HP All - In - One psc 1315 Series

Similar Questions

• printer all-in-one PSC 1315: check the ink cartridge light flashes

  the last time I printed the page came out very laboriously and slowly. The next time I turned on the print cartridge check printer is flashing. My specific request is the medium that contains the cartridges is a little loose (up and down) approximately 1/16 "or more. Is this normal? Thanks in advance for any advice...

  It is normal that there is to play in the transport. Slow printing is caused by the failure of one of your cartridges.  The document here may help address the error lights.

• HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

  The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

  Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

  From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

  I am running a computer portable 64-bit windows 7, home premium and USB connection.

  Hey @TKStall,

  Thanks for getting back to me with the error messages.

  The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

  Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

  Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• J611 for the all-in-one Deskjet 3050 series has

  I want to download the software for my printer on my laptop. But the CD for the printer cannot download because it does not support Windows 8.1. So I thought that I can just download the software from this site, but I do not know what to use because I can't and repeat not CAN NOT find my printer model.

  This is exactly "Deskjet 3050 a all-in-One J611 series." No J611A or J611C. Just J611 series and I was responsible for research and the research, but not a thing pops up except for the other numbers. What is the difference between these?

  I am frustrated because I'm not find my answer.
  Please help ASAP!

  Hi there jiffanyyy,

  Sorry to hear things are not easily with installation.

  A utility that I used in the past is the printer Installation Wizard, it is automatically on what exact model/series of printer tries to be installed. Then it downloads the right software for you and allows you to perform the installation.

  Here is the link: http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe

• C410 Photosmart all-in-one with fax series problem

  My Photosmart Premium FAX e-ALL-IN-One c410 series does not receive faxes.  It is on the automatic response and the phone rings (with a fax signal), but it does not pick up. Can you help me? I was able to send a fax the other day, but before that was a little more difficult.  I ran the test fax several times and he said: it is spent.

  Hello

  Here is a document that will help you check your fax settings and solve your problem. Since you have already performed the fax test, you can go directly to the #2 Solution.

  http://support.HP.com/us-en/document/c01632148

  Good luck!!

• drive to scan hp all in one hp 1315

  Hello

  I have a HP 1315 all in one scanner.  I don't have to use it and wishes to give to a friend but am unable to find the discs.

  It you will find the drivers needed and everything she needs for her online?  Thank you.

  Sounds liike that simply reload your software. Here are my instructions on how to do it properly and do a clean uninstall / reinstall:

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=61956

  Install and let me know the result!

  Have a great day!
  

• PhotoSmart 6510 E: all-in-one Photosmart 6510 series is no longer able to connect

  I have recently inherited this printer and eventually got it working a few days ago. Now, I'm more able to print wireless from my computer.  My computer recognizes the printer and I have the ability to print with it, but for some reason any, he says: my printer does not respond when you try to print wireless from my computer. I can print by sending documents to the e-mail address of my printer, however. WiFi is configured and works according to the configuration page I printed.

  Any thoughts?

  Hey @reyn5013,

  Welcome to the Forum from HP Support.

  I understand that you are unable to print from Mac with your HP 6510 Photosmart e-all-in-one printer. I would like to help.

  I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• PSC 2110 All In One: PSC 2110

  My Dell laptop (Windows XP) and PSC 2110 worked great until recently. The printing process stops just after it starts, then some rattling noise, like snapping plastic come from the printer. I have turned off and on again, I uninstalled and reinstalled the printer several times. I tried to use printing HP and doctor Scan that did not help. I tried updating the driver, no luck.

  Any ideas?

  Hi @MattU12,

  Thanks for getting back to me.

  Let's try a different approach and troubleshooting from a software point of view.  Try the following steps:

  Delete temporary files on your PC

  1. Click on Start and then run.

  2. In the text box on the run window, type%temp% , and then click OK. A folder full of files and other folders will appear.

     All the folders and files that you see in this Temp folder are no longer used by Windows XP and can be deleted safely.

  3. To remove files or individual files, hold your Ctrl key while clicking on each item you want to remove. Release the Ctrl key when you are finished.

     To remove these items, press your delete key or choose file , then delete from the menu.

  4. Confirm that you want to delete the files by clicking Yes in the window to confirm deleting multiple files that opens.

