HP 8530 Media Center with copying of Θcran Vista guard crashing blue, then it restarts

Similar Questions

• Configure the Media Center with TV combo tuner

  I'm trying to set up Media Center (Vista Home Premium) to recognize the analog part of my TV Wonder ATI 750USB tuner. Support page of Windows says ther is a fix. However, the services are not available and there is no indication when they will be available. Has anyone else experienced this problem and found a solution. ? If you have, I would be grateful if you could share it with me.

  My operating system is Vista Home Premium sp2.

  Thank you

  Hello

  ·        What happens when you try to configure Media Center with TV combo tuner? You receive an error message? If Yes, what is the exact error message?

  The fix for this issue is already installed Vista SP 1. Click on the link below. I suggest you to download the fix that is present in the article mentioned below and install it on the system and check.

  Windows Media Center does not correctly configure a combo TV tuner signals that supports ATSC and NTSC on a Windows Vista-based computer

  http://support.Microsoft.com/kb/929011

  Check if you are facing any of these symptoms that are mentioned in the article mentioned above and we do know.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Media Center will not be updated to allow the Blu Ray

  Hello

  I have an Acer laptop that supports Blu Ray disc, but when I go to play with Windows Media Center there is a pop up that says that "an essential element must be updated", but whenever I click "update", it tells me that my internet connection is not working it may not update. I checked and there is nothing wrong with my internet connection and library still refuses to update. Is there a way to force it to update? Or another program that will support the Blu Ray?
  Thank you
  Kerryn
  There is no native support in Windows for the Blu - Ray, including Media Center. You
  need a third-party Blu Ray player. What Blue Ray software supplied with your
  computer? It works as a standalone program?
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Download pirated Windows XP Media Center with the genuine key?

  Hi all

  First of all, I apologize if the thread, I created is in the wrong place (Technet forums), but I got enough good help from technet on a Windows 7 problem, that I had. I've recently updated to the Genuine Windows XP Media Center to a genuine Windows 7 Professional.

  I own a HP pavilion laptop came pre-loaded with XP MC (media center). Now, HP does not record with the laptop, instead, there is a recovery partition which can be transferred to DVD to create additional space on the HARD drive, I did. Unfortunately my DVD player no longer works, and I can not restore my XP to factory settings (new facility) because the HP restore software only reads from the DVD.

  This XP has become bloated over time, and I want to do a new installation.

  It is, I could download a pirated copy of the media center XP SP3 and use my real serial number and / or additional information to activate it?

  Thank you

  No, because your key is specific to an HP facility.
  Replace your DVD player or buy an external hard drive

• Installation window Media Center with Avermedia A850 DMB-TH/DVB-T

  Hi all

  I am located in Australia and I have a USB TV tuner which can be used for DVB - T or DMB - TH digital system. I tested it on the player of AverMedia TV tuner, which worked well and I can't all channels using an antenna from the wall outlet. However, it doesn't seem to work when I went to the Media Center window with the same exact configuration (taking wall antenna).

  I tried to use it on Windows Vista and 7, which gave me very different results.

  --------------------------

  Vista: When I click on "Setup TV signal" it recognizes the signal as "Antenna", but he was not able to scan any guide or service.

  --------------------------

  7: Interestingly, it recognizes the USB TV Tuner, but to halfway through the installer it says 'You are about to leave the media center window to start the installation process for Tuner AVerMedia digital (DMB - TH)' and the rest of the facility would be in Chinese, where he asks me which City Chinese I am etc. and cause recognized as a bad country and DMB - TH no channels are available.

  --------------------------

  Could I please get a setting for help to the top of the window Media Center?

  Initially, I thought it was a problem with the driver, but it seems not to be because she works for the Avermedia program.

  Thanks for your help!

  Hello

  Thank you for you answer.

  I have already contacted Avermedia and they got back to me with a solution. However, they notified the problem with the interface in Chinese was the software design of the library window.

  Also, I think that DMB - TH is just how Windows Media Center recognized as, because it is a hybrid TV tuner so when I click on the driver he recognizes as DMB-TH/DVB-T so its fine.

  In any case, he now works correctly. It's a hybrid tuner, they asked me to install a program that allows me to switch between DVB - T and DMB - TH. So far it works well :)

  Thanks for your help.

• I get an error "fix computer clock" when I try to use windows media center with netflix

  I downloaded the software you need to watch your netflix on Windows Media Center. Once I'm inside the Windows Media Center, I click on Netflix, my user name and password for netflix pops up, then I think that enter to go... I get an error message that says "Please update the computer clock you and or update your timezone. '. Both are already up to date, but I get this error message.

