The Compaq Presario CQ41 does support 64 bit OS?

I went in a chain retailer and I noticed the Compaq Presario CQ41 was running Windows 7 Home Premium 32 bit, but had 4 GB of RAM installed (which he could not fully use). The stafff I asked why and they said HP/Compaq laptops cannot run 64-bit.

The Compaq Presario CQ41 does support 64-bit so it can used the entire 4 GB of ram?

The Compaq Presario CQ41 will also support a 64-bit Windows 7 operating system.

Tags: Notebooks

Similar Questions

  • CQ57-425ER: Compaq Presario CQ57 does support UEFI?

    I have Compaq Presario CQ57-425ER and you want to use Windows 8.1 GPT disk. I made a bootable USB key with Rufus (TPG-UEFI chosen option), but my laptop can not boot from the flash drive. There is a message - no boot device. Among the drivers for my laptop, I found an environment to help HP Unified Extensible Firmware Interface (UEFI).  Here is a description: ftp://ftp.hp.com/pub/softpaq/sp55001-55500/sp55477.html. I found 2 interesting points in this description: supports GPT disks and provides support for the installation of the UEFI System Partition. I tried to run this flash with windows on another laptop and it works fine. But in my laptop, I always get the message that there is no bootable media. Yes, there is a support of UEFI in CQ57? And if so, what should I do?

    Hello

    This model of PC has limited support for Windows 8/8.1.  It does not support the GPT or UEFI 2.3.1 or later version.  It is the MBR only.

    -wes

  • Tips to upgrade Compaq Presario CQ41-208AU

    Hello

    I bought a Compaq Presario CQ41-208AU, I actually bought for normal household use, but some games compatible DirectX 10 does not work well in this notebook, 3D images are well filtered and I get low rates.

    A particular game, I can cite is GTA IV, I play to the lowest possible resolution of 800 x 480 and again, get low frame rates. IM using Windows7 Ultimate 32 bit, on an AMD Turion II Dual - core M520, with 2 GB RAM system (1.75 GB usable) and a chipset AMD M880G with ATi Mobility Radeon HD4200. I know that the specification is very poor, so I want to update if possible. Can you suggest me if I need to chage the motherboard inorder to change the graphics card. I like the look of this laptop very much as he looks smart and I'm not thinking of changing, I'd rather spend the money to upgrade its interiors. Please help me and offer me on what material is appropriate for the DirectX 10 game at good pace.

    Sorry I didn't that I posted the Original qusetion in the computers section of office.

    Reyhan

    It is not just any way to improve the graphics. Even if you could buy a new motherboard with better graphics, when all is said and done it would be cheaper and way more easy to simply sell yours and buy one with the desired specifications. Even put graphics on the cards at level mothers CQ41 replacement is a Radeon 4350 I believe which is only a little better than you and the recommended full Board would require likely case mods to fit your laptop. Talk of earrings on a pig!

  • Compaq Presario SR5123WM does not turn on

    Compaq Presario SR5123WM does not illuminate. Green light on the back is the only one that lights up. Fans don't come on. It is plugged. No lights on the keyboard or the mouse. Haven't added a new hardware or software. the fans were working and the keyboard and mouse worked, but the monitor would not come on, now nothing.

    I thank very you much for the quick response. The instructions with the videos helped. It was the power supply.

  • HE commands to work - Compaq Presario SR5000 does not start

    I have a Compaq Presario SR5000 running Windows Vista Edition family basic and once we got in, I first cleaned the internals to the air compressed, then tried to start, and it failed, so recommended BIOS I run the Startup Repair tool and so I did, and the startup repair couldn't fix the computer "automatically".

    Now, I run the system restore and I tried to restore the computer to its last Windows Update, and I got the error code 0 x 80070002, meaning that the system cannot find the specified file.

    Specifications for the Compaq Presario SR5000 I have:

    AMD Sempron LE-1250 to 2.20 GHz

    2 GB PC2-6400 DDR2 SDRAM Samsung

    WDC WD3200AAJS 320 GB HDD at 3.0 Gbps

    Phoenix BIOS CMOS review 5.16 12/11/2008

    Windows Vista Home Basic

    HP M2N86 - THE mother

    Power supply PS-5251-08 LiteON 250W

    Well, if this is the case, then I think you may try to access BIOS, if that does not work then go ahead with the HARD drive option. I had this problem before and I wiped the hard and it worked eventually. If this does not work, I will try and find a different solution.

    -Steven Jacob Dallas, TX

  • Product key is not visible on the Compaq Presario v3239 laptop sticker YOU.

    Original title; my product key is not visible on my laptop sticker... Help me to get my product key

    compaq presario v3239 product YOU
    32 bit
    Windows Vista Home Basic Edition

    Hi Stifler,

    The product key is on the certificate of authenticity (COA) sticker provided by the manufacturer of the computer that is normally located at the bottom of your laptop.

    For more information, see the article:

    What is the certificate of authenticity for Windows?

    If you are unable to read the product key and the software is preinstalled on your computer, contact your computer manufacturer to obtain a replacement product key.

    How to identify, locate, and replace a product key

    Hope the helps of information.

  • Compaq presario c700 windows vista 32 bit lost all drivers and bootmgr but I have no discs to help me please

    do you have a factory reset on compaq presario c700 windows vista 32-bit lost all drivers and bootmgr, but I don't have any disks help me please

    Hello

    Here is the information of HP (Compaq) for recovery options for Vista factory settings.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

    See you soon.

  • Compaq Presario SR2180NX: The Compaq Presario SR2180nx can win 10?

    The Compaq Presario SR2180 with 4 GB of RAM (currently with Win 7, 32 bit) meets the criteria to run Win 10?

    Yes, it should, only potential problem is drivers, there is a link to check if there are drivers but it isn't currnetly work, bookmark and come back later.

    http://www.HP.com/windows10upgradenow

  • AMD Athlon II X 95W 3 450 processor compatible with the Compaq Presario CQ5700Y desktop PC?

    I was wondering of the AMD Athlon II X 95W 3 450 processor (ADX450WFGMBOX) compatible with the Compaq Presario CQ5700Y desktop PC? Thank you very much!

    Dr., welcome to the forum.

    Here is the processor upgrades that are compatible with the motherboard:

    • Max TDP: 95W

  • The model Interface Toolkit does support the cRIO-9068 again based on Linux?

    Hello, I have a cRIO-9068 and need to integrate a Simulink model in my controller. The model Interface Toolkit does support the cRIO-9068 again based on Linux? Besides, don't Veristand? This page assumes that it is not:

    http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751

    Thank you

    Hi Southern_Cross,

    Based on the readme:

    http://digital.NI.com/public.nsf/allkb/D3F40C101B66128186257D020049D679

    It seems that it is now supported! These resources should provide a few more details:

    http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/

    http://digital.NI.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055

    Please note that NI VeriStand 2014 can't stand it targets NOR Linux in real time.

    Kind regards

  • VCenter does support 32 bit address post?

    Hello

    IM installing vCenter on a 32-bit Windows 2008 with 4 GB of RAM.

    We intend to add more memory shortly.

    VCenter does support 32-bit address extension, is there any known issues?

    Thank you

    x 86 is not an identification for 32 bit, which is a hardware platform.  See release notes

    http://www.VMware.com/support/vSphere4/doc/vsp_esx41_vc41_rel_notes.html

    vCenter Server 4.1 supports installation on platforms Windows 64 - bit only. If you have VMware VirtualCenter 2.x installed, see vSphere Upgrade Guide for instructions on installing vCenter Server on a 64-bit operating system and preservation of your VirtualCenter database.

