HP Officejet Pro K8600: Power light + resume light flashing after printing only one Page

Similar Questions

• HP LaserJet Pro 400 M401dne print only one page (document)

  
  

  Solved.
  Next to status of control over the PCL6 drivers (probably wants new firmware).

  Makes office 2013 - Win 7 x 86 and x 64, x 86 Win8 (I test on a clean install of Win - after install Office 2013's back problem)

  Fu * k

• HP Officejet Pro K8600dn: officejet pro k8600dn power, which takes up and cover open lights up on

  My Officejet Pro K8600dn shows the lights of the next panel: Power On, which resumes and cover open. No mention of this flaw in the user manual. Cannot print at all. Attempted to trigger the switch cover, but to no avail.

  Dear Rock_Doc,

  Please follow the steps in this document depends on the lights that show your all-in-one:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-K8600-Printer-series/3434445/model/3434446/document/c01289436/

  I hope you find it useful.
  
  Greetings.
  
  * I am not an employee of HP, my work is voluntary.
  
  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• HP Officejet Pro K8600: HP Officejet Pro K8600 - is no longer connected, print - driver lost?

  DISCLAIMER: I understand that it is a large display. Please, please read it carefully before suggesting the diagnosis. While I'm not an advanced programmer, I am very computer and am usually able to solve minor to somewhat advanced questions. However, I've exhausted my knowledge and my skills to no vail here...

  CLARIFICATION:

  I use a processor 3 GHz Intel i7, 12 GB of RAM on Windows 7 Pro 64-bit (Service Pack 1) OS. My printer is a HP Officejet Pro K8600 - it is NOT an all-in-one printer. This is a printer large format, single tray. I have Avast Home Free edition runs on the PC as well as SBSD and widows firewall ACTIVE. In my Panel "Devices and printers", it also shows that I have the following 'printers' installed: Adobe PDF (copy1), Fax, Microsoft XPS Document Writer, PrinterShare, Quickbooks PDF Converter, QuickBooks PDF Converter 3.0 and send to OneNote 2010. Windows Update has been on 'Manual' which allows me to choose which updates to install and when. However, at some point during this troubleshooting - I for 'auto' changed, so I don't think there are a few updates to Windows that has been installed automatically.

  Just for additional notation, I also use a double 4 operated by two NVIDIA graphics cards monitor display monitor. Not that it should be any problem because I use this configuration for some time. However, I was surprised to find that some software does NOT support more than two monitors. Very strange.

  SCENARIO:

  This printer is about 6 years old. It has been a great printer and I rarely had problems with it apart from maintaining normal jet ink and minor errors. I have been successfully connected to the current computer at least 2 years. Once again, never problems. The printer is connected directly to the computer using a USB standard cord - less than 12 feet long. Printer is also shared on the home network and I can usually print using my laptop in the network without any problems. Printer is on a shelf on the wall above my workstation.

  QUESTION:

  PART A: Two days ago, I was about to print a simple, small Photoshop CS3 PDF image. It is a daily task - size of the document was less than 11MB. The printer has not initialized as usual - I noticed that the light flickered.  But the printer is trying to print (print head not move not, does not feeding paper, no noises). So I tried to follow the standard troubleshooting methods by which is obvious - restart the printer. The flashing light has not disappeared. I have checked for jams, reinstall the carttridges and opened and closed all the doors - and then restarted the printer again. I also restarted my PC at the moment. Aware of the printer light continues to blink. I then the 'X' button on the printer while the printer power off and power it back up. This (I believe) ran a diagnostic standard and print a test page. Everything seemed normal on the print. Power led is no longer flashing. I have Open the printer only and cancelled all documents -removed something that was there. Schecked double for all other printers (I) with the documents in the respective queues - nothing found. Also noticed that the printer status is "Offline."

  PART B: Now, I decided to print a simple Word document. This time the printer did nothing. No sounds, no lights flashing and no movement of the print head. I decided that I was going to unplug the USB from the PC and plug it into another USB port. This caused Windows to try to 'install' the printer drivers - I assumed that they would be fair here. However, I got the following popup status of driver-

  

  This, of course I worry about. Again, I have anoccupant to print a regular Word document. Printer has not responded at all. So I checked the devices Panel and printers and found that the printer has been listed but showing "status: troubleshooting needs. I right clicked on the printer icon and clicked on "Troubleshooting". Then I got this-

  

  Then I clicked "Apply this correction" - which was not a "fix." Simply, she re-launched Windows in order to install the driver. Which resulted in the same popup indicating the status of driver install - but have not installed. I checked the policies of the printer to make sure that no documents were persistent. There is no document for any printer listed.

  PART c: Now, I go to support and download the section of the HP Web site for my printer model. I have download the latest package of driver/software for my version of Windows. Once the software installation begins, it ends up by asked me to unplug the USB for my printer. I did it. Then later in the software/driver installation, it asked me to re - connect the USB port of the printer to the computer. I did it. Installation window has detected the printer, and a second course contextual view displayed between PC and printer - steps 1-6. The process seems to hang on step "5 of 6". Then I finally get it.

  

  The 'help' was not very helpful here. Basically 3 options:

  1. Make sure the device is connected to your computer and turned on. Click on the "< back"="" button="" to="" try="">(I tried this - even doesn't have a result). "
  1. If the configuration of the device does not complete, some hidden configuration commands will be over. Click on the "< back"="" button="" the="" wait="" a="" few="" minutes="" for="" the="" device="" setup="" to="">(also tried - waited 10 minutes - still not)."
  1. If the problem persists, check the troubleshooting section in the Readme file, located on the CD-ROM. (printer is 6 years old. I don't have the CD. At installation of this download. If it was not very useful).

  So I you click on "next >" and received a message that basically says that the installation was a failure and I should try again or contact support manufacturing.

  PART D: I found an article on the forum to Support HP here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8600-driver-not-installi... I followed BharathKumarK's long troubleshooting suggestion. did everything exactly as shown. No problem is. This does not solve my problem. I again ran MSCONFIG and passed my services and selections start back as they were before this troubleshooting. Once again, restarted my PC and started searching on Google and HP for more responses. Printer was still in "Troubleshooting" in Control Panel devices and printers (as in part B above).

  PART e: I found an article on the Forum of Support HP, who suggested to use the "HP Print and Scan Doctor" to solve problems. I have downloaded and installed on my PC. The program Ran. It considers the K8600 printer and I clicked to move forward. Then I get this message-

  

  I know by the failure of installation described in the PART C it was true - thank you for what is obvious. At this point I quit a job for a whole day solve this printer. Then... of course I click on 'Get Installer' -knowing full well it's doing nothing, most I've tried to do. Yet, I'm still as advised. Download the driver/software package. Followed the steps - even ONCE got to 5 from step 6 and hook - finally showing all the same mistakes as in PART C.

  PART f: now I'm suspecting there may be cord issues. I have a HP Officejet H470 in the closet. I have it pick up and borrow the very short USB cord of this printer. It is a USB cable that is supplied with this printer. I have disconnected the K8600 current USB cord and plug the borrowed cord -it was too short to reach my office upstairs. So I put on my laptop. It is also a processor 2 GHz Intel i3, 6 GB of RAM on Windows 7 Pro 64-bit (Service Pack 1) OS. I have connected the printer to the laptop. Open an regular Word document and print. It successfully to print! I thought I had found the question - faulty USB cord! # Because of the way that the printer is on the wall and the cord is so short, I had to unplug the laptop USB to the laptop. Now, I come back and try printing another document I needed - I think that it was something from the internet. I pick up the laptop and Plug the printer into the laptop. Send the print job, printer sounds like it is about to start printing and then... nothing. The printer power light begins to blink. So I tried the same basic troubleshooting - restart the printer, by restarting the laptop... etc. I have to unplug the printer from the laptop. Finally, received the fire of the printer goes in now the key 'X' on the printer while the power on the bike. For the moment no diagnosis is printed by the way. Now I Plug the USB into the laptop. Windows picks it up and tries to install the drivers... as in PART B above. Now I'm back in the vicious circle of the same question on the laptop troubleshooting. Which I followed the PART Aand PART B , PART C... .the everything with the same failure.

  PART g: Now I'm frustrated beyond comprehension. It's day 2 of troubleshooting! I need to get back to work. I decided to leave the only K8600. I have to turn on the HP Officejet H470 mobile printer. I plug in the laptop - as I still need to print a working document. Windows picked it up and I got the Windows Installer popup of pilots. Got EVEN COULD not install driver message described in PART B!

  BOTTOM LINE:

  I need a printer. Printers that I have in my office are now overpriced paperweight. I don't know if it's printer problem, cord issue, Windows 7 problem or USB port problem... but I need help. So I spent all the morning writing this as detailed as possible, in an effort to last stitch to beg for help! Someone at - it still reading this? I swore if someone suggests one of the steps I've already tried... I think I'll hit the roof!

  Thank you

  Benji

  @John_Getzke

  Your last solution doesn't work anymore. HOWEVER... I have found the solution in an IMPROBABLE PLACE!

  Was this morning in Microsoft Excel and clicking on enter far into my stats in morning, and strictly out of habit, I clicked to print. It gave me an error message that I had never seen. (photo here)

  

  So I googled "error message 'The domain Active Directory Service is currently unavailable'". I came across a Microsoft support forum: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/when-searching-for-a-printer-i-get-error-the/e3681f75-93bc-4779-88e2-dd0e5192202a

  Someone on this forum (several entries) suggested something on Notepad.

  I thought that "it IS STUPID! IT DOES NOT WORK! "But what the 7734... I'll try it anyway... IT WORKED!

  SOLUTION

  1. open Notepad.

  2. under file > print.

  3. click on "add a printer".

  4. a pop-up window displays and asks if you want to set up a LOCAL or NETWORK printer. (Mine was LOCAL)

  5. Select the printer port (mine was USB001 (virtual printer to USB port))

  6. you continue and gives you choices for type of printer on the left (IE. HP, DELL, BROTHER, etc..) (Mine was HP)

  7. on the right, you select the model of your printer. (Mine was HP Officejet Pro K8600)

  8. click Next, and a prompt QUICKLY introduced me with (over quickly) status bar and went to options "Printer Name" and "printer sharing."

  9. the last prompt allows you to "print a test page.

  I clicked on the test page printed and was SUPER HAPPY here my printer immediately start printing! Boxes printing and notebook. I went back to my Excel file. Clicked on print and VOILA! Print like a charm!

  I really hope this helps someone else out there. I wish I could tell you why it works or what was stopping Windows and HP of the installation of the printer, but at this point, I really don't care. I CAN PRINT AGAIN!

  Thank you John for trying to help with this problem!

• Satellite 2805-S201: AC power light flashes orange 8 times

  Hello

  I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
  After that, the AC power light flashes orange 8 times and recycle.

  It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

  Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
  No, the PCMCIA card is not always connected

  Any thoughts?

  CA

  Hello

  The flashing provides a micro code which refers to the hardware failure.
  But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
  But it is of course, in most cases, it s a hardware problem of motherboard! ;(

  Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.

• Qosmio F20 won't start - power light flashes orange

  My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

  I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

  I am really puzzled.

  If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
  In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

  They have manuals containing instructions and the exact description of the code how do I solve this problem.
  Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.

• power light flashing wn3050rp

  I have a wn3050rp extension

  its power LED flashes all the time

  I installed by mistake inside wn3000rp firmware

  and since then, its power light flashes

  Help, please

  http://KB.NETGEAR.com/app/answers/detail/A_ID/22688

  see this

  It will help you

• Lenovo B590 Orange laptop power light flashing

  Hello

  Recently, I noticed that my B590 Lenovo laptop indicator light was flashing orange. I tried to restart the notebook and by ensuring that all the plugs are secure, but nothing is indeed it. That means the power light flashes average orange?

  ~ Laila

  Hello

  Just wanted to give an update on this issue, in case someone else runs into a similar situation. As I said, I'm under market entirely adapter. I found that the old ground had not been eradicated because if you go out without replacing, it leaves a gaping hole in your laptop!

  I solved the problem of blinky light orange by disconnecting the battery, but leaving so much, with little electrical tape, to hold it in place that it will protect the pins bit inside battery - thanks for the link to the manual, it is also useful.

  Mahalo,

  ~ Laila

• You are using windows 7, how can I get my Officejet Pro K8600 print on paper 13 x 19?

  I bought a laptop with Windows 7. Now I can't get my Officejet Pro K8600 to print correctly on paper 13 x 19. It prints on paper 13 x 19, but everything is 8.5 x 11 in size. I click on print, click Properties, change the Super B 13 x 19 paper, press ok, watch box paper 13 x 19 with images by filling out the document, I click ok to print and it prints the image 8.5 x 11 in size on paper 13 x 19 rather than fill the paper 13 x 19. I did not have this problem (and still haven't) with my old laptop with XP. It is the operating system or is it a bad setting in the properties? I tried to compare the property settings in both computers, but I can't find any differences. I don't think it's the driver... Please help!

