set the printer to print only one page always

Similar Questions

• Photosmart 7510 prints only one page when I copy 2 sided-multipage document

  I have a two-sided 4-page document. I have placer place in autonatic tray, select Copy 2 head to head 2 and press "Black." All pages are scanned, but only one page (2 sides), one out. I expect all 4 pages 2 faces out. What's wrong?

  Thank you.

  You are right. This printer does not the ADF duplex scan. It will print a copy of the 2 sides but the face page of the first page front and back on the face of the first page printed copy pages and page of the face of the second duplex page on the back of the first page printed from copy. What a waste. Well, I need now to decide if I want to keep this printer or send it back since it's the LPB brand.

• HP Officejet Pro K8600: Power light + resume light flashing after printing only one Page

  After trying to print a document of several page, the printer produced a page and then the power light and the resume light (page feed) Flash. I also tried to print multiple copies of a page, but that leads to the same result.

  I can get the lights extinguish by turning printer off then turn it back on. But it will always print that one front page the same lights begin to Flash. I did six times in a row just to print a six page document.

  I went through all the steps in troubleshooting HP software. Not like searching for cleaning print heads, re-seats cartridges, etc., fragments of paper. Nothing seems to work.

  @Bob_Headrick

  Thank you for your response. However, none of the suggestions could solve the problem. ALTHOUGH the light guide troubleshooting that you provided was close to the solution.

  I came across the solution by reading the PDF manual for the printer. On page 77, it describes the power led + resume light flashing. One of the causes for this using EXPIRES of CARTRIDGES of INK, CARTRIDGES RECHARGEES or NON HP CARTRIDGES.

  WARNING: It is important to note that if your printer is still under warranty, DO NOT DO THIS. HP notes in the manual using this substitution can void the warranty against damage caused by the use of faulty ink cartridges, obsolete or not allowed.

  SOLUTION:

  While the power light and button resume flashing, press and hold the power button and press the button repeat 3 times. This replaces the "apparent" internal error message to use the cartridges you have installed. It may also cause a print cartridge alignment page.

  MY OPINION:

  It is important to note the HP cautioned against it, it FIXED MY PROBLEM IMMEDIATELY! I know that the cartridges that I have installed are in agreement. Like many HP owners out there, I take advantage of sales and have stored on cartridges. I guess some may "expires" before you install it. In my view, the idea of "expiring" cartridges also somewhat falls into this column to "How can do us buy more ink?" What kind of market we create where it's cheaper to buy a new printer than to buy a new set of cartridges/toners? BUT it's a slippery slope... let's not go there.

• HP Color LaserJet CM1312 nfi no print only one page (document)

  Hi all.

  I'm in big trouble with Color LaserJet 1312 nfi (on 2 PC). Printer still print ONLY a single document (regardless of the number of pages) that I can't continue. I have to restart computer or the user to login and I print a new document. Scan OK.

  PC config:

  Windows 7 x 86

  connect via the USB port (but LAN made the same mistake)

  PCL6 driver

  I tried:

  reset to factory default

  the latest firmware update

  connect via LAN instead of USB

  Print via another PC (printer sharing)

  connect the printer to the other PC (USB, LAN)

  install the drivers of PCL5

  turn off Mopier mode (not available)

  Win XP - OK (printer so no problem)

  Any ideas?

  Thank you.

  Hello.

  Installation new version Universal Print Driver for Post Script - no change.

  I tried a thousand ways and WE work:

  install driver of the old school-HP Laser Jet III from Windows Update.

  I hope it helps someone...

• Unable to print only one page in a multiple page / image tiff file using Windows Photo Gallery

  IT seems that for Windows Vista Photo Gallery is able to display multiple images in a TIFF file format when printing, but it does not select the image to be printed. Whenever I print a tiff image file two pages to print.  Since most of my photos are in TIFF format, and each contains two images one by one another at a reduced resolution and normal resolution I'm only interested in printing the first image and not the second.  I really don't want to convert all my photos in a different format.  Does anyone know if there is a setting to fix this?

  Hi KKosin

  Welcome to the Microsoft Vista answers Forum!

  I suggest measures are:

  1. try to print the image in MS Paint, steps to follow:

  i. Click Start, in the search box, type in the paint

  II. open the document to print

  III. click on print and check

  2. change the format of an image file and check if this problem is still happening. You can change the type of file to the JPEG/JPG format. Steps to follow:

  i. right click on the file type

  II. select Rename

  III. the extension .jpg or .jepg replace

  IV. and then try to print

  Here are some links for reference:

  Explore the features: Windows Photo Gallery

  http://www.Microsoft.com/Windows/Windows-Vista/features/photo-gallery.aspx

  Windows Photo Gallery: frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/d29d1fe4-EECD-4ae0-9efa-423098e5406b1033.mspx

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP LaserJet Pro 400 M401dne print only one page (document)

  
  

  Solved.
  Next to status of control over the PCL6 drivers (probably wants new firmware).

  Makes office 2013 - Win 7 x 86 and x 64, x 86 Win8 (I test on a clean install of Win - after install Office 2013's back problem)

  Fu * k

• ENVY 5530 e-all-in-One Series: My ENVY 5530 e-all-in-one prints only two pages of a multi-page document.

  My newly installed (Jan 2015) ENVY 5530 e-all-in-one prints only two pages of a document with several pages of my HP desk top 500-123ea, windows 8.1. Message on PC "Unable to print document", it's even on Double or single sided printing.  A ran Scan doctor, OK; reloaded software and Firmware from the Hp site. He spent hours and hours of reading the elements of list of support HP; Impossible to talk online with HP. very in angry and frustrated. This HP product seems not as "fit for purpose". I will give HP Feedback after this announcement and rate accordingly. I beleve others have similar experience of this problem. HP is aware?  Is anyone out there that can help?

  We gladly invite you.

  A Roll-up update is already available since December, although it seems that the description is not being updated accordingly.

  Follow the section "get the hotfix rollup for Windows 8.1"in my previous link, which can be obtained by installing the package or by using Windows Update, this is the update that the articale refers... ".

  Shlomi

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the printer in VBscript

  I have a folder that contains 20 pdf files, I want to print only 2nd page with 2 copies of all files PDF 20.

  I have VBscript

  ---------

  TargetFolder = "path of file."
  Set objShell = CreateObject
  Set objFolder = objShell.Namespace (TargetFolder)
  Set colItems = objFolder.Items
  For each objItem in colItems
  objItem.InvokeVerbEx ("Print")
  Next

  --------------------------------------------
  here all the files are all print page but how put in 2nd page with 2 copies in 20 pdf files

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• No printer in the print, only icon in the "Add printer" Wizard dialog box

  Windows XP Professional - Version 2002 - Service Pack 3

  What would cause the print dialog box does not show printer, only the icon of the Add Printer Wizard?

  This occurs in only one (Eclipse) application on the PC.

  There are 20 printers in printers and faxes.

  I can not completely through the Add Printer Wizard and it will be case add a printer and/or set as default, if specified printer.

  However, the print dialog box displays always no printer.

  7 developers here, 2 have Windows XP, with the rest on Windows 7.

  Only two XP machines have this problem with this particular application.

  Windows 7 machines have the same version of the same application, but the print dialog box normally works for them.

  If I understand you correctly, everything works fine except the print in a particular application dialog box.  If this is the case, then maybe you should ask the promoters of this request for help/comment.

  Otherwise, given that the problem seems to be in the interaction between a particular application and a few Windows print API (probably the Print spooler API), you will be much more likely to find competent people to MSDN or TechNet.  Unfortunately, given that XP is on its way, it has only a single forum TechNet for XP but there is a Vista printing forum who may be of assistance.

  The Windows printing team blog seems to have been inactive for a while.

• Can not set the print properties

  Just loaded FireFox 4.0.1
  When I click on
  file
  print
  and the print window opens if I click
  Properties to define the quality or black etc. only I get
  an error box that says:
  Error
  Prop Res DLL not loaded

  I tried exactly the same thing using Windows internet explore and the Word for windows, and these all are working
  perfectly. I can click Properties in the print window and
  the value of what I want on my printer.

  I rebooted and no help.

  I'm about to go back to the previous version of Firefox
  Since I print a lot of websites and I often
  you want to set the print mode project to save time and ink.

  Can you offer any suggestions other than coming back
  the earlier version?
  Thank you!
  KyDan
  Louisville KY

  This seems to be a problem for a long time with the Lexmark printers who has just started to happen in Firefox 4.

  An example
  
  http://forums.techarena.in/MS-Office-support/596409.htm

  This Google search.

  Check out this thread for support for a solution that has worked in 2006 for a similar problem with another Lexmark printer. I hope that something like this will work for you.

• When I give a print, only blank page comes my printer is HP Laser Jet P1102

  When I give a print, only blank page comes my printer is HP Laser Jet P1102

  Hi aremps,

  1 did you changes to the computer before the show?
  2. what operating system you have installed in the computer?

  This problem can occur because the print settings cartridge. Check your ink cartridges to see if you are out of ink. Refer to the printer manual for settings and troubleshooting.

  Please select the operating system and follow the instructions to solve the problem:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&DLC=en&LC=en

  Please report if you are still having the problem. I will be happy to provide you with additional options.

• HP LASER JET 1020 not print even one Page of Test.

  HP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).

  can someone help to solve the problem?
  Thank you

  HP LASER JET 1020 not print even one Page of Test. Driver is correctly installed and the printer is detected. Operating system is Windows 7 (32 bit).

  can someone help to solve the problem?

  Thank you

  (1) U have tried to reinstall the printer drivers? Try to clean the print cartridge using the hp software installed...
  (2) if the problem persists, reinstall the cartiridges...
  (3) make surré cartiridges meet ink, the wires are properly pluged in electricity, as well as cable usb to computer, usb messages work
  (4) try to refresh service printer spoiler...
  Run this file bat using to run as administrator

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  (5) use HP Print and Scan Doctor (find and fix common problems printer using HP for Windows diagnostic tools)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02073861

  If necessary
  Contact hp help and support
  http://WWW8.HP.com/us/en/support.html

  Contact hp support forum
  http://WWW8.HP.com/us/en/supportforums.html

• Firefox print only 4 pages of a .htm file, while internet Explorer prints all 9 pages

  Firefox print only 4 pages of a .htm file, while internet Explorer prints all 9 pages

  (it's a Treasury Direct 1099 handset file in htm format

  • https://developer.Mozilla.org/en/CSS/page-break-before
  • https://developer.Mozilla.org/en/CSS/page-break-inside
  • https://developer.Mozilla.org/en/CSS/page-break-after

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes