Cannot install Lenovo Solution center 3.2

Similar Questions

• Cannot install the Solution Center in Windows 7 for HP7310

  I have a HP7310xi AIO that works very well until recently.  I've recently updated Win/XP to Win 7 32 bit and the printer software will not be installed correctly.  I downloaded and tried all the diagnostic tools that I can find on this site, nothing helps.  I can print but cannot scan due to lack of Solution Center software.  I want this to be a device connected to the network and part works very well with the printer, but I repeat, it will be no scanner - is network or USB accessory.

  I downloaded (several times) the file of the AIO_CDB_Net_Full_Win_WW_130_141 software, which is supposed to install the necessary software, but IS NOT INSTALL the Solution Center.  I tried HPPIW for installation and also HPHNDU and HPPDU for the diagnosis of the printer, and who work very well.  I also tried HPPSdr (who works for the printer, but not scan) and HPSDU, which does not at all.

  I still have my original installation CD and I tried, but of course it does not work with Win 7.  I also tried to uninstall the entire software package and then try to re - install, also without success.  It seems that the uninstall process is incomplete, or at least that's my guess.  I tried running also uninstall batch since the original installation CD files (the files to \util\CCC\Uninstall, Uninstall_L1, etc.) and they seem to work, but still the re - install subsequent does not install Solution Center.

  I recently ordered the customers a new installation CD, expecting a full installation CD for Windows 7 and receive.  The label of the CD says it's for "HP Officejet 6300, 7200, 7300 all-in-One-series", and also that it is "Version 13.1.0" and "Windows 7" and "Multiple languages"  It is the number of piece CB744-10003 and seems to be exactly what I need.  HOWEVER... This is ACTUALLY ON THE CD!

  Usefully, the label gives the following instructions:

  Insert the CD in your CDROM drive

  All Windows operating systems:

  (a) click on 'Start' in the task bar, then click on 'run '.

  b} type d:\Setup and click OK (where "d" is your CD drive letter"

  This is exactly what I expected to see on an installation CD; BUT there is NO "SETUP" FROM THE CD FILE!

  The content of the CD is exactly TWO FILES:

  AIO_CDB_Net_Full_Win_WW_130_141.exe, and

  AIO_CDB_Net_Full_Win_WW_130_141.MD5

  The first file is the same as I've downloaded several times on your website and many, tried several times to install.

  THIS CD DOES NOT CONTAIN WHAT THE LABEL SAYS WHAT IT SHOULD CONTAIN.

  I spent a lot of time on the phone with 'Technical Support' (telephone number 1-800-474-6836) and just got a huge evasive.  The best suggestion they could offer was that I should 'upgrade' my printer!  I know the printer is old, and I know that the printer itself is not supported.  However, I expect better than that of a software package that is supposed to take care this device on Windows 7 AIO.

  If I can't get this resolved successfully, I'll upgrade my AIO - but it WILL NOT BE ONE OTHER DEVICE HP!

  Hmm...  I have an Officejet 7410 similar, I used the same configuration file to install and have used it for a few years on my Windows 7 system.  A few questions:

  You have the printer connected by USB or network?

  You said that you had upgraded to Windows XP.  Was this a clean install on the XP machine?

  Are there any error messages during installation?

  There are a few things to try: If the printer is connected with USB, unplug it before you continue.  Navigate to the folder folder (open the Explorer and folder type in the address bar), look for a directory starting with 7z and a date corresponding to when you tried to install the printer.  Go to the util/ccc directory in the 7z... directory and run uninstall_L3, uninstall_L2, and uninstall_L1 files.  (This is the program of uninstalling the version of Windows 7, it might be more effective than the XP uninstall program).  After you run each file three batch restart the computer and log in as a user with administrator privileges.  At this point, run the Setup program.

• Cannot install printer solutions Center

  for a week I tried everything to install my all in one printer (F2400).

