the SSD can / should go with. Thanks in advance!

  
  

  Presentation of the material:

  Model name: MacBook Pro

  Model identifier: MacBookPro8, 1

  Processor name: Intel Core i7

  Processor speed: 2.7 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 4 MB

  Memory: 8 GB

  Boot ROM version: MBP81.0047.B2C

  Version of the SCM (System): 1.68f99

  Material UUID: 3565290B-8047-51EB-9D7E-82ED8091ADB6

  Motion sensor sudden:

  Status: enabled

  Chipset Intel 6 series:

  Vendor: Intel

  Product: The 6 Chipset series

  Link speed: 6 Gigabit

  Negotiated link speed: 3 Gigabit

  Physical interconnection: SATA

  Description: AHCI Version 1.30 taken in charge

  TOSHIBA MK5065GSXF:

  Capacity: 500,11 GB (500,107,862,016 bytes)

  Model: TOSHIBA MK5065GSXF

  Review: GP005B

  Native Command Queuing: Yes

  The queue depth: 32

  Removable media: no

  Removable drive: no

  BSD name: disk0

  Turnover: 5400

  Media type: rotation

  Partition map type: GPT (GUID Partition Table)

  S.M.A.R.T. status: verified

  Volumes:

  EFI:

  Capacity: 209,7 MB (209,715,200 bytes)

  BSD name: disk0s1

  Content: EFI

  Volume UUID: BDC1974F-6B8C-3DAE-9DB2-3AA3C17BF506

  disk0s2:

  Capacity: 499,25 GB (499,248,103,424 bytes)

  BSD name: disk0s2

  Content: Apple_CoreStorage

  HD recovery:

  Capacity: 650 MB (650,002,432 bytes)

  BSD name: disk0s3

  Content: Apple_Boot

  Volume UUID: 313A61DC-A35D-3021-96F5-1B24A04C0022

  See:

  https://eShop.MacSales.com/upgrades/MacBook-Pro-13-inch-early-2011-2.7-GHz/inter nal-discs

  They also provide videos for how to replace the HD with an SSD.

  You can also use more common 2 1/2 inch SSD, although some users have reported some probloms with the EVO Pro 850 Samsun