Printer Drivers MP - connection failed - Canon Pixma MG2570 on Win 8/64 OS and OS Win 7/64

Similar Questions

• Unable to connect w / Canon Pixma MX860 printer now I ElCapitan.  Need to print today... any suggestions?

  Just upgraded to El Capitan and now cannot connect with Canon PIxma 860 and not financially able to buy a new printer... no workaround solution suggested?  Canon has written is not compatible with El Capitan.  I have to get off at Yosemite?  Thank you.

  http://GIMP-print.sourceforge.NET/MacOSX.php

  This link should make your printer work again.

  That said, I've not heard of Captan El is not not compatible. But this fix should work.

• Connect the canon PIXMA MG7120 for Mac

  Problem: Cannot connect computer and a canon PIXMA MG7120 printer

  Have it hard cable with a USB cable.

  Did all the set up with the printer.

  Have updated firmware today.

  I have not had any problems with the initial installation.  Close this printer for a few months and returned to

  working here, but failed to get a connection between iMac laptop computer and printer PIXMA MG7120

  Help, please!

  Two of these printers are in different places.

  Use the same computer at both locations.

  Suggestions?

  Hi bethbishop,

  We can reset the printer on your Mac and then reinstall the printer using the latest drivers on the Canon USA site to try to get the printer connected to your computer.  To do this, please follow these steps:

  1. go on the icon of your Apple in the upper left corner of your screen.

  2. click on System Preferences.

  3. click on Print & Fax

  4. right click your printer on the left, then select "reset printing system".  Note: If the right click does not work, press and hold the control key on your keyboard and then click the mouse button.

  5. If your printer is still on the left select your printer, and then click the minus (-) button to remove it.

  6. restart your Mac.

  Then please click here to access the page PIXMA MG7120 drivers and software.  Once on the page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, please, click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the DRIVERS AND PACKAGE of SOFTWARE FULL file.  When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once the file is downloaded, please double-click it to install all the printer drivers and software on your Mac.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• Cannot print 13 X 19 on Canon Pixma Pro 100 - 10.9.5 - Photoshop CS6

  MAC OS X: 10.9.5 (Mavericks)

  Photoshop CS6 Extended

  Hello

  Lost about two hours trying to figure how to print 13 X 19 from Photoshop CS6. After noticing that the option A3 + not appearing is not on cheking the prinnt options, I've read that I should use the Print Studio Pro plugin. When I try to use the plugin pro printing studio I get this error:

  "a printer supported by this software is not found. Connect the printer supported by this software, and then install its driver. Pro printing Studio output. »

  Ridicule of Wat is I use the printer and it works for all kinds of impressions, so it IS installed. What am I supposed to do? I have a huge batch of paper 13 X 19 Canon semi-Gloss Photo that I can't use.

  to my knowledge, I have all the drivers installed. Any help would be grateful. Thank you in advance.

  -GIo

  Two suggestions:

  Download and install the latest version of Print Studio Pro.

  If you use the WiFi printer make sure that you have added the IJ network printer and not the printer Hello.

• Hisense c11: connect my canon pixma mg2520 to my os of chromebook hisense

  How can I connect my printer to this

  Just to let you know, this is the printer HP Forum, not Canon. For your question, contact the good folks at Canon.

• Canon PIXMA MP280 cannot connect

  * - Original title - Canon PIXMA MP280 cannot connect, tried to uninstall troubleshooting 2 times did nothing is useful, is it someone help me?

  Canon PIXMA MP280 cannot connect, tried to uninstall troubleshooting 2 times did nothing is useful, is it someone help me?

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. What is the full error message you get while trying to connect to the printer?

  4. What are all the steps you've tried?

  5. have you installed the printer drivers after connecting the printer to the computer?

  6. did you uninstall the printer software or the driver?

  I suggest you follow this article.

  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  For reference:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• Canon Pixma MG6250 - CD printing (plate G)

  Background

  I'm running an iMac with 10.6.8.

