update the table of comments via the command

Similar Questions

• Update the command through Sub - VI

  I have two digital controls on the front of my application I want to put up-to-date during the execution of a Subvi (to be precise, several screws under run the same second sub - VI, and I want the second sub - VI to update the digital controls). I found a few ways to do this, but I don't know which is better:

  (1) a possibility to send references to the controls of the sub - VI, and that works fine except that it means that I need to wire references to several screws under and possible even more as I continue the development of the application.

  (2) another option is using a static reference of VI, getting the property of façade, get the array of controls [], and then determine what clues are the controls I want (which looks like a horrible hack)

  (3) I guess a last option is to use a global functional (or just an overall) to store a reference to the controls (which I have not really tried, but it seems like it should work...)

  Is there a commonly accepted method to achieve this?

  PS Digital controls actually get their functional values overall, so I need essentially just a way of saying to the face before reread the functional overall.

  Two things:

  (1) use a queue: place your controls on the front panel in a loop of reading their data to a queue (which allows the suspension pending data loop). Write to the queue within your 'second sub - VI".

  (2) assuming you use LV 8.x, try shared network variables and binding controls on the front panel for them. Write new data to the shared variable of in your 'second' sub - VI, that the controls on the front panel will update automatically... no code required. I used this method with success but limited so that there is only one 'Publisher' (writer) to any shared variable network, but which allows for multiple "Subscribers" (readers).

  These two work well because your orders of façade are updated when new data is available. No code turning continuously there are wheels "of the poll.

• Command update the esxi update 5.1 to 5.1 2 via SSH

  Could someone send me the command update ESXi 5.1 5.1U2? (assuming I already downloaded and copied the update to the host)

  I know it's something like esxcli the software profile install d [something, something, etc.], but I think that I've got the syntax.

  THX!

  VMware KB: Installation of patches on an ESXi host from the command-line 5.x

  1. Download the update and transfer it to any store of data that is available for the ESXi host
  2. Connect to the host via SSH ESXi
  3. Put the ESXi host in maintenance mode.

  # vim - cmd hostsvc/maintenance_mode_enter

  4. go to the directory on the data store where the patch file was transferred to and verify that the file exists:

  # cdvmfs/volumes/Datastore/DirectoryName
  # ls

  Verify that you can see the file that you downloaded. I guess that the file you downloaded is in zip format. In this case,.

  5 # software esxcli vib install d ' "/vmfs/volumes/Datastore/DirectoryName/PatchName.zip".

  More options are in VMware KB. Please see that as well.

  See you soon.

• How install Flash Player via the command line using sudo to install without being invited for the dialog "Preferences updated Flash Player"? Is there a really quiet option, no prompt?

  Since the administration guide, I execute the following commands on a remote host to install flash player. However, the command stalls waiting for "Update Flash Player Preferences" dialog box to decide. I would like to run this command on a remote host and have to install without any warning. Are the other arguments to the "'Adobe Flash Player install Manager" another that '-install ', something that is really quiet? "
  

  
  

  Silent installation of Flash Player (using Installer .app bundle)

  To silently install the Flash Player 11.3 or later on Mac, follow these steps:

  1 extract the bundle to install Adobe Flash Player (install Adobe Flash Player.app) of the. DMG file.

  2 open a terminal window and change to the directory where the .app file is saved.

  For example, if the .app file is saved to the desktop of the current user, type:

  CD ~/Desktop

  3. run the installation program contained in the .app file using the following command:

  sudo. / Install Adobe Flash Player.app/Contents/MacOS/Adobe Flash Player install Manager.

  install

  4. type the password to continue the installation.

  
  

  Thank you.

  Hello

  You experience this behavior because you use the installer online, download and install Flash Player silently in background, but requires also the user to provide the option to update.  Setup Online is not intended for the distribution of the company.  Distribute Flash Player within your organization, you will need Flash Player (usually free) licenses for distribution.  Apply for a license, go to Adobe Flash Player Distribution. Adobe and complete and submit the form.  After application, you will receive an email with a link to download installers for the distribution of the company.  This includes installers .app both .pkg you can use.  None of these prompts to update the options during installation in silent mode.

  I apologize for not noticing this before, however, I assume that you did not use the installer online since you were distributing Flash Player within your organization.

  --

  Maria

• How to get the version of Flash Player via the command line

  I have about 350 remote computers across the country I have to administer via SSH only, I'm looking for a way to the command line determine the version number of Flash Player on a computer.  Simple commands to find it?  Or via Reg Query?

  Thank you

  We provide a number of mechanisms for deployment and update of Flash Player in a managed environment.

  Check out the guide to the system administrator for more details:

  Adobe Flash Player for Flash Player Administration Guide | Adobe Developer Connection

• Run the command in the comments: dnscmd

  I use the command run in comments to run commands on a host windows below. The account that runs the command has permissions to run these commands.

  cmd.exe /c dnscmd xx.xx.xx.xx hostName1 some.dns.host /recorddelete has xx.xx.xx.xx/f

  cmd.exe /c dnscmd xx.xx.xx.xx /recorddelete some.dns.host hostname1 PTR/f

  (real info IP and host names are hidden to protect the innocent)

  Both run successfully (and should be) run interactively from a CMD prompt, I get the expected result and indicates a nslookup on the hostname '... cannot find < hostname >: field Non-existend' as expected. (img1 attached)

  If run via the command run in the comments, the first command runs (to delete the a record, however, while the second command seems to work, the PTR record is not deleted and nslookup on the hostname returns ' name: < hostname > '(attached img2))

  Thoughts?

  
  

  Here is an excerpt of the object 'command' treatment of an article on my blog: How to run a PERL Script from a vCenter Orchestrator Workflow

  
  // Prepare Command line and parameters to execute:
  
  cmd = scriptName + " " + scriptParams;
  
  System.debug("executing cmd: " + cmd);
  
  // Create and execute the command:
  
  var command = new Command(cmd);
  
  command.execute(true);
  
  // Display command results and output 
  
  var scriptResult = command.result;
  
  System.debug("Script Result: " + scriptResult);
  
  var scriptOutput = command.output;
  
  System.debug("Script Output: " + scriptOutput);
  

  As you can see from the code above, you'll want to look at the results and the exit of the execution of the object of your cmd. I hope that this release will contain some clues as to why your second command fails...

• [Solved] Possible to enroll the workstation via the command line (Linux)?

  Hi all:

  Under Linux Mint or Ubuntu, the ToolTip that should allow me to save the product key just won't display, making me unable to use the program. Normally, the system should ask me a root password after I click to enter, but nothing happens here, and I can't find a problem in any log file (by clicking on the option adds nothing in the newspaper at all). I try this on a new brand operating system installation and using the installer to update from the Web site.

  Is it possible that I could fix this, or as asking the question, save the product via the command line key instead?

  Thank you!

  Is it possible that I could fix this, or as asking the question, save the product via the command line key instead?

  In a Terminal, use the following command and use your real serial number instead of the fake one which is indicated.

  / usr/lib/VMware/bin/vmware-vmx-new-sn 1A2B3-C4D5E-6F7G8-H9I0J-1K2L3M

• The command update

  AGREEMENT ON AGRICULTURE
  
  How to command used to update the single Tabel A record in table B
  Please give me idea
  
  
  Thank you
  Pakistan

  Please make us a little more information. For starters, you try to perform this update in Oracle Forms or SQLPlus? If SQLPlus - ask your question in the forum SQL and PL/SQL.

  If forms - which version you are using (the version is always useful information). Are blocks of table A and B table in your form? That have you tried so far this task?

  Craig...

• Update the table on the dialog flow back task...

  Hi all
  
  I have a table. In a context menu of the table, a user uses a menu command to launch a workflow task merely as inline popup dialog box, which allows them to alter certain data associated with the selected line. It all works very well.
  
  What I'm trying to understand, that's how I trigger a refresh of partial page on the table once the workflow returned and the dialog box closes. I tried to call a support as target bean method of the "listener after" for the call activity of workflow that call the stubborn workflow, which calls AdfFacesContext.getCurrentInstance () .addPartialTarget (table), but which did not cause a refresh of the table. I waited a bit that would be the case.
  
