HP d530 CMT stops responding during the recover program

Similar Questions

• Explorer.exe has stopped responding during the slide show.

  I am not sure what happened, but I was downloading of images for a slideshow and I didn't notice that my laptop has been restarted due to an update. I thought it would be to find until I started to run into an error with explorer.exe. When I go in the folder of the situation to show them as a slideshow of the pictures, the screen goes black, as it is supposed to and then crashes. From there on, I get a notification that explorer.exe has stopped working. Do you think the problem is a corrupted image file should I remove? It doesn't bother me if I have to because I know where to find them again.

  Hi WyldFyre254,

  I would suggest trying the following steps and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly or may prevent Windows from starting correctly.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Step 2: Recreate the slideshow and check that it works very well.

• My keyboard stopped responding during the installation of Windows XP.

  Reinstall windows xp - keyboard unresponsive

  I'm reinstalling XP from an official CD after reformatting the HD.  On the Welcome to Setup screen, where I need to press ENTER to set up XP, nothing on the keyboard gets a response (type F3, R).  It's as if the machine has ceased to recognize the USB keyboard, even if it worked in the previous steps.

  I need to find a different type of keyboard?  Thank you.

  Check the back of your computer and search for PS/2 (round) connectors to your mouse and your keyboard.  Older computers used these PS/2 connectors, as the main means to connect to the keyboard.  USB drivers for USB devices (including the keyboard and mouse) were not in the BIOS and USB could not be used until Windows provided drivers for these connections.  You can borrow a PS/2 keyboard, until you download Windows loaded, or you can buy a small adapter that will plug into the PS/2 computer connector so you can connect your USB keyboard to the other end.  Once Windows loaded, you can return to your keyboard and USB mouse.

  HTH,
  JW

• Keyboard stops responding during the game

  Hi, a problem began to occur with my keyboard. When I play a video game, some of the keys become very insensitive, forcing me to push down extremely hard on them to make them work. Once I left the game, the problem resolves after a few minutes, and the key issues work fine again. Can anyone suggest what is the cause and how can I solve this problem? Thank you!!

  My computer:

  Dell XPS 700

  Home Premium Vista 32

  Intel Core 2 Duo 6600

  nVidia 8800 GT

  4 GB of RAM

  Hi quartet1977,

  ·        What is with all of them or any game in particular?

  Try the steps listed in the link below: Troubleshooting wired keyboards that do not or only the category of evil characters:http://support.microsoft.com/kb/258826

  To install the latest drivers you may refer the below link:http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=17&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=XPS_700&hidos=WLH&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Smartphones from blackBerry Curve 8530 has stopped responding during the wipe - I'm in trouble!

  Hey Gang,

  I'm in a bit of a jam and I hope someone here can help. I searched the forum for an answer but couldn't locate one.

  I have a Blackberry Curve 8530 and he knows some from time to time to gel.

  Model: BlackBerry Curve 8530

  Carrier: Koodo Mobile (Canada)

  Software version: Bundle 5.0 1108

  I decided tonight to backup all my data and do a "Wipe of security" in the menu options.

  I selected these two options, type "blackberry" and clicked on "wipe".

  I currently have the popup on my screen that says:

  "Deleting information...".
  WARNING: do not pull the battery until the erasure is complete. »

  On top of this popup is the formidable clock Blackberry with him will hand turns around and around (like an hourglass would be on a PC when it is "thought").

  

  It has been like this for nearly two hours now and seems to not react any longer.

  UPDATE:

  OK... good news... of all kinds...

  The phone has finally turned on and proceeded to go up through the deletion process and it now on the home screen.

  Now, the only problem is that when I wiped it off, the programs that I had downloaded previously are still on the device so it didn't completely wipe it off as I intended.

  I'll try another rag and hope for the best.

  See you soon!
  Jeff

• Acrobat XI stops responding during the application of document samples

  Very frustrating to try several times to redact information from multiple documents.

  I mark some words for the redaction.  Then I apply the redaction.  The application of document redactions starts but freezes / crashes a few seconds of starting.

  I can finish the task by using the Task Manager and when I reopen it Acrobat, it gives me the option to open the previous document.

  I waited for Acrobat apply the redaction as long as 3.5 hours with no luck.

  All this experience?  Anyone have any ideas on how to get Acrobat to apply the redaction rather than crash?

  Thank you

  edsager

  With the help of:

  Windows 7 64 bit

  8 GB DDR3 1333 MHz RAM

  Acrobat Pro XI

  

  Acrobat just updated, must have been just to solve this problem, because the version has not yet changed, and the problem is now solved!

