Problem with high utilization of the processor of the CEP engine HTML

Similar Questions

• Satellite C650D - a high utilization of the processor and the disk

  Hello

  Quite often get 'high 100% CPU usage' or "High use of the disc" message using IE9 or various other applications. Computer seems to work ok although slow do not very often. Scanned with Norton Internet Security 2011 and ok. Malware problem?

  Any suggestions would be helpful.

  Mrpringle

  Hi mrpringle,

  What program tells you that you have a high utilization of the processor and HARD drive? I never heard about these messages and it would be interesting to know what program it is.

  What operating system you are using?

  Please take a look in the task manager what process causes high usage.

• MacBook Pro random high utilization of the processor (iCoreService/DCAManager using + 400% CPU?)

  Hello

  I'm running an Early 2011 Macbook Pro running OS X Yosemite 10.10.5 with a 2.2 GHZ Quad Core i7 processor 1 TB Samsung 840 EVO SSD and 16 GB of RAM Crucial. I noticed for about a month, I'm going to do a simple task or two on my Mac, then all of a sudden I noticed spikes CPU temporary, 90 + degrees C and the kick of fans trying to cool high speed. Well, I don't know why this is happening when I do nothing to justify a high utilization of the processor. I'm used to the CPU running hot when I do something intensive graphic as running Autodesk Inventor CAD software, run a machine virtual or even watch a 1080 p @ 60 fps video on youtube (it is the lowest resolution that requires the Mac switch to the dedicated AMD Radeon 6750 M GPU that usually eventually warm it quickly) , but this use high random that happens when I have Mail open in the background, and one tab open with a 720 p @ 30 fps video Youtube open (or even less). I took a few screenshots of the activity Manager indicating the best processes and Intel Power Gadget indicating the temperature of the CPU:

  

  

  

  Does anyone know what are iCoreService and/or DCAManager and why they use so much of my CPU when this happens? And someone has encountered this weird behavior before? Thanks in advance!

  The most likely cause is an applicztion you have running that is corrupt and forcing them to use the CPU too. Were you able to kill the process in activity monitor? If you have not yet tried to do, so I'll try that first. I would also try to quit all open applications.

  If you start the computer in Safe Mode , you can test if the problem is still there. If it isn't, usually means something that is managed by you start-up or an application that you use may be the cause.

• Leaks memory satellite L655 - 14 d, high utilization of the processor after Win 10 updated

  Hello world

  recently, I updated my Toshiba L655 - 14 d running on win7 Home premium 64-bit to win 10.

  After that update system is memory leaks, high utilization of the processor and get stuck every 5 to 10 seconds, is a rhythmic problem happens while Starter upward.

  If music is played nothing breaks and distortion, while using word or another office associated SW it became marked delay in the characters that appear on the screen, using the internet or live streaming is also not smooth.

  Any suggestions to solve these problems?

  It is advisable to change the RAM and upgrade to the new HARD drive (current RAM is 3GB 1066 MHz and is disc HARD 500 GB, ATI Radeon graphics card), if the change has advised if I want on the RAM even or I can go for a more of the same for the HARD drive also.

  Thanks in advance.

  You may need to check if the problem could be related to some drivers installed (maybe GPU driver would need an update) or 3rd party software.
  Background running processes in the context of the system could block the CPU, and this could slow down the performance of the system...
  So a quick glance in the task manager can be useful.

  Of course, upgrade of RAM can be useful too... If you run Win 64 bit system, upgrade of RAM is recommended.
  The 32-bit OS can handle only 3.2 GB RAM... so in this case the RAM upgrade would be useless.

  With regard to upgrading the HARD drive:
  The SATA controller is able to manage any size of HARD drive, but to be honest, this will not increase the performance of the laptop... But change from HDD to SSD drive would increase the performance of the system... so I recommend you replace the HARD drive with SSD drive.

• In obtaining Windows XP SP3 notice of high utilization of the processor, but do not know the cause

  I keep having problems with high CPU usage, but I don't know what is the cause. I know Norton has sent me a few messages on dumprep.exe high utilization of the processor, but this isn't the only time where she do this and it is causing my computer runs slowly, and a few times the last 2 days that makes my strongest computer. I hope someone can help because I don't know anything about all this

  Hi SandieLaster,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. When the high CPU usage occurs?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• High utilization of the processor all in buffering a video

  I have a high utilization of the processor (over 40%) while only buffering of this video.

  IE10pre1

  

  Firefox 20121229 nightly, protected mode enabled

  

  Firefox 20121229 nightly, protected mode disabled

  

  Opera Next

  

  Chrome Canary

  

  a) open this url: http://www.wimp.com/marsearth/

  (b) pause the video if it starts automatically

  (c) use the the Task Manager or process explore to display the cpu/gpu use

  reproducible: for most

  Windows 7 SP1

  Flash Player 11.6.602.108 / HWA enabled

  TestPC: Gigabyte GA-K8NS Pro; Venice AMD Athlon 64 3200 +. 2 x 1 GB DDR MDT-400-CL2; Club3D HD4670 AGP; Samsung HD103SJ, SyncMaster 204BM

  While we are aware of the problem, there is little we can do about it.  The modern realities of security of the web browsers have made sandbox, a necessity.

  There is a good explanation of what is happening here: http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

  Long story short, every video packet must be transmitted from the browser to a medium integrity process broker, then the integrity process low drive flash for rendering.  If an attacker is able to hijack the thread of Flash Player, the process is low integrity, which prevents the attacker to do a lot with it.  While it is not an absolute guarantee (nothing security is), it raises the bar significantly for the attackers.

  The downside is that all this additional message passing consumes cycles CPU, especially if you are trying to fill a buffer of exceptional size as soon as possible.  There's not a lot of opportunity to optimize this.

  If you're fine with the risk, you can manually disable ProtectedMode on your machine.  If you deal only with trusted sites, and you do not have anything critical with the machine (work, banking, etc.), then it is probably not a huge deal.

  Finally, ProtectedMode is like a vaccine - it's one thing to immunity.  If the majority of people run it, exploits targeting machines without that it does not conform and probably not merit to be pursued when you look at the effort involved in the development of a feat of end-to-end.  If a large number of people turn it off, it becomes economically attractive for builders of networks of zombie computers, and you will have problems if you do not use.

  To disable the Protected Mode, add the following line to your mms.cfg file located in:

  32-bit Windows: C:\windows\system32\macromed\flash

  64-bit Windows: C:\windows\syswow64\macromed\flash

  ProtectedMode=0 
  

  If the mms.cfg file does not exist, create one to any text editor standard (p. ex. Notepad)

  Depending on your operating system, you must first save the mms.cfg file in a directory writable (for example, your document or desktop folder), and then copy the file into the folder using Windows Explorer.

  To re - enable Protected Mode, simply delete the line in the mms.cfg file.

• high utilization of the processor in standby mode / x 230

  Hi all

  I have an i5 x 230, win8 installed pro on an ssd crucial msata m4, 16 GB of ram. Recently, I noticed a sharp decline in the life of the battery. I believe that this is due to the high utilization of the processor when idle, I see it in the Manager of tasks and shows the process system hovering over 30% cpu usage. It goes down when I restart, but just on the rise after some time, perhaps on his return from his sleep.

  Does anyone have any idea on this? I tried to get a little knowledge base, but nothing came.

  Thank you!

  Hello

  Maybe it will help the following message thread: Ricoh card reader use 25% CPU

  Kind regards

  Aryeh Goretsky

• Windows 7 high utilization of the processor (60-70% on idle).

  Hi all!

  I have a very big problem with Windows 7. The situation is the following:

  I installed a new Windows 7 (I tried Ultimate, Enterprise Edition and Professional now). I install it, and 1 start the CPU use is about 60-70%, without having to install anything. The problem does not persist in Win XP x 64 or Vista x 64. I will upload 3 photos on the problem.

  They are here:
  1st photo.
  2nd picture.
  3rd picture.

  Process Explorer screenshot

  (Sorry for the Hungarian Windows images)

  I don't know what the cause of this problem, each driver is installed properly. The edge LAN/Fireware/sound is disabled in the BIOS.

  My computer is:
  CPU: Intel Core 2 Duo E6400 (2 x 2, 13Ghz)
  Motherboard: Asus P5KC
  RAM: 2x2gb 1066 Mhz Zeppelin
  GPU: GeForce 9600 GT 512 MB
  HARD drive: 250 GB - os Samsung SATA
  ODD: An ATA Nec DVD - RW and a DVD-RW SATA

  Unfortunately, this is a very annoying problem, and I can't use Windows 7 like that. I hope someone here can help me, and I can run Win 7 normally.

  Thank you in advance!
  -fearking.

  check the post on Marble68_B:

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/b5c79a15-781b-455a-9003-6d305695fce0

• my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.

  original title: Itunes problem

  my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?

  Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.

  Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.

  (Vista 32-bit or 64-bit)?

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem with silverlight download, download the error code 2104.

  Original title: problem with Sliverlight download
  get the error code 2104. tried to uninstall and reinstall

  Hello

  Thanks for the reply.

  We are pleased to know that the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. Please contact the Windows community.

• I have problems with my application of the java language.

  I have problems with my application of the java language. It will be open only for about one second, and it won't let me write all programs, it looks like the command prompt when opening. what the * is underway and what can I do to solve this problem.

  Hey Kevin,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it.

  I would really appreciate if you could answer the following questions:

  1. is the specific question of the application of the Java language?

  2. did you of recent changes made to your computer before the show?

  3. you receive an error code or message?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If the problem is specific to the Java application, then I suggest you to contact Java support from the links below:

  http://www.Java.com/en/download/support.jsp

  Java Help Center:

  http://www.Java.com/en/download/help/

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo