HP C7280 / Windows 7 (64 bit) / Solution Center

Similar Questions

• HP PhotoSmart Prem 310 Series: Installation on PC Windows 8.1 HP solutions Center

  My printer is a model 310 that I bought in 2011.  The DVD accompanying installation supports Windows XP, Vista and 7.  The version number of the DVD is 14.4.0 and I used it to try and install "HP Solution Center" on my new PC for Windows 8.1.  What I get is a picture of a building with a few plants in a pot by the door and and a sign in front of the building that says "close this application".  On the left are the words "select install to begin the installation of your new HP device."  The problem would then be is that there is no click a button "install".  The only button I can click is 'out' and it then closes the installation.  I think I need a Setup DVD update sent to me or instructions on where I can download the installation of HP for Windows 8.1 solutions Center.  I don't have a problem with printing because my PC, the printer has detected and installed the drivers from printert.

  Thanks in advance,

  Ed

  Hi Ed,

  Of you can still have problems, download and install the software from the following link:

  http://ftp.HP.com/pub/softlib/software13/COL59888/MP-143684-1/PS_AIO_07_C310_FSW_Full_Win_WW_140_408-4.exe

  Before installing the drivers do not forget to open the control panel > devices and printers.

  Right-click any existing C310 icon, and then select Remove an instrument.

  Once that icon removed turn the printer off, only turn on once the installation request to connect.

  Kind regards

  Shlomi

• HP Photosmart C6180 all-in-One: after upgrade to Windows 10 my HP Solution Center software does not open. It flashes only.

  After the upgrade to Windows 10 does not open my HP Solution Center software. It flashes only. I tried to uninstall and reinstall the software but the problem continues.

  Hello

  Right-click on the Start button and select programs and features.

  Click View installed upadtes and search for KB3132372.

  Uninstall the specific update, then try running the center of HP solutions again.

  If it works fine, I suggest hiding the specific update for now using this tool:

  https://support.Microsoft.com/en-us/KB/3073930

  Microsoft and Adobe ar to aware of this problem and currnetly investigation.

  Shlomi

• Ultimately it is there no response why C7280 cannot re - install with Solution Center.

  Student/XP Home Edition / professional programs

  1.2 g memory

  Service Pak 3

  Toshiba Satellite Tablet (circe 2006, former of the tablet with the swivel screen, not the new kids)

  HP C7280 all-in-one wireless printer

  The first time, the first time I installed the new wireless C7280 on this machine in 2006 was a bear. Apparently after hours with tech support they said it was because a Lexmark printer was also installed. I knew that you might not ever have 2 printers installed at the same time?  Finally, we got to work.  There is, then, no. I tried to uninstall and reinstall. TI said it is already there (it is a registry entry falsely saying so?) or it is impossible to find all wireless printers.

  On advice, I went to install the printer and manually found my router and it has now got this infor on board. Now, I can print with any program that prints. However all the functionality of Solution Center is lost because when it is in this part of the installation, it hangs. So I have disabled all background programs... it still doesn't work.  Apparently, I can't get this completely off the HD HP and then he wants to think there are already present HP.

  The only recourse that I can see is to make a full recovery with discs!  Then install it.  Do you know what that means?  All the paks services, all updates for the past 6 years!  Formidable!  I wonder still find the paks of Service and updates for XP?

  I can't understand how somone has not met with a cure for this. I tried all the suggestions that I know.  But the bottom line, there must be no answer how to get this feature full working C7280 all once again. It's a pain since the beginning. Now in regards to the printer, I have no complaints, he worked 6 years no problem, but the associated softeware was very disappointing... very!   jack (I'm open to everything you can think of that I have not tried.

  I tried to write my signature in this area on the screen, but it doesn't seem to work? : v lol

  I'm sorry to hear of your difficulties, but I'll do what I can to solve. First of all, just to put in place a good base to work line, allows to perform a full and clean uninstallation and reinstallation.

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-52268-5&CC=us&DLC=en&LC=en&OS=228&product=3204785&sw_lang=

  Install and let me know the result!

  Have a great day!
  

