HP 8000 Elite PCI-Express Version

Similar Questions

• P6744: model of pci P6744D version

  I use P6744D from HP and my motherboard model:

  MS-7613 (Iona-GL8E)

  Here my questions:

  (1) what is the PCI Express version? Is 2.0 or 3.0?

  (2) I wanted to upgrade my graphics card for this model R939 8GD5 is possible?

  Thank you

  This certainly isn't PCIe 3.0, but a card PCIe 3.0 will work in your motherboard. You will certainly need to upgrade at least 500W POWER supply because it is a 6 + 8 PCIe power connector pins required.  My preference is at least a power supply of 700 w for a game system. The original power supply in your PC doesn't have the PCIe power connector. Your PC case will accommodate an ATX PSU.

  Information on your PC

  http://support.HP.com/SG-en/product/HP-Pavilion-P6000-desktop-PC-series/5035348/model/5082310/document/c02758913/

  Sheet on the ASUS video card you asked

  https://www.ASUS.com/graphics-cards/R9390DC28GD5/specifications/

  Measure the inside of the case, as described in the explanation in 2012 to ensure that the 11.3 "x 5.8" x 1.6 "inch video card will fit."

  The installed processor is a version of 2009 and the motherboard has no usb 3.0.

  There was a discussion related to your request for 2012.

  http://h30434.www3.HP.com/T5/desktop-hardware/upgrading-graphics-card-on-HP-Pavilion-p6520f/TD-p/1296863

• Pavilion Elite m9570sc pci express x 16 slot. Version n ° 1.0 or 1 a or?

  Product name: HP Pavilion Elite m9570sc desktop.

  Product number: NM943AA #UUW

  Windows Vista 64-bit

  Need to change the graphics card. However, HP did not mention the verse. The PCI Express x 16 card

  slot in their specification of motherboard. Need to know if the crack is a x 16 express 1.0 or 1 a.

  Greetings elgun23

  Hello:

  I don't think that anyone will be able to answer this question with a correct answer of 100%.

  You must look at the chipset and determine if these PCIe versions have been introduced.

  Based on the chipset (G33), I would say that your PCIe location is v1.1, because Intel had slots capable PCIe 2.0 until the X 38 chipset was introduced.

  You should find this article informative.

  http://en.Wikipedia.org/wiki/PCI_Express

  You'd probably be 100% sure to install a video card PCIe 2.0 on your computer subject to power supply constraints.

  Paul

• What version of the PCI Express x 16, it's my motherboard has

  I am running:

  Pavilion - p6320y

  -AMD Phenom II X 4 820

  -8 GB RAM

  -SATA HARD DRIVE 1 TB (7200 RPM)

  -Motherboard model: Violet6-GL8E

  Question: What version of the PCI Express x 16 is the slot on this motherboard: 1.x, 2.0 or 2.1?

  Can't get this information anywhere.

  Hello:

  I don't think that anyone will be able to give you a definitive answer.

  This article gives the date for the PCIe ranges various x versions.

  http://en.Wikipedia.org/wiki/PCI_Express

  Since you have a relatively new PC, I would say that it is certainly not less than PCIe 2.0 and probably PCie 2.1.

  I have a HP 8200 Elite CMT. I think that it is released at the beginning of this year, or very end of last year. 6570 PCIe 2.1, I use an AMD Radeon card in my PC.  It works very well.

  Paul

• the PCI Express 3.0 GT 640 work in my Pavilion Elite m9340f?

  Hello

  My 9500 GS started screaming and I need to replace. A GeForce GT 640 2 GB 128 - bit DDR3 PCI Express 3.0 x 16 recommended, but there PCI 3.0 and I want to know if it will work ok.

  I have temporarily replace the original map with a 210.

  Thank you

  Bill

  bigbillh wrote:
  

  Hello

  My 9500 GS started screaming and I need to replace. A GeForce GT 640 2 GB 128 - bit DDR3 PCI Express 3.0 x 16 recommended, but there PCI 3.0 and I want to know if it will work ok.

  I have temporarily replace the original map with a 210.

  Thank you

  Bill

  Hello

  Yes, it will be. PCI x 16 3.0 is backward compatible with the old x 16 versions.

• Compaq 8000 Elite COnvertible: compaq 8000 elite minitour convertible pci driver windows 7

  Hello, I had trouble finding the right drivers for my port of compaq 8000 elite series minitour convertible pci and pci simple communication controller, running windows 7 ultimate 64-bit...