  5. If you want instead to remove everything inside the Temp folder, choose Edit and then select all from the menu.

     Note: If you are prompted that there are hidden files in this folder, simply click on OK to dismiss the message. A few hidden files hanging out in the Temp folder probably aren't significant enough to worry about.

  6. Now that all the files and folders are selected, press your delete key, or choose file , then delete from the menu.

  1. Confirm that you want to delete the files by clicking Yes in the window to confirm deleting multiple files that opens.

  2. After all the files have been deleted, you can close the window and empty your trash, permanently remove the files from your PC.

  Tips:

  1. You may receive a message error deleting file or folder , while files are deleted. It simply means that one of the files is used by a program right now. Click OK, close all open applications and repeat the steps above. If you still receive the message, try restarting your PC and repeating the process again.

  Source

  Then, stop and restart the print spooler:

  1. Click the Start button, select run.
  2. In the Run dialog, type "cmd" and click OK.  
  3. In the command prompt, type "net stop spooler" and press the enter key to stop the spooler
  4. Then, type "net start spooler" to restart the spooler.

  If the printing problem persists after that, click on click here to find out how to disable your Windows systems via MSCONFIG Services to determine if there are programs or services interfere with your ability to print.

  I would like to know how it works for you.

  See you soon,.

• I need d 5510 all-in-one hp photomart series driver for my printer

  I am not able to install the driver for my printer hp

  fredrena wrote:

  My operating system is windows 7 Home premium

  Hello

  As mentioned above, the package is for all Windows since XP 8.1. Please download and install on your Windows 7 machine.

  Kind regards.

• HP DESKJET 3050 ALL-IN-ONE J611 a series.

  I have an 0XB0402134 error Code. Printer is locked up and won't even power off. That is what it is?

  Hey Frank. Sorry to hear that you have problems with your printer. This error is a generalized ink system failure message. Try working through this support document to see if it helps to solve the problem. If this is not the case post back with new details and we can move on to the next step.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  Good luck!

  Sean

• My printer all in one photosmart hp series C4380 does not meet HP Solution Center

  HP Solution Center does not open upward

  Hello

  HP Solution Centre worked before? What is the OS you have.  The HP Solution Center throws an error?

• printer all in one psc 2210xi while trying to align the cartridge HP (Vista) "paper mismatch".

  I changed a cartridge and try to align the cartridge but keeps paper be ejected with message "paper mismatch" on the front panel of the printer.  Same paper and size I always use but I changed out, unplugged and reset the printer and made sure pc the printer settings are compatible with the paper type and size as well.  Still no luck.  I know that this printer is older but it was gently used

  In fact, I had already read the news you mentioned me and it did not apply to my situation of paper.  I was using standard letter size paper and had not changed type and size.  What I found useful is a blog that mentioned by changing the properties of the printer; printing preferences; type.  I got the paper type "automatic" and I changed to "plain paper" as the recommended blog.  After that, I was able to align the ink cartridges and print as usual.  I still have no idea what caused the problem in the first place since the previous setting was what I always used.  Thanks for your interest.

• HP psc 1315 all-in-one will not scan

  My all-in-one HP 1315 machine is more scanning documents. It copies and prints without any problem, but I can't scan. After I have put a document on the glass and press the "Scan" button, the "On" flashes several times and then the machine makes a short noise and then nothing. Can anyone help to troubleshoot the problem please?

  Jamieson, goodnews. Myallinoneprinternowscansagain.Ithinktheproblemwasthatthesoftwarehadbecomecorrupted.SoIuninstalleditandreinstalleditandthatseemstohavedonethetrick.Thanksforyourhelp.SJAEFF

• DeskJet 3050 a all-in-one J611 series will not print office with windows 8

  Hello, I'm setting up my office of engaged couples to my HP DESKJET 3050 ALL-IN-ONE J611 a series. It is said that he only supports the other windows, windows 8 not being is not one of them. Two are wireless and I thought that there must be a way to download a software that I can install in order to connect to this computer. Please any help I could get would be appreciated.

  Hi there @tabatha46

  Welcome to the forums

  Yes, the Deskjet 3050 a printer is compatible with Windows 8, and I will share a link below to download the driver and software. If you have any questions, please let me know and I'll do my best to help!

  HP Deskjet full feature software and drivers

  Happy Wednesday