  That's what I do:

  I have uninstall all files via congurationscreen (remove programs)

  Clean computer with avg pc tuneup and regcure

  I run install (as admin) witch downloaded folder has been chosen for me by hppiw program

  During the configuration phase it is following error:

  Appdata/temp/TzS1867/hpzsetup.exe

  "irreparable error during installation"

  and the program says it automatically uninstall files, but they are always in the hp folder.

  printer and scanner work fine, but there is no solution Center.  There is no file .exe for solutioncenter in

  ProgramFiles/hp/digital imaging/bin

  I tried all possible solutions on the web, but nothing will.

  This link is no longer valid

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&LC=en&DLC=en&cc=us&...

  I can do more / I've done wrong?

  This link is no longer active

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&LC=en&DLC=en&cc=us&...

  Hey @brommmmm,

  One thing we know for sure is that your computer and the printer doesn't seem to like. I think that there are problems with your registry that are causing all these different errors, especially since the error log for the program installation continues to point to the registry key: HKLM\SOFTWARE\Hewlett-Packard\Install\ {BCDD692B-17 2D-440-9A1B-501C71D72CC8} for permissions problems. I have a little more suggestions to solve these problems in System.

  Step 1: Uninstall your printer software and drivers

  Step 2: Run the CCleaner on your computer to fix registry issues:

  CCleaner

  Step 3: Unlock hidden Admin account:

  1. Open the display Start again by clicking the Windows start at the bottom of your computer screen icon or by selecting the Windows button in the bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type command prompt
  3. Once the result of the search for the command prompt appears, do a right click on it and "run as administrator"
  4. Once the command prompt opens type: net user administrator / Active: Yes and press ENTER.
  5. Then, restart your computer
  6. When your computer turns back on, you should be able to log in to the new administrator account that appears. This account will not have a password on it.
  7. If your computer will automatically connect to your normal spending users user account and log on to the administrator account.

  Step 4: Install printer:

  1. Once you are logged into the new account administrator download and run the installation of your printer: HP Deskjet F2400 all-in-One series Full Feature Software and Driver
  2. Start the installation of your printer.
  3. Once the printer installs successfully log on the administrator account and log in to your normal user account. The printer should now be installed on your normal user account.

  Step 5: Disable the hidden Admin account:

  1. Open the display Start again by clicking the Windows start at the bottom of your computer screen icon or by selecting the Windows button in the bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type command prompt
  3. Once the result of the search for the command prompt appears, do a right click on it and "run as administrator"
  4. Once the command prompt opens type: net user administrator / active: No. and press ENTER.
  5. Then, restart your computer

  Please respond and let me know if everything works now. Fingers crossed!

• Cannot install HP Solution Center (Windows XP) software

  I tried to install or uninstall the software "HP Solution Center" which is part of the FULL suite of packages included in the download of the software "OJP8500vA909_Full_14" for the printer HP Office Jet 8500 A909 (WIndows XP).  When I try to install the package I get the following error: the installer has encountered an unexpected error installing this package.  This my indicate a problem with the package.  The error code is 2732.

  I tried the washer HP (OJP8500vA909_Corporate_Scrubber_14) and the Microsoft utilities 'Fix it' completely 'UNINSTALL' and clean up the previous installation.  However, who has not corrected the problem.

  Note: All other software (wireless installation/update / web / print drivers, etc.) included in OJP8500vA909_Full_14 successfully installed.  Someone has suggestions on how to solve this problem of 'uninstall/install' I have with Windows installation package "SolutionCenter"?

  The only other thing I would suggest is uninstalled and your Flash Player reinastalling. Many of our software is Flash based and having a bad plug in for which could cause Solutions Center to fail. Other that that, I agree with you that there is something systemic in your computer that causes the fatal error to occur.

  Let me know and have a great day!

• Cannot install the Solution Center for HP Photosmart C4780 in win 8.1 64 bit

  When I tried to install the full software from HP, the installantion hung an i had to stop. Since then, I get a runtime error:

  Program: C:\Users\(my username)\AppData\Local\Temp\7zS0615\Setup.exe

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.