  So, what event can I link at the right time in order to update the table?
  
  Thank you

  Hello

  When you open a workflow bounded in a small popup, then you use the earpiece back on the component that runs the pop-up window to refresh the table. On http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html, see example #69

  Frank

• Update the value of the column based on another value of the column to another table

  Hi all
  
  I have something very confused me and need your help.
  
  Having two tables A and B.
  
  Table A have 2 column (+ id + and desc1)
  
  Table B have column 2 also (+ transnum + and desc2)
  
  Now, I want to update the column desc2 of table B identical desc1 of table was where transnum of Table B same as the id of the table has.
  
  I use this SQL
  
  update of a2 set a2.desc2 = a1.desc1 of a2 on a2.transnum = a1.id inner join a1
  
  but this error occurs
  
  Error from line 5 in order:
  update of a2 set a2.desc2 = a1.desc1 of a2 on a2.transnum = a1.id inner join a1
  Error in the command line: 5 column: 35
  Error report:
  SQL error: ORA-00933: SQL not correctly completed command
  * 00933. 00000 - "command not properly ended SQL."
  * Question: *.
  
  * Action. *
  
  Hope someone can help me. TQ for help...

  SQL> create table a1 (id number(2),des varchar2(10));
  
  Table created.
  
  SQL> create table b1 (transnum number(2),des varchar2(10));
  
  Table created.
  
  SQL> insert into a1 values (1,'maran');
  
  1 row created.
  
  SQL> insert into b1 values (1,'ram');
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> update b1 set des=(select des from a1 where b1.transnum=a1.id);
  
  1 row updated.
  
  SQL> select * from b1;
  
    TRANSNUM DES
  ---------- ----------
           1 maran
  

• Problem with update of table (using the subquery to retrieve value)

  Hello
  I update a table based on the value of the subquery.
  Here's the update statement.
  
  UPDATING temp xm
  SET xm.col1 = (SELECT DISTINCT col1
  Of
  (SELECT col1, col2 COUNT (col2)
  FROM table2
  WHERE col1 = xm.col1
  AND col2 = xm.col2
  GROUP BY col1)
  where col2 in (select... in the table3)
  )
  WHERE xm.col5 = < value >
  AND xm.col6 = < value >
  
  When I run this statement I get following error.
  ORA-00904: "XM". "" Col1 ": invalid identifier.
  
  Can someone help me why I get this error?
  Why doesn't the main table alias in the subquery?
  
  Is it possible to avoid this / re - write the query in a different way?
  
  Thank you
  
  Published by: user552703 on November 2, 2009 20:42

  You can nest only 1 level deep (referring to the table to be updated).

  Have you looked at using the MERGE command? It is "easier" perform updates of this nature, assuming you are using a recent version of Oracle (9 or MORE).

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Pavilion 500-368na: update the BIOS, do not install via HP Support Assistant.

  I tried four times to install a BIOS update (SSID Roma family 2AF7;) Version 80.20Ap1) provided in the Support Wizard, the update only installs on every opportunity. I get no error message. Restart the computer, but the version remains (FRIEND 80,19 (2014-07-18)) previous BIOS installed.

  I tried to stop my antivirus program, but that did not help. I noticed that hangs the command screen with a blinking cursor, but no statement is visible, and then my computer restarts.

  Is it possible that the update is corrupted? Any advice on how I should proceed would be welcome.

  Yes, HP has indeed pulled the update.  Human system is in danger and you can continue to use your computer.  Everyone here is always on my list of contacts as events change.

• 10.11.4 update has failed because of the command line tools

  The 10.11.4 update fails with a message on the command line tools.

  I found this in system.log.

  Memento kernel [0]: sandbox: softwareupdated (329) deny system (1) - 682f fsctl

  181Mb Command Line Tool for Xcode 7.3 keeps reappearing in the section "updates" from the App Store, 10.11.4, as well as the global update apparently cannot continue.

  Normally, you should be able to select the updates separately (click on "More... »). If this does not work for some reason, you can download the 10.11.4 update by itself: download OS X El Capitan 10.11.4 updated

  (Combo version: Download OS X El Capitan 10.11.4 Combo Update)