  I found a link in a different thread, but the link does not work...

  Could someone help me please? It would be greatly appreciated☻

  Kind regards

  David

  Hello:

  You need these drivers for devices...

  Simple Comms:

  This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45411.exe

  Serial port:

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

• COMPAG HP dc5800 motherboard - what version of slots PCI Express-1 t - it have?

  I have a HP Compaq dc5800 p/n AK819AW #ABA.  I am thinking about adding a expansion card, but you should know which version of PCI Express-1 slots are on the motherboard.  They are the original or are they version 2.0?  Any help would be appreciated.  If you need more information on the computer please advise.

  Hello:

  Here is the link to the Intel chipset plug for the chipset of your PC.

  You will see the revision of PCI 1.1 listed.

  http://Ark.Intel.com/products/31917/Intel-82Q33-graphics-and-memory-controller

  I can tell you that I have personally installed a 2.1 PCIe card (Radeon HD 6570) in a CMT dc7800 who has express Q35 chip set and the specs intel for the Q35 also show a PCIe 1.1 revision.

  http://Ark.Intel.com/products/31918/Intel-82Q35-graphics-and-memory-controller

  I have the latest version of the BIOS installed on my dc7800.

• Slot PCI-EXPRESS is version 1.0 or a 2.0?

  Hello

  I have a 2010 HP HPE 360Z with the 3.2 GHZ AMD 6 core processor.    I upgraded my hard drive to a SSD drive to increase the speed of the software. Unfortuantly, the sata on the ALOE GL8E motherboard slot is only sata II where, as I want to speed III sata 6gbs.

  I think about adding a map PCIexpress Hyper Duo of 6 G sata (III) increase to sata III 6 GB data transfer spped.

  Y at - it slots 3 pci express on my phones a version that can run 6gbs (sata III)?

  Hi Paul,.

  Thanks for your input... I added the mini sock and 6Gbs card pci express and past the two hard disks to the new 6 map of Gbs.

  Unfortunately, the indications of cards were poorly written and now my bios are messy as new cards wizard did not finish...  The seller I bought the card iocrest said download the new drivers... is pretty difficult to do when your operationg system does not start.  management should do the download of the new drivers before you swich the original connections to the new Super express pci card sata HDD sata 6 G duo!

  .. I tried to reverse the cables of the drive hard to the card mother sata II links to return to my original, but windows configuration 7 will not start.

• Pavilion p6340f: version PCI Express Slot p6340f

  Hi all!  I'm upgrading graphic on the hp p6340f computer and need to know the version of the PCI-Express slot for the card that I get functions correctly.  Thanks for any help you can give me.

  By checking several motherboards using the Intel G43 Express chipset (same as the one in question), they are all are rated 16 PCI-E 2.0.  The standard 3.0 is more recent than the date of reference of the manufacturer of your PC.  Some PCI-E 3.0 might be OK in this motherboard but make sure that they are backward compatible.

• What version of the pci express x 16 graphics cards can handle office of a747c?

  What versions of pci Express x 16 graphics cards can handle desktop a747c?

  Your motherboard must support PCI Express v1.0, v1.1 and v2.0 cards without a problem. v2.1 and newer cards can be problematic.

• upgrade Alienware Aurora - version PCI Express graphics card

  Hi, I want to improve my Alienware Aurora with a new graphics card. I always use original equipment, an ATI Radeon HD 5700 Series (with GDDR5 1024), which runs with PCI Express 2.0 x 16. I had no problem with the card, but as I can't play Company of Heroes 2 with all the settings above, I want to get better. As I was looking for a new card, I wondered if my system supports only the PCI Express 2.0 version or also higher versions (like 2.1 or 3.0). Unfortunately, I couldn't find this information (my motherboard is an Alienware 0H869M). Maybe you can help me. If you have a recommendation of a good graphics card, I would be grateful that as well. Thank you.

  You can use the latest AMD Radeon cards that were designed for PCIe v3, they work only PCIe v2 mode, and generally it will not create any problems. I wouldn't say anything much higher than a 290 R9 or R9 x 280.

  You can also choose any NVIDIA card brand because they can also run on PCIe v2 and most people actually do this right now because they have not upgraded to a v3 PCIe system.

• HP Compaq 8100 Elite: Video unrecognized card in PCI-Express x 16 slot for security

  I disable the PCI Express connector in the computer - security - Slot Configuration on BIOS.

  I don't know that my card on Board did not work and now machine does not start, machine beeps 6 times (error video card).

