HP Color LaserJet CP3505: Old Cp3505x with 68 FULL PERMANENT STORAGE

Similar Questions

• Why I can't get my HP Color Laserjet cp3505 printer work with windows 7

  I have installed & uninstalled my HP Color Laser jet several times and I can't the printer to print. The driver installs correctly and shows the printer but when I try to print a test page, a dialog box appears and tells Test print has not so another dialog box asks me if I want install a driver I select Yes, and then a third box wrote a program has an important message when I click on Yes to see it try to install something then tells me it cannot find the files Setup for the SQL Server database. I also can't Help MS at work I went "through diagnosis and he can't find the problem." the printer works well on my windows xp machine

  This could give a try.
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• Color LaserJet 1600: print error for Color LaserJet 1600 not solved with troubleshooting or relocation attempt

  I get an 'impression' error when trying to print any document. Have used the convenience store, who said that a print job has been blocked and that the authorized troubleshooter. Second attempt, same result. Attempt to uninstall printer but had received "implemented encountered abnormal program execution. Implementation will stop. "The next window: your printer may have been incorrectly installed, try to reinstall with the recommended settings. Got it but no change. Try "add/repair" printer with no solution. INFO: Color LaserJet 1600, PN # CB373A, Windows 7 Home Premium

  Hi Brenda6,

  When you reinstall the printer helps reinstall you by plugging the USB of the computer? Or are you downloading from the HP site? I recommend that you disconnect the printer from your computer by unplugging the USB or disconnect the connection without wire and then go to the HP support for HP Color LaserJet 1600 printer. Find your printer driver and reinstall.

  I hope this helps!

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP Color LaserJet CP2025: Intermittent problem with printer producing pink wide unslightly strips

  I use a HP ColorLaserJet CP2015.  From time to time he overprinted documents with pink ribbons which is unslightly.  The documents can be used only for use in-house.

  It is an intermittent problem and may occur as early as the beginning of printing or begin in the middle of a print job.

  I ran a diagnostic report, but I do not know how to interpret it.

  Any suggestions?

  Thank you

  Alan

  P.S. I'm sure that the printer is out of warranty.

  Just thought that I'll let you know that so far I did not have pink wide overprinting.  It seems that it was a faulty cartridge.  Thank you very much. I would not have thought this.

• HP Color LaserJet CP3505 Company Logo print upside down and backwards?

  Hi all

  IM currently facing a weird problem where a certain part of the page (the Company Logo) is printing backwards and forth. No changes were made to the system recently.

  The printer is a network printer that is installed on Windows Server 2008 R2 Standard Edition.

  Model number J7987E.

  Ive tried printing the same page in multiple operating systems, multiple machines, etc. Nothing helps.

  Ive also tried to print the exact document to another printer, the printer prints very well.

  From what I can tell, the drivers are up-to-date.

  Any idea? This printer is used specifically for printing invoices and is rather important.

  Update the drivers for PCL5c, PCL6. Our unit was having the same problem. The driver update worked.

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• Impossible to activate the services web ePrint for Color LaserJet M551

  Hello

  I read all the posts in this forum about the web services enabling ePrint to the question and tried all suggestions with no luck.

  Here's the situation:

  1. The printer works fine on place. I can print without problem.
  2. The printer is connected.
  3. All my router ports are open for outbound connections, including UDP.
  4. Communication using log in my router I can see that the printer can resolve DNS names using either my ISP DNS server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows ' registration-pro - site1print.houston.hp.com "Decides to 15.240.60.111 and" registration-pro - site2print.houston.hp.com "Decides to 15.201.224.79.
     This indicates that the printer can indeed resolve the addresses. Newspapers also Awakenings that the printer communicates with the servers (connection is established and data transferred) via https (probably the web service), but always after a few minutes the clearance process is to expire.
  5. I tried this allowing the procedure since a few days my believe that the recording servers should have worked some time during this period.
  6. I'm frustrated
  7. .. .even more frustrated
  8. what I am doing wrong?
  9. Help, please!

  trying to install eprint for my new M551dn Color LaserJet and it fails with the

  Who out there having the same problem I had. HP could not help me I restore to factory settings and reconfigured everything and all of a sudden the printer managed to enable web services and print the print code.

  Good luck to you face the same problem!

  / MrQQ

• Color Laserjet 5550dtn: slow down communication with the configuration of the printer

  My Color Laserjet 5550dtn suddenly lost the capacity of its network - as evidenced by the disappearance of the network address in the printer display panel.   I replaced the jetdirect 615n card, and I could then access the installation of I/O again and set the address of the printer that it had before (192.168.1.106)

  The printer seems to work OK, but when I try to access the printer via my browser, using its address, screens appear, but after a very long delay - sometimes up to two or three minutes.   Similar delays occur every time I have change the Access tab.

