DVD-RAM GH60L CODE 39

Similar Questions

• My hp DVD-RAM GH60L ATA Device receives an error Code 10. How can I fix it?

  My hp DVD-RAM GH60L ATA Device driver receives an error Code 10. (This device can not start..)

  I fact troubleshooting, uninstalling, looking for changes, then install (but didn't), I disabled and then enabled... Nothing seems to work.
  I checked if my driver needs an update. It is being updated.

  I use a Windows 7 Home Basic, 32-bit.

  Any other ideas on how I could solve this problem? Please and thank you! :-)

  This problem occurred after you update or install something?

  Have you tried the fixit of base?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• G5210it: hp dvd - ram gh60l not visible in windows 10

  Hello

  problem: dvd unit does not; It is not visible in computing resources

  This happens after the update from windows 7 to windows 10

  -the dvd is in the BIOS: described as hp dvd - ram gh60l

  -It is provided: it opens and closes correctly using its button

  -It is not visible in the resources of the computer

  -It is not visible in the list of devices, even if I show hidden devices (devmgr_show_nonpresent_devices = 1)

  -J' downloaded and installed the HP driver, even if it's for windows 7

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_100477_2&swEnvOid=4054

  -J' checked the 4D36E965-E325-11CE-BFC1-08002BE10318 low register - and upperfilter: never show

  so my questions are:

  can it work with windows 10?

  any clue?

  Thank you

  Hello!

  I had exactly the same problem. For me it worked with "Resolution 5" in support of Microsofts bullentine https://support.microsoft.com/en-us/kb/314060.

• HP CD/DVD RAM GH60L

  DVD player not working not not error 39

  Hello:

  Try the steps in resolution on the link below.

  I would use resolution 2 first.

  http://support.Microsoft.com/kb/314060/en-us

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Question about area with a rug code * a DVD-RAM UJ - 841 S

  Hello!
  I have a Toshiba Satellite with a CARPET * a DVD-RAM UJ - 841S. Someone knows something about the firmware for this? I tried to use dvd43 and VideoLAN, but it does not work properly!

  I guess you do you want to Flash the firmware to remove the region code of the DVD player.
  Am I wrong?
  Don t do it! It risky s.
  If you update the drive with the wrong firmware or is not compatible the drive is not able to read/write to the media; CD and DVD.
  In addition, the use of the incorrect firmware will avoid the reorganization of the training by the BIOS.

• problem HP dvd ram uj8c2 13 code

  I have a dvd ram with an exclamation point in Device Manager that won't play DVD.

  The problem code is 13.

  Gear update drivers (gearaspiwdm.sys) gear Web site. http://www.GearSoftware.com/support/drivers.php

  DVD player works now.

• HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

  The other post:

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

  I suggest to return the item and try to run the fix it and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know if it helps.

• This device cannot start. (Code 10). Matshita DVD-RAM UJ-850 s ATA device not found.

  The operating system does not detect the Matshita DVD-RAM UJ-850 s ATA device on my Toshiba Satellite. I tried Microsoft Auto difficulty and it didn't fix it. The CD player worked last week when I installed ITunes software. Now, the driver cannot be detected. Known corrections or suggestions?

  You must uninstall, then reboot and let the program installation is the device when it restarts. If the correct drivers are found, it will install. In case of failure, it's probably because Search Setup default is files of the user and not the C:\windows\inf or directories c:\windows\system32\drivers\, which you can specify by choosing to install from a list or specific location, and then by typing or by going to the it. If this fails, check the bios settings.  But most likely your original driver was silently replaced, by a program system file or a third-party application. If need be, you can try a system restore to return the parameters of your system to a point in time where everything worked. I would try one more point to restore and not a newer version, preferably a restore point launched machine, not one caused by installing or removing a program or a driver. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• E300 satellite - DVD Ram drive does not work with Win 8

  Hello

  I get an error message on my dvd - ram drive - Mat * un UJ8A0AS DVD-RAM

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I tried the solution of Microsoft Web site for this problem, but it did not work.

  Is someone able to recommend a fix for this problem. Tried to uninstall and reinstall the device without result.

  Have you tried to remove the device from Device Manager and reboot the laptop?
  After reboot of the device will be recognized and installed again.
  Please, do it and see if the problem still occurs.

