HP Compaq 6200 Pro small-format: How can I tell how old my computer is by serial number

Similar Questions

• HP Compaq 6200 Pro small format: Re-install the network adapter

  Dear assistants & members,

  Yesterday, I tried to download a 64-bit system that has not worked and had trouble.

  I am trying to connect to the internet, but it still says: a network adapter was not found (something like that)

  I have seen a lot of messages so I already do my hardware ID:

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C & REV_04

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C

  PCI\VEN_8086 & DEV_1502 & CC_020000

  PCI\VEN_8086 & DEV_1502 & CC_0200

  I hope you self-introduction can help out me.

  I'm computer: HP Compaq 6200 Pro Small Form Factor

  Hello:

  Try the driver directly from Intel.  The hardware ID you posted is for an Intel ethernet card.

  The first file listed is for W7 32 bit.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-

  I was going to ask...

  How did you couldn't get W7 x 64 install?

  I have an Elite 8200, which is the same model as yours, except that it's a chipset series 6 Intel a little better than you do.

  I had no problem installing W7 x 64 on it.

• HP Compaq 6005 Pro small format: error installing Windows 7 64 bit

  I install windows 7 64 bit, an error message, please guide me how to solve this problem

  

  thainguyenvl

  Hello;
  
  Let me welcome you on the HP forums!
  
  Unfortunately, the image you posted does not in the forum - then please provide the error text.

  We can proceed once you provide the information.
  
  Thank you

• HP Compaq 6200 Pro SFF: Opgrade Windows 10 - HP Compaq 6200 Pro Small Form Factor PC

  Hello

  I want opgrade Windows 7 Pro (64 bit) to Windows 10 Pro (64-bit) with a clean install.

  I am aware that I have to choose the UEFI mode in the start menu, but do I

  enable/disable in the BIOS before I boot the installation DVD?

  Concerning

  Knud Erik

  Hello sfinksen ;
  
  Let me welcome you on the HP forums!
  
  I read your post about upgrading your PC to Win10 and wanted to help.
  
  First of all, you do not ask UEFI install Win10 Pro 64-bit.  I installed on a desktop computer using BIOS and MBR and it works very well.  You're not even sure that a Mini-PC offers the possibility of UEFI?

  Then, personally, I recommend the update.  The problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  To further complicate things, the GoBack to Win10 function has been proven to be unreliable, so when people are trying to return to an earlier OS when it does not work, cannot leave the machine in a damaged condition, such as only a full factory reset HP recovery support it will get back to a working condition , and not only you have to buy only media, you end up losing all your data, settings, and applications in the process.
  
  However, you can protect yourself from this kind of problems if, BEFORE you do that, you consider using a third-party application Imaging/restoration as Macrium Reflect to image your machine off, so you can easily restore it if something does not work.  And don't count on the Win10 GoBack function back on Win7, it is not reliable and can leave your computer in a damaged state.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  In addition, a clean install of Win10 lights only in the following circumstances:

  1) using build 10240 (RTM), an upgrade in previous place was done and confirmed have activated.

  (2) using the updated 10586 (November), a valid before the OS product key has been entered.

  So, if you have decided to do a clean install, you'd better using the MS Media (MCT) tool: Windows Installer by using the tool of creation of media - 10 Windows help

  With this tool, you have the option of (1) creation of installation of Win10 (USB or DVD) media, (2) download an ISO file, (3) update the PC directly.  If all you want to do is updated on this PC, then choose the option: upgrade this PC now.  This tool automatically selects the generation 10586 - giving you the opportunity to enter a product key to activate it.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• PCI errors - Compaq 6200 Pro small form factor

  I had a major breakdown of the system OP, the new hard drive, the new installation of Win 7 Ultimate... everything works fine, except PCI Serial Port & Simple communications controller PCI in the... Device Manager showing the error

  I went to download drivers page and downloaded and executed every driver available but still have PCI errors...

  Help please & thanks in advance.

  JWalters

  Hello:

  You need this driver... install the driver manually if you need to.

  There are records of pilot for both devices.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037901&swItemId=vc_138955_1&swEnvOid=4059

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• Compaq 6200 Pro - serial port PCI does not

  Hello

  I have a problem with installing the correct drivers for HP Compaq PC 6200 Pro Small Form Factor,

  I can't get PCI serial port to work on Win XP...

  I tried all the official drivers on the HP support site.

  The PC came with pre installed Windows 7, so I'm downgrading to Win XP.

  
  

  
  

  

  Hello:

  It's like I initially thought... the AMT driver.

  Apparently, you have to manually install by clicking on the device in Device Manager, click on the driver tab, click on set to update driver. Select the driver manually search in a specific location, and then go to C:\ SWSETUP\sp52247 and install the drivers for this folder.