  I contacted HP support and the technology has been able to help me to install the base of the printer driver, but I can't use the complete featers (scan, for example).
  I tried to use the HP Installer on site, he acknowledged the printer in my network (wifi) and indicated that there was a prolem and I needed to install the complete software, he then download s/w but to try to run it, I got the same error again once. Help someone?

  Thank you!

  Hello

  Try the steps below to uninstall the existing entries to printer and software.

  Note: Make sure that the printer is not connected to the PC by USB.

  1. Press Win + R to open a window to RUN.
  2. in the window RUN, type %temp%
  3. Opens a window of time, and you will see a list of file names starting with 7z...
  4. Open who has the printer name in it, and then look for the name of the folder UTIL > CCC,
  5. then search for uninstall L3.bat and double-click it to run it.

  Once the uninstall is complete, reboot the PC.

  Now run the HP printer Installation Wizard to install the printer s/w.

• Cannot install / upgrade or remove the Lenovo Solution Center

  I am getting error during the installation/upgrade to level or during the withdrawal of the following lenovo Solution Center. I googled for error code & found links with windows install error issue. But my windows install is good work and could be able to install all applications except lenovo Solution Center.

  I tried to delete the directory and to install the most recent copy but still get this error.

  Kindly guide me to remove completely (maybe the registry items to delete) and get the freshly installed.

  

  What is your model number and the type of machine? Your other post indicated that under windows 7.

  Your machine is a recent purchase or did you have some time?  LSC installed properly on your machine in the past?

  You have two (1721 and 1603) error codes:

  (1) [19:00:44:704]: product: Lenovo - Erro 1721 Solution Center

  (2) information 1603. "Land C:\Program Files\Lenovo\Lenovo Solution Center\LSC.exe esta sendo mantido em uso pelo seguinte processo: Nome: LSC, Identificacao: 11196, Titulo da Alana: '(ne pas déterminé encore). Arrow esse aplicativo e Bivvy again.
  MSI (s) (44:50) [19:00:36:711]: 1 requests had been reported to have files in use.

  ===

  Possible solutions:

  (1) unregister/re-register windows install. (I had this problem in the past).

  http://www.ehow.com/how_6384842_fix-1721-Windows-Installer-error.html

  (2) performance Microsoft Mr. Fixit for remnants of an LSC installation/uninstallation are deleted.

  http://Support2.Microsoft.com/mats/program_install_and_uninstall

  (3) not your login has administrative rights? If not,

  start the installation of lsc by rlght click, run as administrator

  (4) you have an installed antivirus program? If so, what are you running?

  Error 1603, FILE in use, among other meanings.

  First try the steps 1 and 2 and see if the problem clears up.  If the errors persist after a new MSI log.

• Lenovo Solution Center cannot connect to the Security Server

  Solution 2.8.005 Lenovo Center review 21092 reports an int guaranteed alert the Support section. Under warranty, a yellow wanring bar reports "Guarantee impossible to get the response from the server guarantee." In addition, an alert about products for registration is also reported in respect of the support. It reads 'Recording product that Lenovo Solution Center could not find your registration information'. These are the only two alerts by the Lenovo Solution Center.

  I finished the registration process. On support.lenovo.com, I can confirm that the Lenovo ThinkPad W520 is registered to me and it is out of warranty. Therefore, it is a defect in the Lenovo Solution Center.

  Is there a way to bypass this flaw, or repair by Lenovo?

  Lenovo released a Service TIP document a problem with Lenovo being unable to search feature security solutions Center.

  It can be found here: https://support.lenovo.com/us/en/documents/HT116724

  The solution is to visit the Web site of warranty directly. It can be found here: http://support.lenovo.com/us/en/warrantylookup

  Thank you

• Important notice - please put Lenovo Solution Center update

  Lenovo has released a new version of the application (LSC) Lenovo Solution Center v2.4.003 which addresses a number of potential problems and bug fixes, some of which could adversely affect the performance of your system.