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• problem HP DVD RAM UJ892

  Product name : HP Pavilion dm4 Notebook PC (1204TU)

  OS : Windows 7 Ultimate 32 bit Service Pack 1

  Problem :

  HP DVD RAM UJ892

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• After recovery installation DVD-RAM has dissappeared since 'my computer' - P100

  Hello everyone

  After that I used my CD to recover my DVD-RAM has simply disappeared from "my computer" and in device in the Properties Manager it gives me that it could not load the driver for this hardware because it is missing or damaged (code 39).

  If anyone knows how to fix this I would really appreciate it.
  Thanks in advance

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  It is a beautiful subject with the solution ;)

• Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)

  Hi all
  I have a Satellite M55-S325 with MAT * A DVD - RAM UJ-years 840 Firmware Version 1.52 I bought States 5 months ago, everything seemed fine until a few weeks ago when I tried to write some data DVD, I had unrecoverable errors while writing the DVD using NERO 7 ULTRA EDITION, but now I get this messege all the time and I'm not able to write any DVD the disc seems to be well in CD writing. I tried to use recording SOUND now that comes with the laptop, no luck. I tried to reduce the size of the files, and try with lower write speeds but still no luck. I disabled burning CD of the Windows XP SP2 IMAPI burning service COM as well. I use a good quality DVD-R that worked fine before. I would appreciate your help because my HDD is almost full (but still 10 GB of free space) and I need to get a backup of my data.
  Here is the log of my last attempt in writing, file a NERO DVD:

  1C82-0010-8011-0000-1454-2737-5268

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

  NT-SPTI used
  Nero Version: 7.0.1.2
  Internal Version: 7, 0, 1, 2

  Recorder: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK1032GAX atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD - RAM UJ-years 840 atapi Port 1 ID 0 DMA: on

  = CDRom-Device-map =.
  CARPET * a DVD - RAM UJ-years 840 D: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 73400320 (0) bytes
  ShowDrvBufStat: 1
  BUFE: 0
  Physical memory: 502 MB (514480 KB)
  Free physical memory: 160MO (164772kB)
  Memory in use: 67%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  14.5.2006
  Compilation ISO
  15:18:55 #1 text 0 file Isodoc.cpp, line 6411
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: DAO
  Mode : 1
  : ISO 2 (31 characters)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  15:18:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
  ReadBuffer-Pipe got 262144KB of memory

  15:18:55 #3 text 0 file Reader.cpp, line 124
  Player running

  15:18:55 #4 text 0 file Writer.cpp, line 113
  Writer D: MAST * A DVD - RAM UJ-race years 840

  15:18:55 ISO9660GEN #5-11 file Geniso.cpp, line 3312
  First address writeable = 0 (0x00000000)

  15:18:56 #6 text 0 file Burncd.cpp, line 3302
  Turn on Disc-At-Once, using DVD media

  15:18:56 #7 Text 0 File DlgWaitCD.cpp, line 279
  Last possible write address on media: 2295103 (510:01.28, 4482 MB)
  Last address to be written: 2288159 (508:28.59, 4469 MB)

  15:18:56 #8 Text 0 File DlgWaitCD.cpp, line 291
  Write in overburning mode: No. (enabled: CD)

  15:18:56 #9 Text 0 File DlgWaitCD.cpp, line 2578
  Recorder: MAT * a DVD - RAM UJ-years 840, media type: DVD + R
  Disc manufacturer ID: MBIPG101, media Type of ID: R04, product revision number: 1
  Disc Application code: 0, extended information indicators: 3

  15:18:56 #10 Text 0 File DlgWaitCD.cpp, line 458
  > Protocol of DlgWaitCD activities:
  =========================================

  15:18:56 #11 text 0 file ThreadedTransferInterface.cpp, line 847
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2288160 (2288160) original disc POS = #2288160 / 508:28.60
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288160 blocks [D: MAST * a DVD - RAM UJ-years 840]
  --------------------------------------------------------------

  15:18:56 #12 text 0 file ThreadedTransferInterface.cpp, line 1059
  Prepare recorder [D: MAST * a DVD - RAM UJ-years 840] for write in CUE-sheet-DAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 0 4686151680, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
  0 | Lead-in | 0 | 0x41. 0x00
  0 | 1. 0 | 0x41. 0x00
  0 | 1. 1. 0x41. 0x00
  2288160 | Lead-out | 1. 0x41. 0x00

  15:18:56 #13 text 0 file SCSIPassThrough.cpp, line 36
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  15:18:56 #14 phase 24 file dlgbrnst.cpp, line 1725
  Caching of files started

  15:18:56 #15 text 0 file Burncd.cpp, line 4132
  Cache writing successful.