  Please read this post where I helped someone with a similar machine (the 6200 is a smaller version of the 8200) in the forum of business support. He could not get the driver to install by running the file. He had to install it manually, and it worked for him. So, it should work for you too.

  http://h30499.www3.HP.com/T5/business-PCs-Deskpro-Evo/8200-elite-PCI-serial-port-driver/TD-p/4835455

  You can use the drivers that I posted in the link above if you want to, but I think that they are the same.

  Paul

• Compaq 6200 PRO MT: Makes the computer does not start after upgrade CPU

  I have the HP Compaq 6200 PRO PC of MT 615114-001 motherboard and processor Intel Celeron CPU (LGA 1155). After I changed the CPU for Intel Core i5 (LGA 1155) computer does not start. He begins a minute (less than one second) and stops again. No beeps. After you have installed the Celeron back everything works fine. i5 CPU is brand new. What can be?

  In my previous post, I explained the reason it has not worked, and listed the CPU that will work.

  HP tests CPU in the laboratory and publishes a list of processors that will work in a notebook.

  Notebook motherboard BIOS has a list of processors that will work. If it is installed, which is not encoded as OK in the BIOS ROM file, then this will not work.

  Processors published (in the maintenance guide & Service for your nttebook series model) are available in models that can be deilvered in State CTO (configured to order).

• Memory RAM replacement hp compaq 6200 pro sff

  I have hp compaq 6200 pro SFF, now has only 2 GB of RAM memory and I want to add more to it. where can I find what I need? I have a couple of old computers here, but need to know if I can use these memoirs RAM for this computer. I can't find it.

  Hello:

  Here is the link to the quickspecs for your model...

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04123261

  Info upgrade memory are on page 7.

  Note that you can install 4 x 8 GB PC3-10600 memory, even if the configuration table only 4 x 4 GB.

• Invalid electronic serial number after swapping out motherboard, HP Compaq 6200 Pro SFF

  Hello

  I have just replaced a motherboard under warranty and I try to find the utility to change S/N in the BIOS, have obtained a location for the equivalent laptop but can't find the PC version using a USB.

  I have CSN access, but cannot find the utility appropriate to effect the change.

  PC is:

  HP Compaq 6200 Pro SFF

  Any help would be appreciated.

  Thank you

  Darren

  [Personal information]

  Hello:

  Here's what you need to do... This model has no need to inventory number or serial number change utility...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• HP compaq 6200 pro sff: drivers missing

  good day to all,

  help with the following missing drivers.

  controller Ethernet (hardware id);

  PCI\VEN_8086 & Dev_1502 & SUBSYS_1497 / 03C & REV_04

  Pci\Ven_8086 & Dev_1502 & SUBSYS_1497103C

  Pci\Ven_8086 & Dev_1502 & CC_020000

  Pci\Ven_8086 & Dev_1502 & CC_0200

  In addition,

  PCI simple communication controller

  SM bus controller

  PCI serial port.

  The PC is HP compaq 6200 pro sff

  Windows 7 pro 64-bit.

  Thank you.

  Hello:

  You need these drivers...

  SMBus:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_88640_1 & swEnvOid = 4059

  Simple PCI and PCI Serial Port:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_138955_1 & swEnvOid = 4059

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_108131_1 & swEnvOid = 4059 #tab1

• HP Compaq 6200 Pro MT PC: Error number SN

  Hello.

  I just replaced a motherboard on an HP PC Compaq 6200 Pro MT.

  The issue is that, once replaced it get an error "invalid electronic serial number".

  I tried the game that in the BIOS, but there is no other choice.

  I am aware that there is a DMI tool for laptop to set these parameters, is there one for the PC?

  Concerning

  Tyzer

  Engineer of the ASP.

  Hi, Tyzer:

  See if it works...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• How can I install my month Acrobat Pro XI to the version of the subscription month starting on another computer? All I can get is a trial version that requires a serial number...

  How can I install my month Acrobat Pro XI to the version of the subscription month starting on another computer? All I can get is a trial version that requires a serial number... when I go to download from my account it is still asking me to pay again?

  Hello

  There is no serial number associated with the subscription.

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• How can I re-download Acrobat? I have my serial number but the order does not come under the heading upward my story.

  How can I re-download Acrobat. I have my serial number but the order does not come under the heading upward my story.

  Hi Roger,

  You can download Acrobat from the below mentioned link:

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• How long can you install the CS6 pack with the same serial number?

  How long can you install the CS6 pack with the same serial number?
  I have a new computer and you want to install it again.

  I already install twice because I needed to re - install on my old.

  you are allowed to two simultaneous activations.

  If you disable (help > deactivate) a previous activation, you can keep your two simultaneous activations and essentially install/activate an unlimited number of times.

  [moved from Creative cloud download & install download, installation, commissioning]