HP psc 1315 all-in-one will not scan

Similar Questions

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• 2210 all-in-one will not scan

  I recently bought a new laptop - ASUS with Windows 7 64 bit. AIO drivers loaded very well except for a couple of files that I ignored. Device will print but will not scan and the annoying message "an error has occurred with the scanning device. Please make sure that the scanning device is properly connected and try again. "can't stop appear or not, I use the device.

  I've uninstalled and reinstalled the software several times now. Even two files have a problem, but otherwise all the print functions work well. I have yet to test the ability to fax, but the unit will not scan and does not open a device icon or desktop HP Director.

  HI Black-Rhino,

  The pop up message is probably caused by the following software (software HP PSC & Office Jet). I want to uninstall this software using the Control Panel Add/Remove Programs, and then, when you connect your printer to the computer, Windows 7 detects hardware and automatically installs the correct driver. A notification lets you know when the installation starts and when it is completed. You are not required to download any software or insert the product CD.

• HP Photosmart C6180 all-in-one will not scan mulltiple pages

  My C6180 will not scan more than one page from the charger. After it scans a page will scan others by using 'add page '. I would analyze all the pages since the charger without manually add pages. I'm used to be able to do. Help, please.  Thank you.

  Have you contacted HP Support for your printer/scanner?

  http://support.HP.com/us-en/product/HP-Photosmart-C6100-all-in-one-printer-series/1153695/model/1153698

• My "hp psc 1215 all-in-one" will not print.

  Windows Vista 32-bit,

  I can't print from my Dell laptop inspiron 1721.  There're are equipped with two new b/w & color cartridges.  The print queue will not let me delete when status says it is printing, but ' nt print.  The printer works when it is directly from the printer & scans of the printer to the laptop.  How can I solve this problem?

  Error 0 x is a generalized ink system failure message. There are a number of reasons that would entail. I would have pasted the instructions in my post, but this document is pretty length the nature of the error.

  http://support.HP.com/us-en/document/c03081973

  Work there to try to resolve the 0 x... error, you receive. Let me know if this or does not resolve the problem.

  Good luck

  Sean

• My Photosmart C3180 all-in-one will not scan.

  Get Installation error 8, [(8,0,0)], then press the 'OK' button to continue. Complete installation - printer OK, but not scan.

  Have tried all the options within the "error of Installation of the HP" without success. "HP solutions Center - 'guide' gives no action.

  Seems to be all 8 sections OK and going to "finish the screen. Connect the printer and "install device driver" is displayed. Close this at the end of "the device is ready for use. The "software Setup screen appears again and then comes to an end, when the ' screen HP Solutions is started." I tried to scan from there, but still get the error "8,0,0" described above. As I said, the HP Solution Center - Guide (for a solution) either do nothing, Windows Control Panel product "program stopped working." Printer/scanner worked with this Win7 for almost a year, before getting this problem. There was also the C3180 in recent years through Win XP & Win Vista.

  Not sure if the problem is hardware, A) B) Windows, software HP C) or (D) the file downloaded "AIO_CDA_NonNet_Full_Win_ WWW_130_140".

  We'll see. It could be all three issues you have described. However, let's test a few things. First first, let's do a copy on the printer itself, see if she did this and that will prove its functional. Other hardware issues maybe a defective USB cable. Then you can consider replacing that.

  Then for the software, I want uninstall you devices and printers, programs and features, Device Manager. Then in the menu Start menu type "%temp%" and press ENTER. Delete all the files. Some will not delete, and it's good.

  Then download the files on the site.

  Make sure that the USB cable is disconnected through this process.

  When you reinstall message out there and let me know the result.

• HP psc 1219 all-in-one will not print. Work queue says "error".

  Operating system: Mac OS X 10.6.8 on a Macbook 5,2

  At first, I was getting "printer offline" error messages when all cable connections were good.

  I uninstalled and reinstalled the driver software on the HP site and now the macbook and printer communicate and the box of the print queue now says 'ready' printer. However, in the column State he only says: "error".

  When looking for the installation on the site of HP software there is no sign of drivers for the 1219, only a few others in the 1200 Series, but I think there all the same files anyway...

  I can't scan or the other.

  I have to add that I tried to right click in the box that says the list if printers and delete all, then add the HP printer back in.

  Can you suggest anything? Thank you.

  P.S. When I connect the printer to a different macbook a message asking if I want to install the software. I downloaded automatically in this way and can now print one from this laptop, but not my own!