  15:18:56 #16 phase 25 file dlgbrnst.cpp, line 1725
  Caching of files completed

  15:18:56 #17 phase 36 file dlgbrnst.cpp, line 1725
  Burn process started at 8 x (11 080 KB/s)

  15:18:56 #18 text 0 file ThreadedTransferInterface.cpp, line 2685
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  15:18:56 #19 text 0 file Cdrdrv.cpp, line 8411
  -A DVD structure: physical Format information (00 h).
  Layer: 0, address: 0 (0 h), AGID: 0; Length: 2050
  Book type: DVD + R (10), part Version: 1.0 x (1)
  Disc size: 120 mm, maximum speed: (h F)
  Number of layers: 1, track path: path of the parallel runway (PTP), layer Type: recordable
  Linear mass: 0,267 um/bit, track density: 0.74 um/track
  Starting the number of physical sector of data area: 30000 h (DVD-ROM, DVD-R /-RW, DVD + R / + RW)
  End number of physical sector of data area: 26053F h
  End sector number in layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
  There is no data in Burst cutting area (BCA)
  Disc Application code: 0 / 0 h
  Scope of Information indicators: 3 h
  Disc manufacturer ID: MBIPG101
  Media type ID: R04
  Product revision number: 1
  Number of bytes to use physical format information in ADIP up to byte 63:56
  Particular media [16.63]:
  00 00 03 4 42 49 50 47 - 31 30 31 52 30 34 01 38... MBIPG101R04.8
  23 54 37 12 02 42 6 02 - A8 6 B 15 15 0 B 0 B 08 08 #T7. BN... k...
  01-19-1 B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00...

  15:18:56 #20 text 0 file DVDPlusRW.cpp, line 666
  Begin to write his address to the LBA 0
  Mode high compatibility DVD: Yes

  15:20:47 #21 SPTI-1128 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1128)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x11
  Meaning of Qual: 0x00
  The CDB data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
  Sense area: 0xF1 00 03 00 00 00 00 0 a 00 00 00 00 11
  Buffer x05e50000: Len x 10000
  0 X 40 86 AB A0 6 B 93 01 4F 75 2 A 54 25 B7 F6 D3 E5
  0XA9 FC 97 DF 55 73 64 2 AA AF 96 7 D B8 4 C 7 C 66
  0XC1 9TH C1 FF FF 55 59 DB 08 65 CB 6 CA B9 0C HAS 2 B

  15:20:47 am #22 RDC-1128 file Writer.cpp, line 302
  Unrecoverable read error
  D: MAST * A DVD - RAM UJ-YEARS 840

  15:20:47 #23 text 0 file ThreadedTransfer.cpp, line 228
  all writers idle, stopping conversion

  15:20:54 #24 text 0 file ThreadedTransfer.cpp, line 222
  conversion idle, stopping reader

  15:20:57 #25 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #26 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #27 phase 127 file dlgbrnst.cpp, line 1725
  Generating borders high compatibility DVD

  15:20:57 #28 phase 129 file dlgbrnst.cpp, line 1725
  Production DVD borders completed successfully

  15:20:57 #29 phase 38 file dlgbrnst.cpp, line 1725
  Burn process failed at 8 x (11 080 KB/s)

  Existing drivers:
  File ' Drivers\CDRALW2K. SYS: Ver = 6.2.0.132, size = 24698 bytes, created 23/10/2003 04:15:02
  File ' Drivers\PXHELP20. SYS: Ver = 2.03.28a, size = 20640 bytes, created 05/31/2005 23:36:01 (Prassi/Veritas driver for win 2 K)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Hello

  I can't find any strange or mysterious messages in the log file.
  You suggested that the drive can burn CDs but not DVDs.
  The calibration lens dysfunction is sometimes responsible for these issues.
  Unfortunately, I have no solution for this problem. The replacement drive must resolve.
  The unit is fairly new in this case, you should ask for help ASP.