  Adobe Illustrator 14.0.0 (CS4)

  My previous printer was a HP C5380. Print directly on CD from Adobe Illustrator was not easy. Design the layout, select print and choose "CD" paper size. Fact. The necessary replacement HP and HP have most any printer with CD printing capability.m

  New printer

  I got the Canon Pixma MG6250 and normal printing as it should. This printer has a small plateau (called 'Bin G') that you place the CD on and then insert the tray in a slot (inside the slot of the main paper), this slot is accessible via a drop down "inner cover" you need to manually open. Then you place the tray (with the CD on this subject) in this slot and two white arrows align. The printer must then pull this tray inside and print. (It was how the HP printer works too)

  Problem

  When I select "File - print" in Adobe Illustrator, I then select 'Media' and the option 'disk tray G '. I have selected this option, click 'print '.

  The printer displays an error saying "Inner cover open. Close the inner cover and select OK"

  When I do that I get a second error message saying "tray back. There is no paper. "Load paper and click OK"

  If I don't have a paper in the rear tray, the image I want to print on the CD, prints on the paper (that you expect the sequence of messages)

  Does anyone have a solution to this problem? It makes me crazy...

  Concerning

  John

  I have one of these printers as well: you must use the Canon software to print on CD. write a PDF file first, and then print it with the Canon software.

  You should complain to Canon if you don't like that.

• CANON PIXMA MP160

  I just bought a new desktop PC HP S5 - 1435D.

  Have connected the Canon PIXMA MP160, but cannot print documents.

  I just bought a new desktop PC HP S5 - 1435D.

  Have connected the Canon PIXMA MP160, but cannot print documents.

  Hello

  Hello

  Step 1: Check with the manufacturer for the latest Windows drivers for the device.

  Canon USA: Support & drivers: PIXMA MP160 #DriversAndSoftware:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp160#DriversAndSoftware

  In the drivers and software section, use the drop down menus to select your operating system and version.

  Expand the menu to link drivers and installation instructions, see the download.

  Step 2: If Canon does not have Windows 8 drivers available for this model, check the drivers that are available for previous versions of Windows.

  If these documents are available, install the driver in Compatibility Mode.

  1. download the driver for the previous version and place it on your desktop.

  2. right click the driver installation file and select Properties / Compatibility tab.

  3. place a checkmark in run this program in compatibility mode for.

  4. in the drop-down menu, Select the previous version of Windows.

  5. click apply / OK.

  6. right click the Setup file and select run as administrator .

  Step 3: If none of this does not work, check with the support of Canon or the support forums of Canon for people who may have found a solution.

  Canon U.S.A. - Support Contact:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon user Support Forums:
  http://forums.USA.Canon.com/

  Concerning

• Problem with Windows 7 Canon Pixma MX870.

  Original title: my PC woes

  I had to re - install my Canon Pixma MX870 after a complete reinstallation of a computer. I've never had any problems. I use Windows 7 Ultimate. Everything went according to plan. Successful installation, drivers - updated, then went to print and nothing - message in the printing of the error box.

  I can't restore anything to an earlier time, as I said it's a full system reinstall. Can anyone help

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon.

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MX870 - software and drivers<- select="" your="" version="" of="">
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx870#DriversAndSoftware

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Their impression of Lightroom 4 for Canon Pixma Pro 9000 MK II

  I tried to print from Lightroom to a Canon Pixma Pro 9000 MK II 4.   Every time I try to print via try it before (to the canvas), I get an error message (code 1281) and I can't print.   I tried a few different papers as canvas and give them the same error code.

  I also tried printing from Elements 9 with the same problem.

  I can print via try it before using the own Canon, Easy Print Pro software, but I can't soft proof of the image first, and can't do the correct image size or the other.

  Anyone have an idea how I can get around this problem?

  I spoke to Canon, and they passed the ball saying that I can print using their software, it is a question of Adobe.

  Printer: Canon Pixma Pro 9000 MKII

  Software: Adobe Lightroom 4

  Operating system: OSX Lion

  Thanks for your help.

  Finally managed to get my image printed on canvas.

• Hello, nice folks. You know this printer drivers? Can U help me?

  I have a laser printer that its desitinity has the trash.

  I think that it is not working properly

  But I have a problem

  It does not work with my operating system, WINDOWS 7 HOME PREMIUM, (THAT I CONSIDERED THE BEST performance of O.S. my MICROSOFT, I do not know the 10ª)

  The name of descripction of this laser printer is

  BROTHER HL-2030 series

  Ill be very happy if I meet a beautiful soul in the wild from the cibernetic and, overall, the real world!

