HP compaq 4300 pro SFF: System starts only to access the factory settings, but says it cannot start program, closure of an option

Similar Questions

• Satellite Pro L450d-12 x help restore to the factory settings

  I want to go back to the complete factory settings (as if windows has been reinstalled)
  There is no repair option in the advanced startup options (are there all the other options)
  If I go into disk management, I can see
  (C)
  recovery_data (D)
  (anonymous) (OEM partition)

  all the these have the status of healthy.

  There recovery.wim in the d drive, and a winpe.wim

  There are a lot of educational software that came on the phone that I do not have the cd. So, I don't want a new installation of windows.

  I tried to do a system repair disc, it upward with could not be created (0 x 80070057) so I'm not able to boot from the cd

  Is it possible to reset to factory settings complete with recovery or partition without a name?

  For future referance that is needed (a? or other? or both?) windows restore disk 7 oem 32-bit pro (version of windows I use) or the pro L450d-12 x recovery disk toshiba satalite?

  Thanks in advance

  > Is it possible to reset to factory settings complete with recovery or partition without a name?

  In General, you have two options:
  Either you try to retrieve the laptop using recovery disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  or you will recover the laptop using the Toshiba Recovery disk which you likely has not been created in the past using Toshiba Recovery Media Creator. Right.

  Well, if the recovery of HARD drive does not work (whatever the reason), then you must use the recovery disc. If recover disk has not been created in the past, you can order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

  This info has been helpful?

• Memory RAM replacement hp compaq 6200 pro sff

  I have hp compaq 6200 pro SFF, now has only 2 GB of RAM memory and I want to add more to it. where can I find what I need? I have a couple of old computers here, but need to know if I can use these memoirs RAM for this computer. I can't find it.

  Hello:

  Here is the link to the quickspecs for your model...

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04123261

  Info upgrade memory are on page 7.

  Note that you can install 4 x 8 GB PC3-10600 memory, even if the configuration table only 4 x 4 GB.

• HP Compaq 6005 Pro SFF PC: RAM-I let crucial scan my system

  Crucial scan says I can use DDR3 PC3-14900 • CL = 13 • unbuffered NON - ECC DDR3-1866 • 1.35v • 512Meg x 64... My computer has DDR3 PC3-10600 (1333 MHz)... I thought I had to say with my ram support due to the mobo and cpu speed... SG972UC #ABA, HP Compaq 6005 Pro SFF PC...  I have the chance to buy faster ram if it will work. Thanks if you can help!

  The B97 is not listed on pg 2 illustrated parts Guide.

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• HP Compaq 6005 Pro SFF PC: use reference dell 531 parts s in my PC HP Compaq 6005 Pro SFF

  I try and speed up my computer, I have a computer dell 531 s this works (vista). Hard drive crashed. I was hopeing I could use something out of it. This is for my HP Compaq 6005 Pro SFF PC, SG972UC #ABA... Thank you... Mike

  Hello:

  Compare the specifications of the two models, it seems that the only thing you can use the hard drive, what said you was not good, so it does not work.

  The 6005 Pro uses different memory (DDR3) and 531's DDR2, which does not in a DDR3 slot.

  The 6005 uses another set of AMD processors and that of your 531 s will not work in the 6005 Pro.

• Invalid electronic serial number after swapping out motherboard, HP Compaq 6200 Pro SFF

  Hello

  I have just replaced a motherboard under warranty and I try to find the utility to change S/N in the BIOS, have obtained a location for the equivalent laptop but can't find the PC version using a USB.

  I have CSN access, but cannot find the utility appropriate to effect the change.

  PC is:

  HP Compaq 6200 Pro SFF

  Any help would be appreciated.

  Thank you

  Darren

  [Personal information]

  Hello:

  Here's what you need to do... This model has no need to inventory number or serial number change utility...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• HP Compaq 6005 Pro SFF PC, a student protected Bios password

  Hi all

  I have a HP Compaq 6005 Pro SFF PC who was in a classroom and a student a BIOS password unfortunately we don't know who or when I need to be able to access the boot order on this machine to reimage the reader for the deployment of windows 7 new...

  The machine is only 3 months old and if I can't get in, it will be placed in a cell from useless in its current state...

  Is there a tool or a technique for the password reset bios. Remove the battery didn't solve it!

  I have 3 computers HP laptop 6730 b former officials went with BIOS password on them I have to be able to reset these that I googled for the resolution and the answer seems to be to replace the motherboard, which is not really an option because of the prohibitive costs.

  Is there a recovery tool or tip or trick to do this?

• HP compaq 6200 pro sff: drivers missing

  good day to all,

  help with the following missing drivers.

  controller Ethernet (hardware id);

  PCI\VEN_8086 & Dev_1502 & SUBSYS_1497 / 03C & REV_04

  Pci\Ven_8086 & Dev_1502 & SUBSYS_1497103C

  Pci\Ven_8086 & Dev_1502 & CC_020000

  Pci\Ven_8086 & Dev_1502 & CC_0200

  In addition,

  PCI simple communication controller

  SM bus controller

  PCI serial port.

  The PC is HP compaq 6200 pro sff

  Windows 7 pro 64-bit.

  Thank you.

  Hello:

  You need these drivers...

  SMBus:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_88640_1 & swEnvOid = 4059

  Simple PCI and PCI Serial Port:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_138955_1 & swEnvOid = 4059

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_108131_1 & swEnvOid = 4059 #tab1

• No system boot, how to access the recovery partition?

  Hello
  While messing around with win7 and xp (from vista that was preinstalled on my system), I managed to make my computer unbootable.

