Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

Similar Questions

• Color LaserJet 2600n: uneven printing CLJ 2600n

  I recently had an opportunity Color LaserJet 2600n and inside it was a MESS! I have it cleaned and replaced all four cartridges of toner with new HP OEM units and it is printing enough now. But, if you look at the thescan of the page supplies below you can see two of the colors fade out as it goes further to the left (yellow and Magenta).

  I went through the service manual and can not see any sort of adjustment for cartridges of toner, ETB or merger. I know that old need to replace toner cartridges (I think they used a type of charging service since two of them were on the run and one was a brand of Office Depot).

  I'm really not only to replace the parts in the hope he can fix it. Someone has an idea if it is a question EBT or fusion? Perhaps another part or adjustment?

  Thanks in advance!

  Larry.

  

  Larry, this is a known issue with the scanner Assembly laser. The good news for you is that it can be fixed by cleaning, but there are some necessary disassembly. You should be able to find instructions online to document the process to disassemble the printer, removing laser Assembly, cleaning of optics in it.

  I did once and it was relatively easy, but you don't need a little space to put parts on and little patience.

• LaserJet MFP M277dw Pro: problem with printing issue

  We have the model HP laserjet MFP M277dw, we love it, but have been a problem with what looks like small pink flies on one side of the paper when it is printed, is there a setting that turns off or what is the cause, thank you

  UPDATE: took MFP and was checked by techie printer, tried a new toner and does no differenct so he rang HP and they replaced the MFP, it was still under warranty

  Thanks to those who have tried to help

• For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  Hello DavePerdue,

  Thank you for your message.  Click HERE for your driver from the HP website.  It seems that it just took some time to get the driver online and available for download.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Printing problems with my HP LaserJet 3200

  I'm having a problem with my HP LaserJet 3200. Or maybe with my laptop? Sometimes when I try to print, it shows an error in the printer status area and no ready button flashing on the printer. If I cancel the print job, disconnect the USB printer for 5 to 10 seconds, plug it in again, and then click Print - it works. I can print, copy and scan, so I'm hesitant delete the printer and add it again. I use Windows 7 64-bit. I have the above work around, and this may seem trivial it will work eventually, but I was wondering if anyone has any ideas to solve the problem. Thanks for your help.

  Hi Jwill,

  Thanks for posting on the Microsoft community

  We understand that you have problems with printing. We would be happy to help you with the problem. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates. This tutorial does not cover printing problems related to specific applications. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  In order to better help you, please let me know some details:

  What is the error message you get when the printer no longer works?

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: delete the printer spooler and select the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
   
  Method 3: you can follow the link that will help you solve the problems with the printer below.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please reply with the results so that we can help you.

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.

• Problem with printing in format Adobe acrobat, DC

  Help

  I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC

  Since some day´s a can´t print my documents in Adobe DC.

  What I did:

  0 reinstall new driver for my printer

  1. New Installation of Adobe Acrobat DC

  2. Installation of the New Apple OS X el Capitan software.

  3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.

  4. all other software can use the printer on my system.

  Important: before that I had problems with printing works I didn t have had problems.

  What can I do?

  Thank you

  Neugebauer, Germany

  Hi frankn30090339 ,

  Sorry for the inconvenience.

  You can download the latest patch that contains the resolution of this problem.

  Please see this link: failed to print in Adobe Acrobat format

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• Color LaserJet 2600n and manual duplex option

  Hello
  I have a Color LaserJet 2600n and I have a duplex manual problems

  I've updated my WinXP OS and the manual duplex feature does more (System with OS Win7 system with x 64 and x 64 win8.1)
  in win XP, I selected the manual duplex function. the system brings up the dialog box with the instructions to do so (for example: press 'V' on the printing Panel when ready)
  WinXP worked perfectly

  Win7 x 64 print all pages of one after another (the system does appear in the dialog box with the instructions to do but do not work)

  WIN8.1 x 64 does not allow me to choose the manual duplex function and I need print the odd pages before even-numbered pages.

  I can solve this problem?
  I can print with the manual two-sided dialog box and how to enable this feature?

  It is perhaps a silly question for Hp, but it is so important for my work and my research

  Thank you for all.

  concerning

  Sicard

  Hello

  To get your question more exposure, I suggest you post in the trade forums since your product is a commercial product. You can do this in The Forums printers - LaserJet.

  Enjoy your day!

• HP Color LaserJet 2600N Windows7

  Hello

  I have a HP Color LaserJet 2600N in my local network.

  Currently I install my new PC with Windows7, but I can not install my printer.

  What is the best way to solve this problem?

  Thanks for the help and advice.

  Rainer

  OK, the problem is resolved.

  Using the W7 compatibillity function solved my problems.

• Power failure during the update of firmware for Color LaserJet 2600n

  Just in the middle of the update the firmware for my Color LaserJet 2600n, the power is out. Now I can't get anything to happen on the printer. The screen, or the power lights and the error light, but it does not work when the power is put on. I think that he wiped the previous firmware and either had not started or has been along the way in writing the new info. Is it possible that I can cancel it and reload the original firmware? It hangs on my MacBook Pro running OS 10.6.8. The only thing that the instructions seriously cautioned against a interrupt the installation. Needless to say, this is exactly what happened when the power is out. Any help would be greatly appreciated.

  Randy

  Able to understand me. Has proved to be quite simple. Powered off the printer and turn it back on and represented the firmware upgrade program. The printer didn't restart automatically, so I had to power off and wait 5 seconds before feeding this back. Once he recalibrated itself (which takes several minutes), I was in business.

• Snow Leopard and HP Color laserjet 2600n

  Does intend to write a new driver for the HP Color laserjet 2600n HP? I own this camera and can not use it because I upgraded my os to snow leopard.

  I reinstalled the driver on the site of HP, dated 2007 I believe.  My 2600 is connected through a router.  He recognized the printer and find the correct IP address.  It executes and prints correctly, just does not show supplies, i.e. the ink levels, but it prints again.

• I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do?

  I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do? This happen after I bought some coins for a game

  You must settle the debt until you can download something else of the podcast episodes on the iTunes Store or select None as the payment option.

  (142394)

• Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions