HP 8630 don't print only one copy!

Similar Questions

• Odd - Print/print only one copy is grayed out for a specific PSD, so I can't print it!

  I have worked on a few images for a competition, a print and then to print, but the print menu option is grayed out. How is that possible? What would cause a Photoshop to "decide", it can not print a picture? How can I get around it?

  Photoshop CC 2015, Windows 10, Alienware M14x (16 GB of ram, Intel i7 - 3rd Gen), Epson R3000.

  Discovered the answer 'somehow' it had been converted to 32-bit, and when returned, the print options were available.

• Printer defined now print only 1 copy

  The user came with this strange situation.
  
  A printer has been set to the PROD.
  
  Users who said about the old printer when you issue a print file allows it to print several copies. example, if you say 3 copy will be printed without any problems. Now with the new defined printer it prints only one copy.
  
  EBS 11.5.10.2
  
  Where I should look?

  Vicky1 wrote:
  The user came with this strange situation.

  A printer has been set to the PROD.

  Users who said about the old printer when you issue a print file allows it to print several copies. example, if you say 3 copy will be printed without any problems. Now with the new defined printer it prints only one copy.

  EBS 11.5.10.2

  Where I should look?

  Is the problem with a single report or all reports?

  You have the value of the option "simultaneous Copies: report" profile set to a value?

  How investigate the print issues and work towards its resolution? [297522.1 ID]

  Thank you
  Hussein

• I get an error message that "a copy of Firefox is already open. Only one copy of Firefox can be open at a time"and I have no open copy.

  I get an error message that "a copy of Firefox is already open. Only one copy of Firefox can be open at a time"and I have no open copy. How can I fix this problem? I like firefox because it runs many technical programs on the web that do not work with safari. I have FireFox installed on my PowerBook MacPro OS X 10.7.5 32.0.1 version. My activity monitor shows all activity of FireFox, so don't know not what he sees

  Check out these links;
  http://www.bing.com/search?q=Firefox%20not%20Close%20mac

• I get a dialog box with a copy of firefox is open and that only one copy of firefox can be opened simultaneously.

  I get a dialog box with the following: "a copy of firefox is open and that only one copy of firefox can be open at the same time."

  I don't see where firefox is open.

  How back in firefox so that I can read the links that are in my emails?

  Thank you.

  Sometimes when the FF closes, no not all stops correctly.
  On Windows, start the Task Manager (other systems may have
  different names and / or commands). Select the process.
  Look towards the bottom of the list for Firefox. Click right and then click end task.
  If this problem keeps coming, ask for help more.

• I tried to uninstall and reinstall Firefox several times. Whenever I try to open Firefox I get an error message saying "Close Firefox","a copy of Firefox is already open. Only one copy of Firefox can be open at a time. »

  I uninstall Firefox, and then reinstall Firefox, try to open Firefox and get an error message in a box indicating popup.

  "Closing of Firefox.

  "A copy of Firefox is already open. Only one copy of Firefox can be open at a time. »

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

• set the printer to print only one page always

  I have a HPlaserjet MFP 1005. I want to put to print only one page which isusually necessary. How do I?

  Hey @neelp,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see you try to set your Laserjet P1005 MFP always print one page only. This isn't an option through Windows PC or Apple, but there are two ways to work around this problem. The first would be to pay attention to what is being printed by activating the mode print preview before you print. The second solution would be to have only a sheet of paper in the printer at any time.

  If you have questions about the verification of print previews please let me know which operating system you use on your computer but also what program you use and I see if I can help you with that. If you are not sure what your operating system is you can click here to find. Even if you have any other questions please let me know.

  If this solves your problem then please let other users of the forum know clicking on accept as a Solution.

  I hope this helps and I hope you have a great weekend!

• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• Photosmart 7510 prints only one page when I copy 2 sided-multipage document

  I have a two-sided 4-page document. I have placer place in autonatic tray, select Copy 2 head to head 2 and press "Black." All pages are scanned, but only one page (2 sides), one out. I expect all 4 pages 2 faces out. What's wrong?

  Thank you.

  You are right. This printer does not the ADF duplex scan. It will print a copy of the 2 sides but the face page of the first page front and back on the face of the first page printed copy pages and page of the face of the second duplex page on the back of the first page printed from copy. What a waste. Well, I need now to decide if I want to keep this printer or send it back since it's the LPB brand.

• DeskJet 970Cxi: Deskjet970Cxi prints only one color

  My Deskjet 970Cxi prints only red in the color mode.  The cartridge is new and everything is cleaned.

  When the cover is open, the pointer on the cartridge holder stops at the position "OK to print cartridges".

  I tried reinstalling the driver, but I don't know that I managed to do that.  I got the idea that HP doesen't supports this printer more they told me to use the driver that is built into the software to my Windows 7.

  Any clue?

  The question is probably a very old #78 cartridge, even though it was new in the box.  You can verify that this is the cartridge by gently dabbing the printhead on a damp cloth.  A working cartridge will have a strong task of cyan, magenta and yellow.  Your cartridge will show only magenta.

  You can check the date of end of warranty for the cartridge as shown in the document here.  So that the 78 cartridge has not any expiry as such that they may not print in one color if stored for an extended period.  There are a few "home remedy" measures that could be taken to recover printing cyan and yellow, but the best solution would be to get a new cartridge (fees).  You can find the end of warranty date (two years from the date of production) in the bottom right of the back side of the packaging unopened.

  If you want to retrieve the cartridge, you can try one or more of the following:

  • Treatment of the cup of tea: get a glass of water and put in 1 "more or less very hot (but not boiling) water.   Deposit of the cartridge into the Cup and let soak for about 10 minutes.  Then, take the cartridge out and Pat the nozzles on a wet tissue.  Wipe the contacts with a clean or similar coffee filter not fluffy.  Install the cartridge in the printer and print a test page.  (You can print a hardware test page in accordance with method 4 of the document here.)
  • Sock of treatment: get an old sock that bothers you not ruin.  Put a wet cloth against the nozzles, then put the combination in the sock with the nozzle pointing in the toe.  Now go outdoors to an open area and quickly swing the autour sock in a large circle for a minute or two.  When done remove the cartrdige and gently pat dry the nozzles on a wet cloth, then put it in a printer and see if things have recovered.

  [Did I mention the best bet is to get a new cartridge?]  ]

• HP Color LaserJet CM1312 nfi no print only one page (document)

  Hi all.

  I'm in big trouble with Color LaserJet 1312 nfi (on 2 PC). Printer still print ONLY a single document (regardless of the number of pages) that I can't continue. I have to restart computer or the user to login and I print a new document. Scan OK.

  PC config:

  Windows 7 x 86

  connect via the USB port (but LAN made the same mistake)

  PCL6 driver

  I tried:

  reset to factory default

  the latest firmware update

  connect via LAN instead of USB

  Print via another PC (printer sharing)

  connect the printer to the other PC (USB, LAN)

  install the drivers of PCL5

  turn off Mopier mode (not available)

  Win XP - OK (printer so no problem)

  Any ideas?

  Thank you.

  Hello.

  Installation new version Universal Print Driver for Post Script - no change.

  I tried a thousand ways and WE work:

  install driver of the old school-HP Laser Jet III from Windows Update.

  I hope it helps someone...

• HP Officejet Pro K8600: Power light + resume light flashing after printing only one Page

  After trying to print a document of several page, the printer produced a page and then the power light and the resume light (page feed) Flash. I also tried to print multiple copies of a page, but that leads to the same result.

  I can get the lights extinguish by turning printer off then turn it back on. But it will always print that one front page the same lights begin to Flash. I did six times in a row just to print a six page document.

  I went through all the steps in troubleshooting HP software. Not like searching for cleaning print heads, re-seats cartridges, etc., fragments of paper. Nothing seems to work.

  @Bob_Headrick

  Thank you for your response. However, none of the suggestions could solve the problem. ALTHOUGH the light guide troubleshooting that you provided was close to the solution.

  I came across the solution by reading the PDF manual for the printer. On page 77, it describes the power led + resume light flashing. One of the causes for this using EXPIRES of CARTRIDGES of INK, CARTRIDGES RECHARGEES or NON HP CARTRIDGES.

  WARNING: It is important to note that if your printer is still under warranty, DO NOT DO THIS. HP notes in the manual using this substitution can void the warranty against damage caused by the use of faulty ink cartridges, obsolete or not allowed.

  SOLUTION:

  While the power light and button resume flashing, press and hold the power button and press the button repeat 3 times. This replaces the "apparent" internal error message to use the cartridges you have installed. It may also cause a print cartridge alignment page.

  MY OPINION:

  It is important to note the HP cautioned against it, it FIXED MY PROBLEM IMMEDIATELY! I know that the cartridges that I have installed are in agreement. Like many HP owners out there, I take advantage of sales and have stored on cartridges. I guess some may "expires" before you install it. In my view, the idea of "expiring" cartridges also somewhat falls into this column to "How can do us buy more ink?" What kind of market we create where it's cheaper to buy a new printer than to buy a new set of cartridges/toners? BUT it's a slippery slope... let's not go there.

• When I specify 3 copy prints only one

  When I indicate the number of copies and I put 3, my Photosmart HP 7520 print one.

  How to print last page first?

  Welcome to the Forums HP grinter,
  
  By your post, I see that you are unable to print several copies.
  I can help you with this issue today.

  In your printing application, select file, print, number of copies, select 2. Uncheck the Collate box.

  You can now change the number of copies. Collate should now stay disabled.

  Try to reprint the document of several pages.

  If she does not always print multiple pages then try the following steps to change the settings of the driver of the printer spooler.

  Click Start and then click Printers and faxes.
  Right-click on the icon for the printer for your printer driver, and then click printer properties.
  Click the Advanced tab.
  Click on print directly to the printer.
  Click on apply and OK.

  Try to print again.

  Good day.
  Thank you.

• Unable to print only one page in a multiple page / image tiff file using Windows Photo Gallery

  IT seems that for Windows Vista Photo Gallery is able to display multiple images in a TIFF file format when printing, but it does not select the image to be printed. Whenever I print a tiff image file two pages to print.  Since most of my photos are in TIFF format, and each contains two images one by one another at a reduced resolution and normal resolution I'm only interested in printing the first image and not the second.  I really don't want to convert all my photos in a different format.  Does anyone know if there is a setting to fix this?

  Hi KKosin

  Welcome to the Microsoft Vista answers Forum!

  I suggest measures are:

  1. try to print the image in MS Paint, steps to follow:

  i. Click Start, in the search box, type in the paint

  II. open the document to print

  III. click on print and check

  2. change the format of an image file and check if this problem is still happening. You can change the type of file to the JPEG/JPG format. Steps to follow:

  i. right click on the file type

  II. select Rename

  III. the extension .jpg or .jepg replace

  IV. and then try to print

  Here are some links for reference:

  Explore the features: Windows Photo Gallery

  http://www.Microsoft.com/Windows/Windows-Vista/features/photo-gallery.aspx

  Windows Photo Gallery: frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/d29d1fe4-EECD-4ae0-9efa-423098e5406b1033.mspx

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.