  I made the recovery discs when I came to my computer, but I left with my parents... which is be the other side of the world (literally).

  However, I also kept the "recovery partition" intact, I hoped I could start somehow, but I don't know how.
  I tried holding down the zero, F2, F8... of other ideas?

  If not, is there another way to do it from a live CD? (like the one I currently use to write this message)

  Chris.

  Unfortunately, you will not be able to access the files for recovery. It can be done if the laptop has only factory settings. You use updated the system with two operating systems. If you want to have the factory settings again you can have with using the recovery disc only.

  I put t know how long it will take but maybe you should communicate with your parents and ask if they can send you the recovery disc as soon as possible.

  Otherwise you will have to use the installation disk of Microsoft for clean operating system installation. It can also be good solution for a few days until what you expect of original disc.

• Cannot reset windows 8 for the factory settings and get an error 0xc000000f, after system startup.

  * Original title: I can't seem to be able to refresh, reset or reinstall my windows 8

  I have a laptop Asus s200e

  I would I have tried to reset my windows 8 to the factory settings and the thing is he always tells me that I have missing files and I need the installation disc. That is, that I don't have an installation disc because it is preinstalled and I tried to start up and I got an error 0xc000000f.

  Please help me

  Hello

  Thanks for posting the query on Microsoft Community.

  Am sorry to know that you are unable to boot the system, and you get an error: 0xc000000f.

  This error can occur if some files are corrupted, or if you have made changes to your computer.

  Did you change to your system, the hardware and/or software, before this problem?

  You can try to restore the computer configuration by clicking on the link below.

  Windows 8-How do I restore the system to the factory default settings, if I can't get into the system?
  http://www.ASUS.com/support/FAQ/1008226/

  Note: If you reset the computer to factory settings, it will remove all applications, programs and drivers that you have installed. If you need to reinstall all applications and programs, once you reboot the system.

  If you still have the same problem, you must contact the Asus technical support. Here is the link: http://support.asus.com/ContactUs.aspx?SLanguage=en

  I hope this helps. If you still have problems with windows know please let us.

• How can I reset my MacBook Pro using El Capitan 10.11.4 to factory settings?

  How can I reset my MacBook Pro using El Capitan 10.11.4 to factory settings?

  Factory settings? As in totally blank? What to do before you sell or give away your Mac - Apple Support

  If you keep the Mac, just look at step 6.

• Best order of events after the recovery of the system to the factory settings?

  I have done so recently a system recovery to the factory settings on my laptop and I was wondering just what I need to do and in what order to ensure the security of my computer.  Also, what is the best way to get Windows updates?  Should I open check updates from Control Panel or let them come as I go about my business or y at - it another option I should know about.

  Thanks in advance.

  Hello

  You can tell Windows to check the updates of their installation at a faster pace. You could
  Download and install Service Packs manually however allow updates as
  usual will allow still more special updates to install.

  In telling Windows to check updates or don't expect that the automatic update are essentially
  equal. Rob - bicycle - Mark Twain said it is good.

• HP Compaq 6200 Pro SFF: Opgrade Windows 10 - HP Compaq 6200 Pro Small Form Factor PC

  Hello

  I want opgrade Windows 7 Pro (64 bit) to Windows 10 Pro (64-bit) with a clean install.

  I am aware that I have to choose the UEFI mode in the start menu, but do I

  enable/disable in the BIOS before I boot the installation DVD?

  Concerning

  Knud Erik

  Hello sfinksen ;
  
  Let me welcome you on the HP forums!
  
  I read your post about upgrading your PC to Win10 and wanted to help.
  
  First of all, you do not ask UEFI install Win10 Pro 64-bit.  I installed on a desktop computer using BIOS and MBR and it works very well.  You're not even sure that a Mini-PC offers the possibility of UEFI?

  Then, personally, I recommend the update.  The problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  To further complicate things, the GoBack to Win10 function has been proven to be unreliable, so when people are trying to return to an earlier OS when it does not work, cannot leave the machine in a damaged condition, such as only a full factory reset HP recovery support it will get back to a working condition , and not only you have to buy only media, you end up losing all your data, settings, and applications in the process.
  
  However, you can protect yourself from this kind of problems if, BEFORE you do that, you consider using a third-party application Imaging/restoration as Macrium Reflect to image your machine off, so you can easily restore it if something does not work.  And don't count on the Win10 GoBack function back on Win7, it is not reliable and can leave your computer in a damaged state.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  In addition, a clean install of Win10 lights only in the following circumstances:

  1) using build 10240 (RTM), an upgrade in previous place was done and confirmed have activated.

  (2) using the updated 10586 (November), a valid before the OS product key has been entered.

  So, if you have decided to do a clean install, you'd better using the MS Media (MCT) tool: Windows Installer by using the tool of creation of media - 10 Windows help

  With this tool, you have the option of (1) creation of installation of Win10 (USB or DVD) media, (2) download an ISO file, (3) update the PC directly.  If all you want to do is updated on this PC, then choose the option: upgrade this PC now.  This tool automatically selects the generation 10586 - giving you the opportunity to enter a product key to activate it.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Compaq 6000 PRO SFF: Need some drivers for this desktop computer

  Hello, I have a model # HP Compaq Desktop 6000 PRO SFF and I need drivers for it the following:

  PCI serial port

  PCI Simple Communications controller

  Trusted Platform Module 1.2

  Someone please help... Thank you

  You are the very welcome.

  You need this driver.  Install manually if auto installation does not work.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45367 .exe