  Fixed! Instead of manually install the software on the HP site, I made sure that everything has been uninstalled and printers reset. I then rebooted and did a software update check by clicking on the Apple. The laptop then found the right software itself and it works fine.

• HP psc 1205 all-in-one, will not print copy.

  my printer is connected to my computer, normally when I want to make a copy (ie) using the upper part of the printer, I had no problem but now it does everything it is supposed to do, but does not print, (ie) no copy ink cartridge is full. I can print from the computer.

  Hi @sammymax

  I had totally misunderstood, thanks for the clarification.  Since you can print from the computer, but not copying correctly, I suspect that the issue could be the lamp in the scanner. We will perform a hard reset. To do this, leave the printer and disconnect the power supply for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  If the problem persists, please call us. We can get you a discount on a newer model. If you are in the Canada or call 800-474-6836, or you can Contact HP worldwide.

  I hope this helps.

• HP Pavilion p6780uk: my hp Photosmart C4180 all-in-one will not scan after update to Windows 10

  Not sure if Windows (32-bit or 64-bit) 10

  Welcome to the community of HP, @DavidJ70

  I came across your post about how you are unable to analyze after upgrade to Windows 10 and wanted to answer with my suggestions.

  First run Installation Wizard printer here: use of diagnosis HP for printers HP Windows tools

  After that, the feature complete driver and software must be installed for your printer on your computer. Try to scan the image. If there are problems, let me know all the details, errors, etc., and I'll do my best to help!

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Best wishes

• HP7520 all-in-one will not scan in the document

  I'm scanning very old recipe cards.  No matter how to activate the map, or when I put it on the screen, at least one edge is cut, including the automatic feeding system, which is my preference by train.  The cards are 3 x 5 or 4 x 6.  I can't find anywhere for this HP7520 the settings.

  Barbjth2,

  Welcome to the HP Forum.

  We know not if you want to scan in receipts in the form of images or text.

  Regardless of the end point, the following might help.

  With the complete installation of the software functionality for the printer and assuming a recent version of the Windows operating system, you should have the shortcut Wizard printer installed on your desktop.

  Double-click the Printer Wizard shortcut > scan a Document or Photo >

  Select Photo of Document OR file file (as you prefer) >

  This starts the process to create the sweep.

  On the side right of the menu, under the Scan size >

  Select, in the menu dropdown > any scanning area

  The rest of the selections can generally be left as default values, even if it's for you and your situation.

  • In order to ensure that the results meet your expectations, do not forget that the scan preview is CHECKED.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• HP Officejet J5780 All in one will not scan

  My HP Officejet 5780 all-in can't scan it copy, fax, print, but has an error on scanning then someone please help me.

  Hello

  1. What is the accurate and complete error message you get?
  2. do you and changes to the computer before the show?

  If you are using HP software to scan, I suggest you try the steps from the following link:

  I can't scan in Windows using the HP software
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&LC=en&DLC=en&cc=us&product=3301296#n56

• My HP C7820 all-in-one will not scan a document to my computer. The menu says no scan option

  How can I get to operate. The computer is using windows 7 Professional 64-bit

  Download and install the drivers and the newest comprehensive software on the HP website.  Try now.

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• PSC 1210xi all in one is not responding

  My psc 1210xi all in one does not. I was able to use the copy feature stand alone and also print a document from my hp laptop (Windows 7) successfully last night. (After plugging on this laptop for the first time by the way.) Now I am trying to print a document and it will be queued, but never print.  I tried to copy something to see if it would work and it copied correctly. It is a problem between my computer and the printer I guess.

  Tried unplugging and waiting, then reconnect. NA not doing things running.

  I read a post where it was suggested to remove items from the queue and I tried it. I tried printing again later and it will not print.

  This printer is set as default printer. Nothing more (CD, instructions, etc.) accompanying. The ink is brand new and the printer is not jammed or showing signs of error paper.

  She just never print what is in the queue. Thank you for your help.

  OK got it works by trying the spool print cancel and restart method ONE MORE than TIME. Not sure if I just did not it properly the first time, or if the printer Goblin left to go bother someone else. Thank you very much.

• HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

  I get the following installation error when you try to install the HP PSC 1315 all in one.

  [code 1632. The Temp folder is on a drive that is full or inaccessible.

  Free space on the drive or verify that you have permission write to the Temp folder.]

  Hi @tasos251,

  I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
  4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.