• I am running windows vista and my solution Center tells me that my printer is not completely installed

  I re-installed the printer (photosmart all-in-one B209a) and I get a message every time I try to access the center of solution that my printer is not completely installed. In addition, the HP does not appear in my program menu. Help!

  Hello Gordon,.

  I want to thank you for all your help. It has been very frustrating for me to not be able to solve this problem. However, with your help, I learned a little. As I mentioned previously, I am not savvy in computer science.

  The installation that I downloaded from the HP site seems to be useless. Fortunately, I found my installation CD and was able to successfully install it with the CD. I now have my rear HP Solution Center, and everything seems to work well. No message more that it has not been installed correctly or the pilot is missing.

  I did however, buy another printer. So I have now two printers. If I am given the penalty, I can use the other until I understand what could be the problem.

  Once again, thanks a lot.

• WINDOWS 7 64-BIT MEDIA CENTER HAS STOPPED WORKING

  My windows Media Center has stopped working and cannot find a solution for this. Also lately my firefox acted weird sometimes having go to the Task Manager and ending the firefox 32 * process to reopen. After a while, I decided to upgrade to 4.0 but I disliked a lot and tried a restore. So now my Firefox exe. is missing and cannot be found. I scanned the registry and fixed everything that it emits found but nothing to do with firefox. I tried a repair to boot with the windows disc 7, but nothing works. If anyone can help me pleeeeaaassseee, I would be very happy.

  Hello

  ·         What happens when you try to open the media center?

  ·         What is the error (if any) that you found?

  ·         When is this last work fine?

  ·         Did you change to the computer?

  
  Try under methods:

  Method 1: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:
  I suggest you to turn off then turn on windows Media Center on the extension of the functionality of the Windows media enable or disable features and check if this solves the problem. See the link below to display the window for deactivation and activation of windows media player-
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  For firefox. I suggest you to contact mozilla.

   

• HP Photosmart all in one printer C7280 Windows Vista 32 bit.

  My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

  I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

  This problem?

  Thank you

  ducksterman.

  Hi again,

  If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

  Or

  To restore the default settings

  1.

  Press Setup.

  2.

  Press to select Tools, and then press OK.

  3.

  Press to select Restore Factory Defaults, then press OK.

  The default settings are restored.

  Let me know if that helps...

• Cannot install Lenovo Solution center 3.2

  I have a W520 I've updated from Windows 7 to Windows 10. Lenovo Solution Center gave some error messages about missing items, Solution Center 3.2 installer so downloaded. When I try to run the installer, it is said "the operating system is not enough to operate the Lenovo Solution Center". I uninstalled the 2.8 version to see if that was the problem, but got the same error message. I just reinstalled version 2.8 without any problems.

  Thanks, Aryeh, the 64-bit version worked. It is different from what is supposed to be the 64-bit http://support.lenovo.com/us/en/downloads/ds104501 version which is lscsetup_x64_32004.exe. On this page even though it says at top it is for 64 bit Windows 10, lower he says that the operating system that is supported is windows 10 32 - bit, so something mГЄlГ.

• The Officejet 8600 can be added to the HP Solution Center?

  The HP Officejet Pro 8600 N911g can be added to the HP Solution Center?   The 8600 was installed on a computer that already had installed HP solutions Center.  However, the 8600 is not detected by the HP Solution Center.

  OfficeJet Pro 8500 Wireless is already integrated in the HP solution on this computer center.

  Windows XP

  Hi Solution Center is used only for earlier models and the 8600 can be added. The 8600 has its own software located by launching the desktop icon for the printer or by accessing it through your programs > HP > product folder

• OfficeJet 4500: Solution Center

  Sinds last update windows 10 wil het Solution Center van op geen some wijze openen, reeds opnieuw geinstalleerd maar dat van geen Holland. Weet iemand wel Holland?

  Hello

  Thank you for using the forum.

  Try this solution:

  1. Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.
  1. Click the appropriate option.
  1. Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.
  1. Click on Uninstall and work through all prompts.
  1. Once uninstalled, the HP Solution Center should work.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• Solution Center does not correctly install Windows 7 64 bit

  I've looked everywhere on the forum about this but still do not have a resolution.

