Hp Compaq nx7000 laptop does support memory DDR2 SDRAM?

Similar Questions

• The Compaq Presario CQ41 does support 64 bit OS?

  I went in a chain retailer and I noticed the Compaq Presario CQ41 was running Windows 7 Home Premium 32 bit, but had 4 GB of RAM installed (which he could not fully use). The stafff I asked why and they said HP/Compaq laptops cannot run 64-bit.

  The Compaq Presario CQ41 does support 64-bit so it can used the entire 4 GB of ram?

  The Compaq Presario CQ41 will also support a 64-bit Windows 7 operating system.

• Equium A110-233 does support memory 667 mhz or 533 mhz?

  Hello

  I have a satellite A110-233 with a processor Intel Core solo processor. Sound of the Intel 945 GM Express chipset. Now, I have looked everywhere and just cannot know for sure if my computer supports at 667 mhz. I know that it supports 533 mhz...

  I'm after a new ram install and want to take advantage of the higher speed if he is cabable.
  Also, anyone know where I can get cheap ram? Pref kington etc.?

  Thank you!

  Hello

  I m not 100% sure, but it seems that the laptop supports a FSB of 533.
  So I advise to use the 533 Mhz memory modules.

  As far as I know Toshiba recommends the use of these modules:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  It seems that the modules are designed by Kingston. Usually Kingston modules are very effective in high-performance, but there is a little more expensive than the modules without name.
  In any case, I would always buy a module high performance, because the quality is much better

• CQ57-425ER: Compaq Presario CQ57 does support UEFI?

  I have Compaq Presario CQ57-425ER and you want to use Windows 8.1 GPT disk. I made a bootable USB key with Rufus (TPG-UEFI chosen option), but my laptop can not boot from the flash drive. There is a message - no boot device. Among the drivers for my laptop, I found an environment to help HP Unified Extensible Firmware Interface (UEFI).  Here is a description: ftp://ftp.hp.com/pub/softpaq/sp55001-55500/sp55477.html. I found 2 interesting points in this description: supports GPT disks and provides support for the installation of the UEFI System Partition. I tried to run this flash with windows on another laptop and it works fine. But in my laptop, I always get the message that there is no bootable media. Yes, there is a support of UEFI in CQ57? And if so, what should I do?

  Hello

  This model of PC has limited support for Windows 8/8.1.  It does not support the GPT or UEFI 2.3.1 or later version.  It is the MBR only.

  -wes

• Apple does support HDMI 2.0 on any MacBook Pro?

  I would use my monitor Dell 4 k with my MacBook Pro retina end 2013.  This laptop does support HDMI 2.0?  I would like to use HDMI at 60 Hz.

  Thank you.

  In itself, it supports HDMI 2.0! But apparently some did work with a Thunderbolt/Mini DP adapter HDMI 2.0: CDM HDMI 2.0 cards

• Satellite L30-134 does support dual channel DDR2 memory

  Does anyone know Satellite L30 does support two mode because I've got 2x256MB and a 512 MB all Micron MT modules?

  Wojtek cordially

  Hello

  Of course, the Satellite L30-134 supports DDR2 memory modules.
  I found a few listed on the Option & Accessories site of Toshiba Europe site:

  What are supported:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Satellite A60 does support Kingston 2 Gb 200pin Sodimm DDR2 PC2-5300 667 Mhz

  Satellite A60 does support Kingston 2 Gb 200pin Sodimm DDR2 PC2-5300 667 Mhz

  Thank you.

  Hello

  Satellite A60 supports PC2700 DDR SODIMM 200 pin like on this page says:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=8333&ft=m&St=3

  Only a single memory is expandable! So, you can use only one slot for an upgrade!
  You can use max 1024MB module and memory can be improved for max 1.25 or 1.5 GB. (according to the amount of memory the memory internal)

  The speed of the module can be different! I m not 100% sure, but I guess that the laptop supports a 533 MHz FSB (front side bus) and therefore, you can use the modules of PC2700 memory with 533 MHz speed.

  Best regards

• Re: My Satellite L500-19Z does support DDR3 memory?

  My Satellite L500-19Z does support DDR3 memory?

  In my view, it has 4 GB (2x2gb 200 pin 1.8 v DDR2 SoDimm PC2-6400) memory standard (800 MHz I think). I want to move to 8 GB and I saw the following offer: -.

  8 GB (2x4gb) 1333 Mhz PC3-10600 memory Kit.

  My laptop will support it?

  I hope someone can help.

  Concerning

  > My Satellite L500-19Z does support DDR3 memory?
  Say the user manual?
  Did you check that?

  The support of memory depends on the chipset.
  If the chipset does not support DDR3 so you cannot use it.
  The chipset is Mobile Intel GM45 Express Chipset and AFAIK that support DDR2 800 MHz 8 GB max memory chipset.

• Compaq CQ58 computer 301SA laptop does not connect to 50Ghz band on router

  My laptop does not connect to the band 50Ghz on my router dual-band. I know that my router Netgear dual band diffuse 24 and 50 Ghz, but the laptop only shows the 24 Ghz band depending on availability.

  I have a Compaq CQ58 301SA Notebook PC, Windows 8 (64 bit OS).  It has a Ralink RT5390R 802 11bgn network adapter and a Realtek ethernet network adapter. I use the laptop wireless, for example using the Ralink connection and it connects easily to the 24 GHz band, but I want to broadcast TV programs and movies smoothly, for which, I understand that the 50Ghz band is preferable. I pay my ISP (Virgin Media) for a connection to Super-fast broadband but my laptop seems to be limited to the 24 GHz band. Seems to be the case if I work with the adapter Ralink wireless or wired with Realtek ethernet connection.

  This problem can be corrected? If so, how? What I have done research on the web, the problem seems to be network adapters. Can they work on the 50Ghz band? Or do I need to download another adapter (if so, which?) Or use an adapter external network I plug into a USB port?

  Driving me crazy...

  Hello:

  The Ralink RT5390R 802 11bgn is a map of the only band (2.4 GHz) only.

  Whenever you see a labeled bgn wireless card, it is a single band card.

  Cards labeled dual band abgn or agn.

  The maintenance manual (Chapter 3, page 19) does not indicate that any internal dual band card is supported, so you would probably have to go with an external usb dual wireless adapter.

  http://h10032.www1.HP.com/CTG/manual/c03593268.PDF

• SONY VAIO F Series SVF15412CXB does support dual channel memory?

  SONY VAIO F Series SVF15412CXB does support dual channel memory?  Or is it only a slot?

  I'm curious to know if I can put a second stick of RAM in there for performance dual channel.

  Hi gremark,.

  I understand you want to be sure of everything. I checked the service manual for this model and even tried to open a laptop of the same type and I can assure you that this model supports the double delivery. You can add up to a stick more than 4 GB of ram to increase the memory capacity.

  ~ Mark

• Satellite A100-847 does support 667 MHz memory modules?

  I have an A-847 of Satellite with a Numtxpackets® Centimoa® Duo Mobile technology Numtxpackets® Corea? ¢ 2 duo processor T7200, Numtxpackets® PRO/Wireless 3945ABG network connection and Numtxpackets® 945 PM Express chipset
  Clock speed: 2.0 GHz
  FSB: 667 MHz
  level 2: 4 MB cache
  The memory is DDR2-533 MHz originally, I need to know if my phone supports memory 667 MHz modules.
  How do I know this?

  Hello

  Yes, your device supports 667 Mhz modules:

  http://www.Intel.com/products/chipsets/945pm/index.htm

  It is your chipset and if he takes care of so that you are able to work with these modules...

  Welcome them

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• Compaq Presario CQ5300Y desktop PC - memory upgrade

  Hello, everyone! I hope you are all well.
  
  I have a desktop PC Compaq Presario CQ5300Y, to which I would like to upgrade the memory.
  
  The product specifications indicate clearly that the motherboard, a M2N68-(Narra5), 2 x DDR2 memory media. (In addition, the amount of installed memory is 2 GB.)
  
  The product specifications, in the information section of upgrade memory also mention the following:

  -----------------------------------------------------------------------------

  Dual channel memory architecture
  Supports two DDR2 DIMM (240-pin)

  Supported DIMM types:

  PC2-5300 (667 MHz)
  PC2-6400 (800 MHz)

  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports up to 4 GB * on 32-bit PCs
  * 32 - bit operating systems cannot resolve a full 4.0 GB memory.

  -----------------------------------------------------------------------------

  I'm clear (with what the article said) I have only available two DIMM DDR2 2 brackets.

  "What confuses me is the statement" ""supports 2 GB DDR2 DIMM '. This is the reason for my question.

  "Supports 2 GB DDR2 DIMM" means that I have to use 2 GB DDR DIMM only, which means I can only go to 4 GB? Or could I use 4GB DDR2 DIMM, which breaks the barrier of 4 GB?

  In a few words, I would like to - at least - 8GB (assuming that I find two modules DIMM DDR2 4 GB). Would it be possible to have the above configuration?
  
  It is important to mention that the PC is running a 64-bit operating system.

  I would appreciate the attention he can draw on this issue.

  Best regards.

  Hello:

  Each slot of memory on the motherboard of your PC cannot accept that a maximum of one module of memory of 2 GB.

  1 x 2 GB will work.

  2 x 2 GB will work.

  1 x 4 GB will not work.

  2 x 4 GB will not work.

• The series Qosmio G20 does support PC2-5300?

  Hello all,.

  For some time now, I've thought about the possibility of an upgrade of RAM for my Qosmio G20 - 126 and all looking for a more economical way than that which is available via the Toshiba site (~ £100 for a 1 GB RAM Module!) I met articles suggesting that the Qosmio G20-126 is compatible with RAM PC2-5300 (333 MHz). To my knowledge the Qosmio G20-126 comes with 2x512MB PC2-4200 (266 MHz) modules installed, in addition to the direct available from Toshiba RAM upgrades are also PC2-4200. So my question for you, former scholars of the Toshiba support forum is simple; my laptop is REALLY compatible with PC2-5300? and if so there will be problems worthy of consideration (i.e. insufficient power supply etc...)?

  Also, I wonder if there are intrinsic advantages regarding the marked Toshiba RAM upgrades available via the site of Toshiba UK. I found the modules of RAM of the similar (at least as far as I can see) specifications for a third of the price. It would be also interesting to note that the model of module of RAM available here on Toshibas website is (according to Google products alias Froogle) same price when buying from third party suppliers (so it's not simply a question of margins exorbitant of Toshiba, unless of course the sellers are also defined on by the aforementioned increases.)

  Sincere greetings,
  Lee Hyde.
  ([email protected])

  Hello

  The Qosmio G20-126 supports a FSB 533 and, therefore, the PC2-4200 DDR2 266 MHz modules are! (DDR2 266 Mhz-> 533 MHz)
  It is absurd to use the RAM PC2-5300 DDR2 333 MHz due to the FSB. You won't see improvements in speed or performance.

  I wonder why you are surprised that Toshiba recommends the use of own products (memory sticks). I think that each manufacture recommend clean products!
  In addition, it is important to mention that brand memory modules are much faster and the performance is much better than the performance and quality of the nameless memory module.

  Of course, you can use all modules that supports hardware specifications, but the don t wonder about laptop performance and memory problems after the use of modules without a name!

  I use the modules of Kingston and I also recommend using these modules, because quality is really nice

• Laptop: laptop does not start

  My laptop does not start, how can he?

  Hey,.

  First, a good thing to try is a hard reset of the computer.  The steps are different depending on whether your battery is removable or not.  See http://support.hp.com/us-en/document/c01684768 for steps and videos covering this first easy step.

  If you are still having problems starting to walk through the steps in the troubleshooting online here documents:

  Windows 10 - http://support.hp.com/us-en/document/c04718479

  Windows 8 - http://support.hp.com/us-en/document/c03515402

  Windows 7 - http://support.hp.com/us-en/document/c01443371

  -wes