HP CD/DVD RAM GH60L

Similar Questions

• G5210it: hp dvd - ram gh60l not visible in windows 10

  Hello

  problem: dvd unit does not; It is not visible in computing resources

  This happens after the update from windows 7 to windows 10

  -the dvd is in the BIOS: described as hp dvd - ram gh60l

  -It is provided: it opens and closes correctly using its button

  -It is not visible in the resources of the computer

  -It is not visible in the list of devices, even if I show hidden devices (devmgr_show_nonpresent_devices = 1)

  -J' downloaded and installed the HP driver, even if it's for windows 7

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_100477_2&swEnvOid=4054

  -J' checked the 4D36E965-E325-11CE-BFC1-08002BE10318 low register - and upperfilter: never show

  so my questions are:

  can it work with windows 10?

  any clue?

  Thank you

  Hello!

  I had exactly the same problem. For me it worked with "Resolution 5" in support of Microsofts bullentine https://support.microsoft.com/en-us/kb/314060.

• DVD-RAM GH60L CODE 39

  I HAVE A PC HP COMPAQ CQ3495AN, PURCHASED ON 01/08/2011. I NOTICED THAT THE DVD PLAYER IS NOT WORKING. WHEN THE ACTIVE DEVICE MANAGER IT SAYS DRIVER MAY BE CORRUPTED OR MISSING CODE 39 (HP DVD-RAM GH60L). TRIED THE UPDATE DRIVERS AND UNISTALLING TO NO JOY.

  Description CD-ROM drive
  Loaded media no.
  UNKNOWN media type
  The name HUAWEI Mass storage USB Device
  Manufacturer (Standard CD-ROM drives)
  State error
  Transfer rates 36000.00 KB/sec
  SCSI target ID is not available
  PNP ID of device USBSTOR\CDROM & VEN_HUAWEI & PROD_MASS_STORAGE & REV_FFFF\8 & 17D52EA1 & 0 & 1234567890ABCDEF & 0
   
  No available drive
  Description CD-ROM drive
  Loaded media no.
  UNKNOWN media type
  Name hp DVD-RAM GH60L
  Manufacturer (Standard CD-ROM drives)
  State error
  Transfer rates 0.00 KB/sec
  SCSI target ID is not available
  IDE\CDROMHP_DVD-RAM_GH60L___RD01___\4&BD10ABE&0&0.1.0 PNP device ID

  DOES THAT MEAN SOMETHING TO SOMEONE, PLEASE.

  THANKS BOB

  Hello

  Please try to fix:

  http://www.ehow.com/how_4693117_dvd-Device-Manager-error-codes.html

  Good luck.

• My hp DVD-RAM GH60L ATA Device receives an error Code 10. How can I fix it?

  My hp DVD-RAM GH60L ATA Device driver receives an error Code 10. (This device can not start..)

  I fact troubleshooting, uninstalling, looking for changes, then install (but didn't), I disabled and then enabled... Nothing seems to work.
  I checked if my driver needs an update. It is being updated.

  I use a Windows 7 Home Basic, 32-bit.

  Any other ideas on how I could solve this problem? Please and thank you! :-)

  This problem occurred after you update or install something?

  Have you tried the fixit of base?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• DVD - RAM on Satellite M70 cannot read all CD

  Hello..

  I have satellite M70-215, and I have a problem with the DVD - RAM drive... it's my dvd - ram does not correctly read the CDs... some of them can be read and some of them may not... when I put a CD that leans on another computer, I was 'incorrect function', ' device can not available "errors... or I see an audio CD instead of data cd... but on the other side, some of my CDs work wihtout problems... I did everything (remove driver and install again etc.) to solve the problem but I could not find the answer... This is my second toshiba laptop and now I have the same problem again... What's wrong with this DVD - RAM drive? I hope you can help me because I got bored with that...

  thnx now...

  Ali Mert Türkkan
  Med.Dent.

  The problem could be the driver lens calibration.
  Before the player will read or write to the media of the lens must be calibrated in the right position, but if the drive has been used long-term these problems appear

  Sometimes the lens cleaning helps, but especially the disk needs to be replaced

• DVD-RAM UJ862AS does not recognize discs-r on Satellite U400

  For some reason any my DVD player wil no longer recognizes discs - R.
  I have a RUG * has DVD-RAM UJ862AS by car.

  Clues?

  Hello

  Try to clean the laser lens with cotton and alcohol tip.
  In my case it worked also try different drive R from different manufacturers. I use the TDK R CDs and DVDs and hand never no trouble.

• Satellite Pro U200: DVD - RAM cannot read media

  Greetings

  I have a problem with a carpet * a DVD-RAM UJ 8425 in my notebook U200.
  When I insert the CD or DVD in the engine, it cannot read the media.
  The engine starts and runs disc twice or three times, then turn of.

  I have this laptop for 2 months, and only since yesterday, I have this problem.
  In Device Manager it is shown in working order,
  I have change the driver but it's still doesn't work...

  Can you help me to find out where is the problem?

  Hello

  It will be interesting to know does this happen with all sorts of data on the disks. Try checking Autoplay options in the ODD properties.

  By the way: you can see the contents of the disc in Windows Explorer?

• Portege A600 - need driver for MAST * A DVD-RAM UJ 862AS

  Please, where can I find the driver for:

  CARPET * A DVD-RAM UJ 862AS

  Thank you in advance.