  Check your time zone. If all goes well, then it's a question with netflix. You can contact the support of netflix.

  Alternatively, you can try to reset your information newspaper: -.

  http://www.hack7mc.com/2009/11/resetting-Netflix-login-information-in-Windows-Media-Center.html

• Using WINDOWS MEDIA CENTER WITH YOUR KEYBOARD, BUT WAS so SLOW!

  I'm under full and 32-bit Windows Vista Edition without service pack, and it's so SLOW!

  Even he soon in MEDIA CENTER!

  Narrator read the buttons I pushed on and it WAS so SLOW!

  My father was so angry and it IS SLOW!

  Can you help me run SP2 on my computer?

  Hi again.  Question: what would these updates have been?  If you don't remember, open Windows Update, click on "see the installed updates" and more recently installed report with updates.

  As I already said (maybe bad), Windows Update not immediately offers you Service Pack 1.  There are quite a few Windows updates that must be installed before WU will offer you the service pack.
  There is also some (including some audio drivers Realtek) drivers that are known to cause problems with the installation of SP1; Therefore, WU do offer you the update until these drivers are updated.

  Here is an MS article explaining why (and bugs):
  http://support.Microsoft.com/kb/948343/en-us

  I would like to repeat that the three updates, I mentioned in my first post are prerequisites for SP1.  Theyneed to be installed first and in the order displayed.
  Again, check your Windows Update history for these three KB numbers.  If you don't see one or several of them installed, you can find with a quick Google search.  ;)

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Order a decoder DTA50 via Windows Media Center with an infrared transmitter/receiver Catherine-IR01

  Recently I had to get a DTA50 to continue to get the channels should I get, so I can watch TV through my WinTV TV tuner. The problem is that the decoder is not connected directly to the computer, so I can't control it like this. I have a Catherine-IR01 transceiver and an IR control cable, which is connected to the transceiver. Windows Media Center, says it can't detect the IR hardware. Can someone tell what I am doing wrong?

  I am unable to apply the change to the inf, I get an error saying that I can't make it writable. I have this play as an administrator, but can not modify or replace the .inf files.

  Edit: Zero I could get around a bit by saving the input.inf file in a separate folder by copying and replacing in the inf folder. However, there is no file irbus.inf to edit, neither is it a medctroc.inf file.
  Edit 2: OK, problem cleared up. It turns out that the problem was that it was misunderstanding my WinTV card double tuner as having two ties from boxes, and as such only found a single piece of hardware IR operation.

• "Tuner is not available" error message Windows Media Center with HD HomeRun Prime

  Running the tuner HD HomeRun Prime with Time-Warner tuning adapter.  Scan is not the tuner.  No problem with Device Manager.  For all drivers are current.  I have that once had access.  Then and only then, I had to access via HD HomeRun Prime and NOT of WMC.  No matter what I do, no tuners are found.  Adequate signal IS present.

  
  3. the similar issue was also addressed in the two threads below.
  http://thegreenbutton.com/forums/p/72329/376631.aspx
  http://thegreenbutton.com/forums/p/78588/388896.aspx
   
   
  If your computer has installed TV tuner hardware, follow these steps to resolve the error messages so Media Center can use the tuner driver. After each step,Open Media Center and try to view or to set up live TV. Continue following the steps until the error no longer appears and you can watch TV:
  1. If you use a cable of the card and the computer resumes from a standby or standby mode, wait at least 20 seconds before starting any software that uses the tuner, including Windows Media Center.
  2. restart the computer to Resync to Media Center driver:
  a. Click Start.
  b. click on the arrow in the toolbar and then click on restart.
  c. wait that Windows and all startup items load before you open Windows Media Center.
  3. If you have added a new tuner card, make sure that the tuner card is compatible with Windows 7 Premium or Ultimate. Search for certified for Windows 7 on the product packaging or consult the following website to check the compatibility:
  Microsoft support: Windows 7 Hardware Compatibility List (in English)
  4. change the Windows Media Center Receiver Service specific to a Local System account account name:
  a. click Start , and then type Administrative Tools in the start search box. Click on administrative tools in the search results.
  b. double-click on Services .
  c. scroll to the bottom of the list of Services and find Windows Media Center Receiver Service . You may need to expand the name column by dragging the right side of the column heading.
  d. right-click on Windows Media Center Receiver Service and then click Properties.
  e. click the Connection tab , and then select the Local System account .
  f. click apply and then click OK in the message Services.
  g. restart the computer.
  h. click OK again and restart the computer.