• in autocad, 2012, if I get any command, the screen goes black and 1 "after return and display this message"display driver stopped responding and has recovered,

  "display driver stopped responding and has recovered, display driver Intel Accelerator for windows 7 (R) is not responding and has successfully recovered".

  My loptop is a HP Pavilion dv7 i7 intel procesor, 6 GB ram, graphics card intel HD3000, 64-bit

  Have you checked for any display driver later by the manufacturer of the graphics or your machine?

  You have a display driver earlier that you can 'Dismantling' to?

  Using the feature to restore the driver for Vista (or Win 7)
  http://www.Lockergnome.com/Windows/2007/09/21/use-the-driver-rollback-feature-of-Vista/

  AutoCad can run in Mode without failure?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried right clicking on the shortcut to the AutoCad program, or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• Satellite L500 - display driver stopped responding and has recovered

  Hello

  I have a concern about an error in my pc...

  the error is "display driver stopped responding and has recovered."

  I had been reinstelled the windows as well as search apdated inter display driver

  but I did not...

  I appreciate all advice and guidance about this problem...

  Thank you very much

  Something like that happen on my machine, but not so often, especially when I want to see video content in the browser.
  The reason why it knows me not, but I'm worried about this until the driver is recovered and I can use my machine as usual.

  Have you noticed if there is a particular situation when this happens?
  T happens quite often or just from time to time?

• Display driver stopped responding and has recovered

  Product: HP Pavilion dv7-6015tx Entertainment Notebook PC

  OS: Windows 7 32-bit

  Status: Clean installed Windows 7 Ultimate 32 - bit Windows 7 Home Premium 64-bit

  Hello

  I had several cases where the computer seems 'lag '.

  then, after a few flickers on my screen, Windows would give the error:

  "Display driver stopped responding and has recovered."

  There are still effects after this message.

  When dragging windows, scrolling top-down graphics etc. continue to Flash.

  This isn't all in hardcore, the GPU was not operating at high temperatures.

  Interestingly, I don't have this problem when I'm in the middle of hardcore games.

  The CPU was not under heavy load, the CPU was not working at high temperatures either.

  I checked the temperature with thermal control (HWiNFO32).

  I have a lot of resources, 1223MB of RAM to spare.

  I also have lots of HARD disk space too.

  I installed the latest version of the graphics driver for my product: AMD graphics driver high definition,.

  but the problem persists.

  Help, please!

  -John

  I understand your frustration, I had the same problem, I really did, for centuries!

  Try this:

  Do not go on the AMD website for a video driver. those who do not work properly for some reason any...

  Download on the HP site specific to your HP product, for example, I have a dv7 6015tx with 32-bit windows.

  Then I'd go to: dv7-6015tx drivers

  If you still have the drivers on AMD ATI Web site, uninstall them, restart.

  Go to the HP site where you can find specific drivers for your product HP, installation, restart.

  It seems trivial, but it's IMPORTANT and most of the time to restart after uninstalling and installing.

  It worked for me, hopefully it will erase your questions, good luck.

  -John

• Pomp L855 - 11 p: AMD driver stopped responding and has recovered

  Hello
  I bought a Sattelite L855 - 11 p a day ago. Since it first started, I have a problem with the ATI driver. At the time at the time, the PC is locked with yellow dots on the screen, and about 10 seconds later, I get following error messages for Windows 7 64-bit:
  -Display driver stopped responding and has recovered
  The AMD driver did not

  The PC is just out of the BOX.
  Toshiba updates: Assist and BIOS
  In addition, updates of Windows 7.

  Any ideas?
  Driver package: 8.932.5.3 - a-132503C-Toshiba 120120
  CCC Version: 2012.0120.420.7502
  OpenGL Version: 6.14.10.11411
  Direct 3D Version: 7.14.10.0889

  CPU: AMD Radeon HD M 7670
  BIOS version: 013.012.000.041
  Reference to the BIOS: BR42875.003

  Satellite:
  BIOS v1.60
  Windows 7 Home premium SP1

  Thanks in advance

  Large.
  Thanks a lot for your ad and your solution. :)

• Qosmio G50-10 q - driver has stopped responding and has recovered

  My father has a Qosmio g50-10 q for more than a year, and as he bought it he could not see the videos with a resolution more than 640 * 480 and preview of the photos by right click on them and select Preview.

  The problem exists on the operating system preinstalled Vista and today Ive tried to install an operating system windows 7 Professional 32-bit edition.
  The problem is he stil.

