HP Compaq 610 ExpressCard, 1st and 2nd generation

Similar Questions

• Is there a 1st and 2nd generation of the HP62xl printer cartridge as if it was with th HP61xl cartridge?

  Is there a 1st & 2nd generation of the HP62xl printer cartridge as if it was with th HP61xl cartridge?

  Hi @tollymcc,

  Welcome to the Forums of HP Support! I see that you would like to know if there is a 1st & 2nd generation of the 62xl HP cartridge. I would like to help you today.

  I came across this information on 1st & 2nd generation cartridges, cartridge more / cartridge of generation more (HP61, 301, 122 and 802). It doesn't look like the HP 62xl is included.

  It will be useful.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• I have ipod touch? 3rd and 2nd generation? The serial number is 1 has 932283201

  I looked through all the descriptions of the 2nd and 3rd generations, but I don't know yet. The serial number is 1 has 932283201

  A second.

  (137235)

• Satellite L500D - can only burn the recovery of 1st and 2nd disc

  I bought this 2nd hand computer laptop in the last two days with the factory default reset. However, I could only burn the 1st recovery disc 2 of 4 using Toshiba Recovery Disc Creator.

  I am running Vista Home Premium SP2 32-bit. I started at F8 factory reset "out of the box" settings that went well. I did where there was a small problem when the previous owner restored to factory settings.

  As he had SP1, I installed SP2. I upgraded the BIOS to 1.1 to 1.4, the latest. I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  Downloads from http://www.mytoshiba.com.au/support/notebooks/satellite/l500/pslk0a-00r009/download.

  I changed to another brand of DVD blank. I have checked and unchecked "Verify" in the Recovery Disc Creator. I also have the latest installed version of the Toshiba disc Creator software. I tried to burn discs 3 & 4 separately overall

  I get no error message, just as the taskbar progress 3rd disc ends never quite at the end. The former owner has never created a set of the factory restore disks. Any thoughts would be appreciated.

  Hello

  to be honest, I have not idea why t he does not burn it. I can offer you:

  1. use a high quality like Dvd - R verbatim media

  > I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  2 maybe, he won't burn with Toshiba disc creator software update. Restore back factory settings and try again with the old version of Toshiba disc creator.

• Paragraph style with different key on the 1st and 2nd lines

  Hello

  I want to do a paragraph for a caption style. The font size is 5. the first line must have 5 pt leader and the second line must have 6 main points. Is it possible to select this as a paragraph style or I have to put the different leading to each line manually each time?

  Adrian

  Could be done, I suppose, using a style of character as a nested line Style, but why do you need to do this? The leading of the first line value does not actually affect the first base line in a block of text. Would probably be a better way to fix the first line of base to 5.

• I have ipod shuffle 2nd generation and need new charger (dock) can still buy these?

  I have ipod shuffle 2nd generation and need new charger (dock) can still buy these?

  Apple no longer sells the official replacement of the USB cable with the "cradle".  Do not buy the replacement USB docking cable for the current 4th gen (3rd generation) iPod shuffle, because it does not work with 2nd gen shuffle (the connector is different).

  There are 3 replacements of party, for example

  http://www.Amazon.com/eForCity-Sync-Charger-cradle-shuffle/DP/B0042EB270/

  There are other products similar, including some who do not have the cradle, and some who do not even have a cable (like this one)

  http://www.eBay.com/ITM/USB-data-sync-charger-cable-for-Apple-iPod-shuffle-2nd-G balances - / 221546931454

  Ensure that the product is described as being the shuffle gen 2  I'd go with one that has a docking station, because it maintains the shuffle at a constant specific position compared to the socket, which can be important for a shuffle gen 2.

• HP compaq 610: I want to upgrade my ram and cpu

  Hello

  I have a laptop HP compaq 610 with a intel core 2 duo 2 GHz with 4 GB of ram and a 64-bit processor

  It is therefore not good for games

  now I ask you for the the hardware options available for the upgrade of my camera

  I wanted to add a 8 GB of DDR3 ram and a 3 GHz cpu

  so can I use RAM

  and what are the cpu options can you give me

  Thank you for your valuable time.

  LoRdRedh wrote:
  

  Thank you very much

  It is just that this processor is not good for the games so I have any options?

  You need to get a gaming laptop and those cost 2000US started playing HD games.

• 2nd generation and 6th gen Ipod touch.  Can I continue to use both?

  I have an Ipod Touch 2nd generation and get a 6th generation one for Christmas.  I want to continue to use both.  I heard that the 2nd generation will not be able to use the most recent ios.  How can I use both?  Of course, it takes a lot less memory also.  I have not would care if they are not sync, but I don't want to plug an and destroy the contents of the other.  Should I configure them with different user accounts or?

  You want to keep the same Apple ID That's what your content is about.

  You can very easily manage different content on each device. I manage different content on my ipad and iPod and they have different iOS.

  Your other older will continue to operate, he won't be able to do everything that the 6th gen due to having an older iOS and probably less apps that can be installed on it.

  And then if you use it just for the music, there are no descendants.

• Compaq 610 and WinXP install BSOD

  Hello

  I have laptop Compaq 610 with FreeDOS installed plant. By default, this laptop has 2 GB of memory, but I asked a 4GB that was installed in the store. I am trying to install Windows XP SP2 (32-bit version) for this laptop. However, I still get the blue screen of deatch during installation. The same thing happens when I tried to install WinXP SP3. This happens at the beginning of the install when the drivers are loaded and probably before trying to view the EULA. I ran all the tests that show HARD drive test in BIOS - memory, test. Also ran Goldmemory who has not detected any memory problem.

  No idea what is the problem?

  Thanks a lot for your help.

  Abyss

  Did you try slipstream ICH8 sata driver?

  You have a computer laptop bussines it an option for the native functionality of disbale sata, have you used it?

• charger and battery compaq 610

  Hello..

  I bought computer mmy notebook compaq 610 in 2009...

  my laptop battery backup is now 0%. n nw evn my xharger does not work correctly...

  charger is ok... can b d connetcting locations are damaged...

  can I get help to find out how much it'll cost me to maintain my Matthew and if I had to change the battery...

  how much it'll cost to get the new battery?

  Please help me...

  I need to examine it to see if there is a problem with the port of loading, but a really dead battery can make it seem as if the charger is not working properly. If you can describe the problem maybe we can further troubleshoot the power adapter. If you are willing to accept a non-genuine "compatible" battery, they are very cheap.

  Used in real

  New but real shipped from China

  New authentic in the United States

  New "compatible" United States

  A wide range of choices.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• can I upgrade cpu on HP Pavilion 1052ss g6 with 2nd generation processor Intel Core i5 - 2540M?

  HelloW to all

  I own a laptop

  • PORTATIL PC HP Pavilion g6-1052ss

  Product number: LQ283EA #ABE

  It comes with the 1st generation of intel i3-M380 processor with integrated graphics HD

  I found a service manual for my pc here on hp and there are the processors listed in repair so my question is:

  can I replace my cpu with Intel Core i5 2540 M 2nd generation processor contained in the manual of maintenance on page 79

  or just I have to use other 1st generation Intel Core™ i5 - 480 M processor?

  
  Thank you

  MrrGreeN wrote:

  HelloW to all

  I own a laptop

  • PORTATIL PC HP Pavilion g6-1052ss

  Product number: LQ283EA #ABE

  It comes with the 1st generation of intel i3-M380 processor with integrated graphics HD

  I found a service manual for my pc here on hp and there are the processors listed in repair so my question is:

  can I replace my cpu with Intel Core i5 2540 M 2nd generation processor contained in the manual of maintenance on page 79

  or just I have to use other 1st generation Intel Core™ i5 - 480 M processor?

  
  Thank you

  Hello

  I'm sorry, but you cannot use the Core i5 - 2540M. You must use the processor Core i5 - 480 M. Some laptops series G6 such as ones of G6-1200 use chips from the second generation, so the manual you have is a general for all laptops to G6. The first generation Intel processors use a different socket than the second. A possible compatibility for Intel processors is when you have an Ivy Bridge chipset third generation) and you can use a Sandy Bridge CPU (2nd generation)...

• My iPod nano 2nd generation gets disk errors after installing iTunes?

  I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

  The problem

  It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

  Error: The device, \Device\Harddisk1\DR21, has a bad block.

  ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

  So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

  Stuff leading up to it

  A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

  I tried many things

  • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
  • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
  • Reset iPod in now the Center button + menu button.
  • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
  • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
  • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

  It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

  You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

  Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

  How to put your iPod in disc - Apple Support mode

  and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

  I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

  NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• iPod shuffle 2nd generation will not be a link with itunes

  I just brought a used ipod shuffle 2nd generation and I can't seem to associate with my itunes account dosnt see toward the top in the list of devices? It binds with laptop and with the car but can't put mt on her music and her full load of expensive! and bon Jovi show!

  any advice will be welcome tried alternative lead? Potty

  Cheap and good jovi...  That IS indeed a serious problem.    But at least the iPod still plays music, so its battery is OK.

  You use the USB cable supplied with 2nd gen iPod?  It is long with a cradle at the end of the shuffle.  The replacement of home cable shuffle Apple sells currently is to shuffle 3rd and 4th generation and does not work with 2nd gen shuffle (connector is different).

  There are third party replacement cables, but they must be described as 2nd gen shuffle.  And they tend to be cheap and of poor quality, then this might be the problem here.

  If you have the right type of cable, when you connect it to the USB of your computer, look at the little light the shuffle.  Blink initially when it is connected?  It turn on, but remain solid (not flashing)?  There is No light at all when connected?

  Also, are you using a Mac or a Windows PC?  If Windows, which free?