  Hello HW,.

  Try this: go to devices and printers and right click on the of K8600 Officejet Pro and click on printer properties. Go to the Advanced tab and click on the button called Print Processor. Select Winprint. Try another print and see if it works now. If you still see the same question to see if there is an option of scaling in the print dialog in the application you are printing from.

• KDL-46XBR9 shuts off and the power light flashes red

  KDL-46XBR9 shuts off and the power light flashes red

  It flashes ten times, then rehearsals.

• OfficeJet Pro K8600: Officejet Pro k8600 - cannot print

  Without warning, my printer does not print. It captures no paper. Error Msgs alternate between paper jam and load paper. I checked carefully for a paper jam and to blow off the dust, compressed air system. I tried online support - no help. Could not find a phone number to call and does not repair in my area centers. Any suggestions?

  Hello @Grammy72,

  Welcome to the Forums of HP Support!

  I understand that you are having problems of paper when you try to print from your computer Windows 8.1 for your HP Officejet Pro K8600 printer. Please include in your message that you have already done all the troubleshooting steps that are available on our Web site.

  At this point, please can I you look at the two support documents. Be sure just to what action has been forgotten.

  • "Out of paper" Message
  • Message "paper jam".

  If all the steps have been completed without result, I would recommend reaching out to the Technical Support queue by phone to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• HP Officejet Pro K8600: Hp Soloutionn Center

  Until I updated to Windows 10 I was always able to see my Scanjet G4050 and Officejet Pro K8600 on the Center soloution allowing me to display the printer Toolbox. However, Windows 10 post I recently lost all access to the printer. I tried to reinstall all the software for the printer, but the dvd does not work on windows 10. The printer and scanner both work fine, but I would really like to find a way to get the Solution Center to recognize my printer.

  I have a printer HP laserjet Pro 200 which I could never find a way of listening through the Solution Center.

  Is there anyway I can get the solutions Center to see all my HP devices?

  Thank you there

  Hello

  The drive is not designed for Windows 10 as it ws made be communicated before the operating system.

  Download and follow the below tool, it will retrieve the latest version of the Windows 10 software for your devicesm then you should be able to use the HP Solution Center:

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Kind regards

  Shlomi

• HP 3845 printer power light flashes

  Power light of my printer keeps flashing and I can't print anything. I ran the HP software troubleshooting, reloaded drivers, turned off and restarted, fired cartridges and checked for jams. NO JOY. Can I get a test page to go to Quebec, but it will not be printed. This all started when I tried to print a form the net. Has not worked since,

  Hey Mics.

  Thanks for the update.  The Deskjet 3845 is a printer function and I have all the information to reset on this model.  If power cycling the printer, uninstall/reinstall, etc. have been unable to solve the problem, it seems to be a hardware problem with a sensor in this printer.

  I recommend a quick test if you have availability.  You have another computer, you can try to connect this printer?  It is possible that the question is one of the queue stuck in this PC information and not a problem with the printer.  If you connect the printer to a different PC and you have the same result, so I suggest looking into replacing the product.

  Contact HP worldwide | HP

  Hope this helps,

  Jason

• Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

  My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

  * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

  Hello

  If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

  If it is under warranty, contact a local reputable computer repair workshop

• Cyan fails from one page to another on Officejet Pro K8600

  I have an Officejet Pro K8600, installed on XP. A nearly full cyan stopped working in the middle of printing from one page to the other - tried all the patches.  No msg error - says all cartridges are full. Buy HP new cartridge, always did the same thing. I uninstalled and reinstalled this morning. First page of diagnostics showed labour cyan on the first block, broken on the second line. Then would not work again at all. Do I need a new print head? The health of the print head shows that both are OK. Thank you! Very frustrating. It's a good printer!

  The Officejet Pro K8600 has ink cartridges that are separated from the print head Assembly.  The pipes of the unit ink cartridges in the front lower left of the printer internal for the print heads.  With this type of printing mechanism, a print quality problem, for example a missing color, usually resides in the printheads of the unit.

  I'll try to run 3 levels of the print head cleaning utility in the part of the Toolbox of the software for this printer.  Thus, there is a document with steps to help solve a problem of print quality in the K8600.  The document can be accessed here.

  Let me know how it goes.