  • Compaq presario sr5010nx does not recognize cpu

    Hi guys my dad have a really crappy computer (cannot run the half-life 1) and I want to give him my old (also shitty, but less) which I use no more. I bought a new processor, an intel Core 2 Duo E4300 1.80 GHz 2 M 800 MHz processor LGA775 Conroe, which is on the list of caught cpu supported by the motherboard (945GCT-HM (Livermore)) on the website of intel. When I changed the cpu, apply the thermal paste and it started
    I got "ERROR: unsupported processor installed.
    PC will turn off automatically in a few seconds "message and I wonder why it does not work. Is it possible that the CPU is broken? I bought on ebay so it would not be surprising. I also changed the power supply which fried for a 550W and added the new ram, 1 stick of 1 GB and a 2 GB.

    P.S. I asked on another Web site and all they told me is get a better machine, please do not. My father is really not great matches and I don't have the money for her ^^

    Hello @Charlesesteban,

    I understand that you are having problems with upgrading the processor on your desktop Compaq Presario SR5010NX. Well well, according to the HP Support document: upgrade or replacement of the processor you have followed the steps correctly. The TDP for the original and intel processor Core 2 Duo E4300 1.80 GHz 2 M 800 MHz LGA775 processor are the two 65w so this isn't a problem. I suspect that you're right in that the new processor is faulty.

    I hope this helps. Thanks for posting on the HP Forums. Have a great day!

  • The Compaq Presario 2100 laptop SSD upgrade

    I have a laptop Compaq Presario 2100 it was brand new in 2003. I have a newer laptop, but a train trying to upgrade the Presario 2100 as much as possible. This is the kind of a project now and I also want to get as much as possible out of it. I heard that SSDS are super fast and would improve performance a bit. Anyone did the upgrade to an SSD for their Persario 2100 notebook PC series already? All entries are appreciated, in particular information about the product that was used for the upgrade. If no one did, so nobody knows if it is possible to upgrade the Presario 2100 series laptop PC to an SSD?

    Thank you

    Huck

    Believe it or not, the maintenance manual is always available.

    Manual

    The Presario 2100 uses old school PATA (EIDE) hard disks that are different from those of the SSD SATA see you more often on the market. However, there is a PATA SSD. They cost a bit more per concert, of course. I put a PATA SSD in a laptop on the same vintage as the Presario 2100 and it does significantly improve start-up time and overall performance, but talk about the proverbial earrings on a pig!

    This is a 64 GB SSD PATA that would be perfect for the Presario 2100, but $ 90:

    http://www.Newegg.com/product/product.aspx?item=N82E16820208893

    On eBay you will probably find 32 gig for a little less versions.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • An on-screen volume indicator has disappeared from the Compaq Presario running Windows 7

    I have a Compaq Presario CG56 with Windows 7 64 bit.  All of a sudden the volume display on the screen (NOT the taskbar icon) does not appear when I adjust the volume.  I don't change anything on the computer.  Any ideas?

    Hi again,

    If you do not want to install / uninstall anything, then you can restore your system to the point where you remember that visuals work ok.

    Resources:

    How to do a system restore in Windows 7

    When it will not work then you will need to use the solution to my previous answer.

  • missing Ethernet controller driver - compaq presario running windows 7 32 bit - HELP

    Hello. I have a Compaq Presario CQ5700Y desktop PC and recently installed a new version of Windows 7.  Now, I don't have a driver for the ethernet adapter. Looking for everywhere. HP website offers only one for windows 7 64 bit and mine is 32-bit. According to my device manager, my hardware to ethernet controller id is the following:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB7103C & REV_05

    PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB1703C

    PCI\VEN_10EC & DEV_8136 & CC_020000

    PCI\VEN_10EC & DEV_8136 & CC_0200

    Any information would be appreciated, as I am going nuts with this thing. Thank you.

    Hello

    Unzip and install:

    FTP://WebUser:[email protected]/CN/NIC/Install_Win7_7089_09222014.zip

Maybe you are looking for