  I downloaded the drivers from the official website of toshiba.
  After a lot of testing, I downloaded nvidia nvidia drivers but the problem is exactly the same.
  I am a COMPUTER expert, but I've never found a problem not solved like this.

  I can not even go on youtube and watch a video in full screen.
  Whenever I try to play a video, the screen will start to Flash and then the video becomes black and a notification that says "display driver stopped responding and has recovered".

  I can't even see the video demo in the video folder of windows (wild life).
  And the situation really strange when I click with the right button on an image and select Preview. It shows a white or a black image.

  If I press the button of the screen adjustment, the image appears, but when I go to the next pixture I can't see him again.
  If I choose to see a presentation full screen, I can see all normally.
  Its really frustrating for a laptop of this award and I don't know if this problem is drivers or the 9700 M GTS was defective from the start.

  I hope I can find an answer here before I return it to Toshiba

  Thanks in advance

  Hi mate

  I had the same error happened on my laptop satellite.
  The display driver crashed and recovered
  I've updated the display driver and this has solved my problem.

  In your case, it of really strange that you can not watch movies in 640 * 480 or higher
  Maybe you need to update the BIOS. Check if there is a newer version
  If so, then an update of the BIOS would be worth a try

  Sorry, but I have no other recommendation for you outside the update driver as mentioned it has helped in my case

• Re: Qosmio X 500 - 11Z - display driver stopped responding and has recovered

  REF: PQX33E-02J00TCZ

  Hello, I had this problem:

  my friend bought new Qosmio for games... and the problem is with the graphics card Nvidia GT 360 M
  graphics card says this: display driver stopped responding and recovered... the screen flashes twice and its ok.
  its when I start windows (windows 7 HP 64 bit) or when I click in the Device Manager on the graphics card, on Internet when I surf... ordinary work, anything heavy for laptop as this :-)
  I changed my driver - standard uninstaller, then clean the pc with cc cleaner and install new drivers
  error still persists to say that...

  I tried the drivers nvidia and support toshiba official. the same two. problem remained.

  can anyone help?

  Hello

  To be honest, it is one of the most annoying problem in this forum. You can find many threads dedicated to, display driver stopped responding and has recovered, problem. There is no good solution for it. I solved this problem by installing a driver from nvidia.com site viewing, but I Gt 230 m. Don't know if this can help you too...

• Display driver igfx has stopped responding, but has recovered, blue screen with a Bcc Code of 117.

  Original title: igfx display driver

  I keep getting a message "the igfx display driver has stopped responding but has recovered.  A few times, it goes to a blue screen.  I'm not playing games when that happens.  My history of problem says it is a LiveKernelEvent with a Bcc Code of 117.  It began in May 2010 and continues.  I checked my driver and it is updated, or so it is said.  There must be some type of conflict.  All solutions?

  This might work, keep in mind this is a templete response

  Problem: something which called TDR auditor monitors for computer hardware, particularly the GPU, is tell the GPU constantly meet with computer for 2 seconds checker TDR restarts the driver. The TDR auditor has been good on paper but does not work in the real world. as a gpu may stop responding when he works hard.

  Issue since the time of vista, this is why this problem virually never happened on XP

  Here is the solution
  Exit all Windows-based programs.
  Click Start, type regedit in the search box, and then double-click regedit.exe from the above results. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002 (sometimes called ControlSet001) \Control\GraphicsDrivers

  On the Edit menu, click New, and then select the following registry value in the menu drop-down specific to your version of Windows (32-bit or 64-bit):

  For 32-bit Windows
  Select DWORD (32-bit) value.
  Type TdrDelay as the name, and then press ENTER.
  Double-click on TdrDelay and add 8 to the value data and click OK.

  For 64-bit Windows

  Select QWORD (64-bit) value.
  Type TdrDelay as the name, and then press ENTER.
  Double-click on TdrDelay and add 8 to the value data and click OK.

  Close the registry editor, and then restart your computer for the changes to take effect.

  This puts a delay on the auditor of tdr of 8 seconds, so the gpu may stop responding for 10 seconds, this usually fixes the problem, if you are still suffering from this problem (after a reinstall of the drivers or updates, you know this annoying driver stuff)
  To do this, do the same thing but instead of the 'TdrDelay' 'TdrLevel' type, enter the value data as 0 (it is on natively, but check) and then delete the TdrDelay.

  Restart

  Which turns off completely Tdr checker, so windows now 7/vista/8 now works more like windows XP

  Share the info XD

• Display driver nvlddmkm stopped responding and has recovered successfully after sleep, and then blue screen

  original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.

  Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.

  update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/