  Sabre - Italy

  Hello

  Why do you ask for it? The drive is not visible?

  I mean that the driver is not required for ODD (optical disc).
  Windows uses the Microsoft own driver who is still part of the Windows System.

  You see a yellow exclamation point in Device Manager?
  I recommend the removal of the STRANGE in Device Manager. Then, you will have access to the registry and should remove the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, you have to restart the device.

  Check and I think that the STRANGE should reappear.

• Carpet * a DVD - RAM UJ-811 drive

  Laptop: Satellite A10-S703
  Carpet * a DVD - RAM UJ-811 drive supports 2 x DVD-R burning.

  The minimum speed of blank media DVD-R available on the market is 4 x.

  A warning on the cover of Imation DVD - R 4 x recordable disks says
  "Download the free firmware required to avoid damaging your Player 2 x" the given url is http://www.imation.com/products/dvd_media/dvd_firmware.html

  The links provided under Toshiba / Panasonic are not useful.

  Can someone guide me if I can burn 4 x media on this drive?

  Thanks in advance!

  Hi Ravi,

  If you have the DVD burner that can burn DVD-R with a speed x 2 there is no way to improve the speed of burning at 4 x speed.

  Some firmware updates of aid to enable support for new media and has increased by a few burning questions (results of optimal registration for your reader).

  Good bye

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• A50 DVD-RAM drive problem

  Hello
  When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
  The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

  I think the update of the firmware should fix it, but I can't find it anywhere.

  Adrian

  Hi Ado,

  Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

  Rudi Bye

• Carpet * a DVD-RAM UJ-820 s does not work in Satellite M30X 122

  Hello!

  I am owner of a Satellite M30X - 122 Notebook with Mat * one reader CD DVD-RAM UJ-820 s.

  In recent weeks the disc suddenly stops working during normal use, no error message, in Windows XP System Device Manager all entries are ok, the drive is enabled and visible.
  !! Optical media access LED lites permanently, so that the reader is always available!
  I have tried using different CD, reboot Notebook, removing battery State is always the same, LED blinks several times then it lites permanent.
  After a few hours this phenomenon disapperars and I can use the drive without any problems. ! It is very annoying!

  Someone at - it experience with this problem? Please let me know.

  Don't you think that the drive needs to be replaced?
  In this case (I tried a Mat * a DVD - RAM UJ-820 s on the www, I found none just renovated, new readers) does anyone know where to get a new, or a compatible UJ-820 s drive.

  Thanks in advance.
  Have a good evening.

  Hello

  I don't know where you live and can not recommend any PC shop but you can order it by the authorized service partner.

  You can also view s manuals for Satellite M30X, and page 5, you will find a list of all compatible optical disk drives. Do not buy the same but much better if you want. I hope that this info will help you find the new drive.

  Troubleshooting I can't say a lot. Try to remove the device from Device Manager and reboot the device and test again but with original media only. Make sure that you can see the contents of the CD or DVD using Windows Explorer.

  If nothing is done check for replacement.

• M30X-105 - my DVD-RAM can't see CD - R.

  Hi all

  Yesterday, I bought a Toshiba Satellite M30X 105. Everything is ok, aside from the fact that Mat * a DVD - RAM UJ-820 s refuses to read one of my CD - R is recorded on another machine with Nero 6.6.xx

  Can someone everything I say on what settings can I change to enable DVD-RAM see all CD?

  HI JAI,

  What type of CD writer is in the other machine?

  He is also an older CD burner or a DVD burner?

  Pete Bye

• Satellite L10: Mat * a DVD - RAM UJ - 831 S - update the driver or firmware

  Hello
  I bought a Toshiba Satellite L10-194 with a carpet * a DVD - RAM UJ-831 S and I'd like to update. My driver version is 5.1.2535.0 Microsoft (07/01/2001). I have a game I want to install it on my laptop but the CD doesn't recognize is not my DVD-RAM and its freezing point. I also want to know the rate of transfer of this DVD-RAM.
  Thank you

  Hello Daoude

  In my opinion, you have a bad driver. You can find the most recent version of the driver from the official website of Toshiba. The version of the driver for windows xp is 3.1.0.0 (last updated 02/03/05).

  Good bye

• Satellite Pro L510 - computer laptop Toshiba DVD - RAM cannot read disks

  My laptop toshiba Satellite Pro L510 computer may not play all discs as I installed Microsoft Expression Studio 4 by using the original CD... now whenever I insert a disc, the dvd - ram turns the disc for a few seconds and thn stops spinnig.

  Then drive shows that there is nothing inside the disk and it is completely empty.

  I can't even restart my operating system discs cannot be read from the bios either.
  I uninstalled the drive, the updated drivers, but it did not help. Please help me, I really need to use dvd ram... I use windows xp sp2 and using the laptop for 8-9 months...

  Help, please!

  http://www.Microsoft.com/UK/expression/products/StudioUltimate_SysRequirements.aspx
  According to this statement you must have installed Windows XP SP3 home edition.

  Your ad is a bit confusing to me. You have a problem with the functionality of DVD - RAM or optical disc drive cannot read all drives (different CD, DVD, DVD - R formats. DVD + R and so on)?

  I put t know what is the problem with the optical disc drive, but way generally, an installation of software packages has nothing to do with ODD when you use it as first boot device.
  > I can not even restart my operating system discs cannot be read from the BIOS either.
  Restart or reinstall?
  Is a readable recovery DVDs when you try to start the recovery image installation?