  I put the mask 255.255.255.0, and the DNS server on 192.168.1.1 (the address of the router system) and have disabled other protocols except TCP/IP.

  I don't remember the exact settings I had before, so is there anything else I may have missed that causes this extremely slow response?

  Any help would be appreciated

  Sorry for not answering before, but my wife is damaged the problems of column vertebral too take precedence over all the rest for a while.

  I started to have more problems, leading to no communication via the ethernet card at all and only work with USB connection.   I bit the bullet and bought another printer of opportunity - without the cartridges of ink, which works very well, and commicates quickly to local net address.

  I saved some of the components of the old machine, so the expense was not so bad really.

  The original machine was always a little suspicious, but it was also used, maybe, I had a bad Control Board.

  Thanks for the useful suggestions.

• MFP M277 dw: Color LaserJet MFP M277dw Pro issues with iMac

  I have a 2015 21.5 "iMac running El Capitan (10.11.3) and a HP Color LaserJet Pro M277dw MFP that falls in offline mode when it is idle for a while.

  Once the Mac has been sleeping, I can no longer copy, scan or fax without having to restart the printer and the iMac. And it is intermittent. This does not happen everytime the iMac goes to sleep, but no doubt it happens once or twice a week.

  The printer is connected both wireless (so that I can print from my iPad in other parts of the House.) and directly to the iMac via USB.

  I have updated all the HP software related and have applied the last update of the HP firmware for the printer as well. I also ran through all the game instructions that were provided with the printer.

  Other troubleshooting tips would be greatly appreciated.

  Hi @RBurgett,

  Thanks for joining the Forums of HP Support for a solution to your fall issue offline printer.

  I understand you have a HP Color LaserJet Pro MFP M277dw connected to a wireless network for your iPad and connected with a USB to your iMac running Mac OS X 10.11.3 El Capitan, but the drops of the printer is offline after has been idle for a while and becomes also insensitive after mode "Eve". I would like to help with that.

  If you see the message on the printer offline on the iMac, it would be because the iMac think he's using the wireless printer, when it should be using the USB connection.

  You should be able to solve that by unplugging the USB cable. Once the USB cable is removed, reset the Mac printing system. If you don't know how to reset the Mac printing system, here is a document of support that can help - reset the printing system.

  After printing Mac system has been reset, you should be able to reconnect the USB cable and add it to printers and Scanners.

  As far as being not able to copy, scan or fax without having to restart the printer and the iMac that could be solved by resetting the printing system and making sure the USB printer is listed in the printers and Scanner. When the printer seem to be insensitive, the first step is to perform a reset of the power on the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

• Unable to print on Windows 8 with Color Laserjet 1600

  I installed DOT4x64.msi on my new laptop HP Windows 8, since this seems to be the only average current to connect my Color Laserjet 1600. The printer will now appear in the section "Devices and Printers" Control Panel.  But when I try to print something, I get an error message that says that I can't print to the printer. I spent nearly an hour on the phone with HP support with no resolution - in fact, after all this time, I was told "this Department does not support this printer!.» Any ideas on a solution here? Thank you!

  PS - I initially posted on a different picture, I hope someone here can help.

  For this device, the driver of windows 8 will not release until the end of January. Please bookmark this site and refer to it for more information up-to-date.

  Can I 8 supported for LaserJet printers

  In the meantime, drivers windows 7 should work for this device.

  Color Laserjet 1600

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Color laserjet 4700dn: color laserjet 4700dn will not duplex with upd

  Hello

  I'm trying to place drivers for our color laserjet 4700dn via login script. The only driver available on HP downloads for this model is the universal printer driver. When I install the printer and let Windows 7 uses the pilot that it downloads from Windows Update it duplex very well but I can't find where to download this driver package, so I'm stuck with the universal printer driver if I want to withdraw what my login script.

  With the UPD if I select duplex printer just ignores the setting and proceed to print single-sided. If I set the default forward on duplex printer preferences and then print from an application, it works but then I have to go back and change the preferences or each job prints duplex.

  I hope that someone knows a fix for the duplex problem UPD or there maybe somewhere else I can download the specific driver for 4700dn color under Windows 7 64-bit, which would be even better. Otherwise I'll be stuck manually install the printer every time I created a new workstation.

  Thanks for your suggestions.

  I finally found a driver that I can ride if a login script that works for double-sided printing with our Win7 64 bit workstations. Here is a link to the site in case it's useful for someone else is trying to spread out the drivers.

  I used one called:

  "Driver HP Color LaserJet 4700 PCL5 64-bit (for use with AMD Athlon 64, AMD Opteron, Intel Xeon and Pentium 4 with EMT64) - Windows XP/2003/Vista/2008 (64-bit).

  http://printerdriverseries.com/HP-Color-LaserJet-4700-drivers-and-software-download/