  I can't access the bios.

  I try to reset the CMOS, remove the Green rider, remove CMOS battery, press the button within 10 seconds, press the power button (to remove rest of energy.

  But none of it works.

  Can someone help me?

  How can I reactivate PCI Express x 16?

  Hello:

  If your integrated graphics card does not work, and reset the CMOS does not work, you can try putting the PCI express x 16 video card, you now have in the location PCIe White x 4 slot (slot next to the slot PCIe x 16 black white video card) and see if you can get into the BIOS to change the PCI x 16 setting.  It might work in the x 4 slot.

  If it does not, you will need to install a video card PCI (the one that goes in one of the white PCI slots) and use it to get into the BIOS, so you can change the settings to enable the location of PCIe x 16.

  So see if you can find a cheap, used, video card PCI on eBay, and should allow you to have the video again.

  You should also make sure you have removed all the connections of the computer when you reset the CMOS (all cables, power supply, mouse, monitor, etc.).

• Speed of PCI Express x 1 slots on my HP Elite.

  
  

  PCIe 2.0 has the ability to increase the link speed up and down according to the actual speed of the attached device. http://www.10stripe.com/featured/quick/PCI-Express-2-0.php I use HWinfo32.exe and it is to show the fit to 5gbs chipset, but my periperal limited to 2.5gbs

  .

• HP 8000 Elite USFF: upgrade Windows 10 fails HP 8000 Elite USFF

  Got Windows Update to upgrade and decided to move to 10 Windows on a PC here in the office.  Attempted of the implemented installation of download, but it has failed, then downloaded the multimedia authoring tool and downloaded and burned to DVD a .iso for installation.  Returned to the place in the upgrade, but once again, he failed.  The message is "installing Windows 10 failed".  It is in a small white box.

  What are the options here? I tried the BIOS updates after reading that an older BIOS could be the source of the difficulties, but I can't make heads or tails of what exactly is the update of the BIOS it if there is one.  There are 5 downloads under the heading of the BIOS.

  I'm willing to do whatever I have to do to get there, but I don't know what I should try next.  I saved before allowing updates W10 and begin the process, so it's not a problem.  I can Flash the BIOS or something else if necessary, just need advice.

  Any help much appreciated

  I assume you are running Windows 7 Pro desktop 8000 Elite. If so, the latest version of the BIOS is rev 1.14 and can be recovered from http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4065880 & swItemId = vc_156854_1 & swEnvOid = 4060

  If you download and run the Softpaq BIOS, simply follow the instructions to install and reboot

• PCI Express Error - Qosmio G40 - 10Z

  Yesterday I turned on my laptop and I got a black screen with the message "PCI Express Error"
  I immediately started searching the Web that could be this error and I discovered that it is a known problem with some Toshiba laptops.

  http://www.nvidiadefect.com/Qosmio-PCI-Express-error-t383.html
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49108
  http://www.nvidiadefect.com/Toshiba-Qosmio-G40-12C-t1149.html

  Some of the many topics that I found about this error.

  I bought my laptop model from January 2009 as a demo in a Dutch shop called Qplaza http://www.qplaza.nl/

  Don't think I have any warranty next to security,) I received store (2 years), but there are a few things I don't understand.

  As I understand it, it's that there is even a lawsuite on this problem and that it indeed was a problem with chips from nvidia 8600. But then why won't Toshiba or Nvidia fix laptops with these problems?

  I read my laptop have to go to the special repair service to replace my motherboard and I have to pay for myself.
  And that's IF they can fix my laptop.

  I started searching the Internet which could be the cost of price, but the answers don't make me a very happy woman :-(

  Is there another way to solve this problem?
  And are there not places where you can buy a very appropriate motherboard for this laptop?

  Can someone help me please? My laptop worked perfectly and without any warning... poof... can not run more.

  Hello

  I can understand that you are not happy with the current situation. Nobody is happy if the computer starts to malfunction, but it of not always easy to tell which is the reason. For the exact diagnosis, you need professional tools and these tools available only to an authorized service provider.

  I get bored in your ad information is information about the operating system. Are you using the version preinstalled Windows and you have already collected your notebook back to factory settings? If not, you should do this to make sure that it s no software or driver that is causing the problem.

  If it still doesn't work you should get in touch with an authorized service provider and talk with the guys what they can do for you. I m, they can make you an offer for spare parts if you need them and a good price too of course. Just talk to the technicians is that as possible. ;)