  (Newer versions can be released since - just follow the link to get the latest version.)  The point of this pinned post is to alert users that you can be stuck on a version that would not automatically update correctly, and we wanted to communicate that number and in the chronology of the version where it is fixed)

  Many of these issues have been discussed elsewhere in this forum.  It is highly recommended for all users upgrade to this new version as soon as possible.

  Some of the problems that it solves understands that:

  • Excessive event log records
  • LSC_CLI.exe crashes
  • Excessive User Account Control (UAC) invites on limited user accounts
  • Many other bug fixes have been implemented

  Most versions of LSC will prompt to update themselves when newer versions are detected.  There was a bug in the version 2.2 which affected the ability of automatic update - it would download and appear to be updated, but could not actually complete the update.  This problem has been corrected in version 2.3 or later, but the customers who have version 2.2 should download and update to fix this problem manually.  In order to be proactive, Lenovo adding the last versions system update catalogs to provide another automated way to update the clients that can still be on version 2.2, but some customers cannot make use of updated system, or may have chosen to not install the LSC if offered updated package.

  Visit LSC on our support site to download the version for your OS or if you have already installed LSC and icon appears in your toolbar, please launch and allow it to check the updates.

  If you go to the link provided by brand, you will always have the last ICL:

  ""Go to the LSC on our support site to download the version for your OS or if you have already installed LSC and the icon appears in your toolbar, please launch and allow it to check the updates. ""

  I hope this helps!

• Update of Y700 Lenovo Solution Center to remove?

  Hello

  I was checking my computer for his weekly inspection, and I noticed that Lenovo Solutions Center program had an update, (seen it opening just the program and a popup came say theres a new update), I clicked update, it did its thing has shown a popup of the installer. He finished and it seemed to remove everything related to the Solutions Center program, cannot even find it now. So...................... WHATS UP WIT DIS? each WAT?

  wmj259 wrote:

  Hello

  I was checking my computer for his weekly inspection, and I noticed that Lenovo Solutions Center program had an update, (seen it opening just the program and a popup came say theres a new update), I clicked update, it did its thing has shown a popup of the installer. He finished and it seemed to remove everything related to the Solutions Center program, cannot even find it now. So...................... WHATS UP WIT DIS? each WAT?

  Did reboot you after the update? If not, I think you should.

• Need older version of Lenovo Solution Center

  In our current environment, that we installed a combined version of the Lenovo Solution Center and I need a different version of this software to install on my test environment, in oreder to test the ITCM uninstall process which is the deployment solution that we use. I need to install and upgrade to the latest version to make sure that none of my users have no problem.

  Can someone point me in the right direction to download the version 1.1 to 2.8 version would be great to have.

  x 64 CSL 2.8.007

  x 86 CSL 2.8.007

  Please use these to test your uninstaller.  They have a security flaw which is fixed in version 3.  This version will provide a pop-up screen to upgrade to version 3.

  Info Security

• Lenovo Solution Center V.3.3.002 update problem

  Hello everyone, today, there was an update for Lenovo Solution Center V.3.3.002 directly from the center of Lenveno of Solution, I did the update and when it's done I got an error message which reads "LSC is unable to run because a required file is missing. Your installation was corrupted. Please reinstall the application and try again "

  I uninstalled and downloaded the update again and he always showed the same error. I ran maintenece and deleted cookies and erased records like I always do in interview on my pc.

  I would really appreciate the help and thank you in advance.

  Here is my info to the computer.

  Desktop Lenovo ThinkCentre M73 10B6001SUS

  Name of the operating system: Microsoft Windows 10 Pro

  Version: 1511 (OS build 10586.318)

  x 64 base pc

  b 10, 6 mt Lenovo

  Intel (r) core (tm) i5-a4590 cpu @ 3.30 GHZ mhz 3301 4core (s) a4 logic pro...