  I have a HP Photosmart C7280, I've had two or three years.  When it is connected to an XP machine it worked fine.  I have since bought a new PC running Windows 7 Home Premium 64 Bit, and although I tried over and over, install, uninstall and reinstall the software from the HP Solution Center, I can't work.  I really need to have the feature analysis of the Cluster Solution that I need to scan documents up to 100 pages.

  Is it possible that this software is not compatible with Windows 7 64 bit?  I downloaded the software later on the site of HP and my PC works always the latest updates of Windows 7.

  If I can't get this resolved, I'll have to buy a new printer all-in-one and believe me it will not be a HP this time.  Help, please.

  Please see below for more details.

  Here is the log of the error:

  

  Here's a sceenshot of the error:

  

  I followed the steps listed below and have had no luck.

  Click the Start button and type %temp% term or search programs and files of field

  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  Step 2 - download and extract to your system:

  1. Download latest features full software and drivers for your printer from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-71555-3&cc=us&DLC=en&LC=en&...

  2. once the download is complete, double-click the file to extract the software.

  3. once the extraction is completed, and the installation window opens, press the Cancel button to stop the installation

  4. click on the Start button and type %temp% term or search programs and files of field

  5 find and open, starting with 7z folder (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window (all your open windows), then in the middle of the desktop right-click of your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/?promoid=JZEFT

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Well I'm done chasing my tail.  It is clear that this is never going to work.  I tried to do the installation on another machine in 64-bit Windows 7 (gateway GT5228) which was a clean install and never had a HP product installed on it before and she's not exactly the same way.  I also tried a XP operating system installation and it works beautifully.  So my conclusion is that developers at HP simply no interest to this provision on Windows 7 64 bit, or they are simply too incompetent to make it work properly.  I am a software consultant in real life, and I do installations on servers is not as if I'm inexperienced.  I decided to buy another printer, but after this experience, it will not be a HP.  It is not just that a printer that works very well mechanically must be thrown on the junk-pile because the software cannot be upgraded successfully.  HP is not very favourable to the environment, creation of garbage where it could be avoided.  Sad and disappointed.

• Center Solutions HP for my PC Windows 7 64 bit Home Premium?

  Hi all

  Succesffuly I was able to install my printer HP 1400 of all-in-one series with my PC Windows 7 64 bit Home Premium.

  However, I can't activate the scan function or configure the printer scanning functions, since I don't have the software installled HP Solution Center on my PC Windows of Premum 7Home.

  This is the link to support HP for me to download tand install the HP Solution Center

  on my PC Windows 7 Home Premum?

  Thank you.

  Best regards

  -Warren-

  Hello world

  Follow the steps below and let me know what happens?

   

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

   

  1 download the drivers and full software features

  Note: Go to HP customer careand then enter your printer model. Download full feature software and driver and then follow the remaining steps below. If your product does not have the uninstall_l4 so please let me know what printer you have and the operating system you are using.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4 (.bat or .exe)

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP PSC 2110: need HP solution center software for hp psc 2110 running windows 7 32 bit

  Hello

  The HP Solution Center software has disappeared since I move my laptop HP OS from Vista to Windows 7 32 bit.  I use HP Solution Center for the years software to create PDFs of the documents scanned the printer HP PSC 2110 all-in-one.

  Can you give us the link to download Win 7 HP Solution Center software? I searched on the HP support site using the name of the HP PSC 2110 product, he pointed me to the section of the driver; I followed the instructions, but there is no link to download the software.

  The printer is connected via USB and works fine.  That's all just annoying that I can't use the HP Solution Center software (previously Director of HP) to copy documents scanned to my computer.

  Thank you.

  You are welcome.

  You can download it from the following link:

  http://sourceforge.NET/projects/naps2/files/3.0b1/naps2-3.0b1-Setup.exe/download

  This means that as an older model, its functionality is limited, but there are a few available workarouds. It is surely worth a try.

  For a wireless printer you will need another printer indded, there are many factors to consider and recommend any specific printer, you have specific needs? would be for example you use a fax or not, I guess, it should be a color with a scanner printer... Do you use to print photos or more often good for a daily newspaper, printing and scanning capabilities, these factors may affect strongly any possible recommendation for more information you will find useful.

  However, any current HP device with a scanner supports scan PDF scanning in the HP software.