• Set up media center with comcast cable

  We have comcast for cable internet and digital high speed.  We do not have a cable box.  For internet - we have comcast cable connected to a motorola modem.  Directions - we have to connect the cable directly to the TV tuner on the computer card.  How to connect to a modem, then for internet service?
   
  I have a Dell Dimension E510 with Windows Media Center.  Thank you.
  
  

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Center is not on my Vista Ultimate

  I have Vista Ultimate, but Windows Media Center is not on my system. My copy of Vista is quite valid, but after going to all programs and the review of programs on my system, Windows Media Center is not here.  I also did a search for it with no luck.

  Any help would be really appreciated.
  Thank you.

  You have windows media player,

  You may have a version of windows N

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows/products/Windows-Media-Center/get-it

  These links have another link at the top so it can find the version of windows you have installed, use it before downloading.

• I can get 10 in my Hp Media Center m8020n PC windows have Vista

  I don't know what to do about 10 Windows for my HP Media Center m8020n. I've had this for about 8 years and he loves and does not wish to continue with it. Can I put Windows 10 here and update all software there need or do I have to buy a new PC

  Hello

  First of all I wouldn't do this on any machine that has more than 5 years. Secondly, please note: no free upgrade from Vista to Windows 10 you must buy Windows 10 license of Windows or 7/8 to get a free update of Windows 10. Money and time to devote to this would be painful.

  But if you want to try, please read the following article:

  http://www.intowindows.com/download-Windows-10-Upgrade-Advisor/

  Kind regards.

• IR questions - installation TV Media Center with Hauppauge 2250

  I recently installed a Hauppauge 2250 (http://www.hauppauge.com/site/products/data_hvr2250.html) to my new Dell Studio Slim with Vista 32.

  In the process of setting up the TV, trying to set up a connection my Set Top Box (Motorola MPC 3200) MCE configuration using a receiver/IR blaster to change the channel.  The process is going well until the programming of the controller ECM RC1534522/00 (http://www.remotecontrol.philips.com/index.cfm?id=1336) model supplied with the Hauppauge 2250 pack to work with the receiver IR/blaster.

  When the installation process of TV asks to see if I would like MCE to automatically find my controller settings or to manually program the channels, I tried the auto settings and it does not recognize my remote.  I then try the manual programming and it goes through the process without errors.

  I was then sent to the next step.  The channel decoder is on can be clearly seen in the preview area.  It asks me to use my keyboard or my MCE Remote control, enter a known string that I will recognize.  Using my remote MCE, I try to change the channel and there is no response from my Set Top Box.  I try to use the keyboard to enter a channel and there is no response from my Set Top Box.  The IR Blaster is however furiously blinking which means he is grateful that I am him asking to send a signal and sending it in turn one. My Set Top Box has no problem, receive orders from its own controller which makes me believe that it is not a problem of receiver Set Top Box.  If there is a problem with the programming of the MCE Remote control that is not detected during programming?

  I have tried many remedies listed on thegreenbutton.com forums and forums for the response from microsoft, including:
  (a) place the IR blaster on the IR on the Set Top Box receiver (and confirming that the location is correct with the help of a digital camera).
  (b) uninstall drivers current and update the Hauppauge drivers available in order to ensure that the software is up-to-date.
  (c) to ensure to choose the input parameters just for my remote when asked if he must enter to be pushed to change the channel (the Set Top Box does not need to repel the entry, nor has she a button on the remote control).

  There are all the other remedies I can try?  Are there any drivers or software that I can download to help with this problem?

  Hi Socaltrojangirl,

  Welcome to Microsoft Answers Forums.

  There could be a compatibility issue between the decoder and remote control device.

  I suggest that you contact the device manufacturer for compatibility.

  For more information on how to set up a TV signal, see the link below.

  http://windowshelp.Microsoft.com/Windows/en-us/help/589879da-b5a9-4E8F-b43c-c5eb99290e8d1033.mspx#EKD

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center TV Live TV & Recorded freezes & displays a blue screen.

  original title: WMC (WindowsMediaCenter) LiveTV & RecordedTVfreezes & GoesToBlueScreen

  How can this problem be simply resolved?

  It is perhaps an average 5 - 10 times a day.
  And sometimes a barrier cursor while typing.
  There are also defective TV recordings and routed.
  These records could be simply due to a reception antenna problem?

  Hello

  1 did you change on your computer?

  2. What is the rendering and the mouse model number?

  3. have you received any blue screen error?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest update you also the graphics drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: I suggest you to follow the link and check how to fix mistakes BlueScreen (STOP) that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  I also suggest you to follow the link and check.

  A problem of recording TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-recording-TV-on-your-computer