  Thank you so much for reading this message.

  Antonio bullets

  Madrid, Spain

  España

  my email address is:

  E-mail address is removed from the privacy *.

  Goodbye, have a nice day for all the people, people, friend of miseries, trouble a lot with the world of computing here!

  Its a shame that its finished

  today's happy time

  Hungry, that we'll come back...

  with more than enterteinment

  PORKY, PORKY

  Our King!

  &&&&&

  Ufff, a bad, very bad translation

  It's my English falks

  Personal information deleted by the moderator. Please see the Community Microsoft frequently asked Questions for more information on how you can protect your privacy.* *.

  Hello

  Check with the support of brother, their documentation online and drivers. As the brother of OEM
  is responsible for the good operation of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  The HL-2030 is a printer from UK, so here are the links for her brother UK.

  Brother - Support
  http://support.brother.com/g/b/producttop.aspx?c=GB&lang=en&prod=hl2030_all

  Brother - Download graphics driver
  http://support.brother.com/g/b/downloadtop.aspx?c=GB&lang=en&prod=hl2030_all

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error code 0X800F0246 when installing printer drivers.

  Original title: error code 800F0246 on the installation of update

  I'm trying to install the driver for my printer Samsung ML-1860 and get an error code 800F0246.  I also tried to install a driver for the Samsung CPL-315 and it would not install either

  Hello
   
  (1) were there any changes to the computer before the question?
  (2) what exactly happens when you try to install the CLP-315?
  (3) is the model number of the second printer you are trying to install Samsung CLP-315?
   
   
  See the methods mentioned below and check if that helps.
  
  Method 1:
  Clean boot the computer and try to install the printer drivers
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following step 7 of the above mentioned link.

  You can download drivers from the link below and check if it helps.
   
  ML-1860 monochrome Laser printer
  http://www.Samsung.com/ie/support/model/ml-1860/XEU-downloads
  
  Printer Laser Color CLP-315
  http://www.Samsung.com/us/support/owners/product/CLP-315/XAA
   
  Steps to download and install the printer driver.
  a. click on the above links and select downloads.
  b. Select the driver from the drop-down and select the universal print driver for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) in the case of Mono Laser Printer ML-1860
   
  c. Select the driver from the drop-down and select Print Driver (Driver) for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) of Printer Laser Color CLP-315.
   
  (d) download and install the driver and check if it helps.
   
  You can also download the drivers via Windows update, see the link below
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

   

  Method 2:
  You can contact Samsung support to get help by following these links:
   
  http://www.Samsung.com/ie/support/model/ml-1860/XEU
   
  http://www.Samsung.com/us/support/owners/product/CLP-315/XAA
   
  Click on the above link and click Overview and on the right side of the screen, you can find support options.
   
  Hope this information is useful.

• BlackBerry Smartphones Bluetooth connection failed

  HYA everyone,.

  I want to send something from an old phone to my blackberry, but every time I try it says connection failed... Bluetooth is turned on etc and I can actually send things from my blackberry to other phones but not vice versa.

  Can someone help me?

  

  Your old device has Bluetooth? In my experiences Bluetooth is all or nothing with the old devices and BlackBerry

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• My new HP Pavilion Desktop PC has no option for my old Canon Pixma iP 2600 printer usb connection

  Greetings:

  I can locate is no longer the installation disc for my my old Canon Pixma iP 2600 printer.  I am able to install it w / add it as a printer in the Control Panel, but the Office feature fails to read that the printer is connected via the usb cord.  I'm not find no possibility to install it as a usb printer.  Please help as soon as possible.  I can't afford to replace the printer and I have several documents that I need to print today or early tomorrow, or there will be dire financial complications for me.  I NEVER had that problem w/Dell.  (the operating system is windows 7, which is exactly what I was running on my old dell model - I searched this forum and find a similar question, but that the consultant has been able to find a usb option in the drop down menu to the port facility.)  that option is absent in my attempts).

  Thank you!

  Interestingly, I discovered (after wasting a ton of time online and on the phone w/less useful HP tech) that the problem was in the two faulty usb ports on the front of this new processor.  at this point, I plan to return to the model of costco and return to dell.  Thank you for your help.