  Version of the BIOS/date Lenovo FCKT70AUS, 23/04/2015

  
  

• Warnings to drivers Lenovo Solution Center

  I installed the Solution Center and it tells me I have 2 drivers that are obsolete. It points me to the Device Manager. When I select Update driver on these I get "you have the latest version" so not sure what is happening between the center of Solution and the Device Manager.

  jonesthecurry wrote:

  Hi, yes it is. I have an Ideapad U410 (should have put that in my post). One is for the USB - IF xHCI Host Controller and the other is for Microsoft Visual Studio location sensor Simulator. Manager device displays them as long as the disabled and pilots are underway. I can't enable them via the Device Manager.

  This is the result on the devices supported by the solution Center:

  

• Photosmart C4780: Cannot load the solution Center since a cΘdΘrom with Windows 10 to scan

  Things worked fine with my old computer running Windows 7. However this computer failed last week, well that was 10 years old, and I bought a new computer with Windows 10.

  He had no problem with the wireless print job immediately. However, I need to have the program loaded in to scan documents. I think that the program is called Center of HP solutions? Despite the CD, I am unable to install the program.

  It presents a panorama of a Mediterranean home fron a gateway with Brown and the message "select install to begin the installation of your new HP device ' however Instrall is not presented as an option only"Exit".".

  I tried the Support Web site without success, everything I can find drivers.

  Help is greatly appreciated.

  Robert

  @RobertinHerts

  You will not find a download link for the HP Solution Center software as part of the full software solution features of your printer.

  Install HP Solution Center with the full Windows software feature of the HP Web site, or use the Printer Wizard.

  HP Photosmart C4700 all-in - One Printer series Full Feature Software and Driver

  http://ftp.HP.com/pub/softlib/software13/COL28119/MP-109702-3/PS_AIO_06_C4700_140_408-5.exe

  HP printer install wizard for Windows

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  You can see this also.

  Your HP printer static IP address assignment

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/1972074076001/assigning-your-HP-printer-a-static-IP-address/video/

  REO

• locations of memory T530 - Lenovo solutions Center

  T530

  Question

  Is the Slot 1 (Lenovo Solution Center) under the keyboard or on the back of the computer?

  What I understand

  I understand that there is a slot memory under the keyboard and the other at the back of the computer.

  --> Lenovo Solution Center program / system / memory it says I have 4 GB in Slot 1 / 2 Slot is empty

  Thanks in advance for any help.

  LarryJoeRay

  Slot 1 is under the keyboard

• Problems to install the Solution Center

  HP Photosmart C6380, later Center of HP solutions web site lists as compatible Windows 8.1.

  408 PS_AIO_4_C6380_NET_FULL_WIN_WW_140_: this file will not be installed Solution Center, only drivers, even though it claims to have installed all the software.

  Is there a way I can get the software suite to a .iso file so I can burn my own installation disc? Then I might be able to navigate the disc and try to install the Solution Center in itself.

  Thank you

  Dave

  Hi Dave49,

  I'm sorry to hear that the final stages has not solved the problem. The next step would be to complete an uninstall of level 3. I've included the steps below for you.

  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  4. open the file 7z
  5 open the util folder
  6 open the folder of the ccc
  7. double-click on the Uninstall_L3

  Once the uninstall is complete, you will need to empty the temp folder. To do this simply follow the steps,
  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  Once you are in the temp folder, you can remove all entries listed. Note that not all entries will be deleted, because some programs are open. For these entries, you can click on ignore. Next, you need to empty the trash. After the Recycle Bin has been emptied, you will have to perform a clean boot. I've included the document "How to perform a boot in Windows". If your computer does not request it, restart your computer.

  Once restart is completed, you will need to download and install the software again. I have included a link to the ' all-in-one HP Photosmart C6300/6324 Printer series full feature software and driver '.

  Please let me know if you are successfully able to install all software.