Explorer.exe has stopped responding during the slide show.
I am not sure what happened, but I was downloading of images for a slideshow and I didn't notice that my laptop has been restarted due to an update. I thought it would be to find until I started to run into an error with explorer.exe. When I go in the folder of the situation to show them as a slideshow of the pictures, the screen goes black, as it is supposed to and then crashes. From there on, I get a notification that explorer.exe has stopped working. Do you think the problem is a corrupted image file should I remove? It doesn't bother me if I have to because I know where to find them again.
Hi WyldFyre254,
I would suggest trying the following steps and check if it helps.
Step 1: Start the computer in safe mode and check if the problem persists.
Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly or may prevent Windows from starting correctly.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.
Step 2: Recreate the slideshow and check that it works very well.
Tags: Windows
Similar Questions
-
Smartphones from blackBerry Curve 8530 has stopped responding during the wipe - I'm in trouble!
Hey Gang,
I'm in a bit of a jam and I hope someone here can help. I searched the forum for an answer but couldn't locate one.
I have a Blackberry Curve 8530 and he knows some from time to time to gel.
Model: BlackBerry Curve 8530
Carrier: Koodo Mobile (Canada)
Software version: Bundle 5.0 1108
I decided tonight to backup all my data and do a "Wipe of security" in the menu options.
I selected these two options, type "blackberry" and clicked on "wipe".
I currently have the popup on my screen that says:
"Deleting information...".
WARNING: do not pull the battery until the erasure is complete. »On top of this popup is the formidable clock Blackberry with him will hand turns around and around (like an hourglass would be on a PC when it is "thought").
It has been like this for nearly two hours now and seems to not react any longer.
UPDATE:
OK... good news... of all kinds...
The phone has finally turned on and proceeded to go up through the deletion process and it now on the home screen.
Now, the only problem is that when I wiped it off, the programs that I had downloaded previously are still on the device so it didn't completely wipe it off as I intended.
I'll try another rag and hope for the best.
See you soon!
Jeff -
original title: explorer.exe has stopped working
whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.
Hello
The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.
Refer to this article for help:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.Kind regards
Afzal Taher
Microsoft technical support engineer -
Explorer.exe has stopped working
Original title: explorer.exe
My explorer.exe has stopped working several times and I tried to start in the Task Manager, but he tells me that he has ceased to work every time
Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.
Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior. If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.Try a clean boot, or boot into safe mode. The behavior persists?If you continue to experience the problem, consider creating the hierarchy of following registry keys in the registry:HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata. Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen. It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrive file and provide a link.(Letter is an environment variable that represents the system drive, usually C:.) -
My computer has stopped responding to the parameters in my power options tool.
My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes. But it does not follow these parameters. He just continues to run.
original title: Auto standby until the day beforeYou can try to change the settings, see if they meet the new settings and then change back to your desired configuration.
Please give some more information:
brand and model of the pc
current antivirus
Operating system and service pack
Also this system to be free of infections:
Download, install, update and scan with these full free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner
After return with results and INFORMATION.
-
HP d530 CMT stops responding during the recover program
HP d530 CMT stops responding during the installation phase. With the restoration of original hp more cd drive and operating system came with the computer, but it stops on the phase of installation at 35 minutes. Did the restore process several times with the same results. How return the computer to its original configuration?
Hello:
The keyboard should not matter.
You can open the case and remove the plug on the second CD player.
If the PC Restore, closed right down and plug the power cable back in the secondary CD and XP must discover and install it.
If you live in the United States, you can buy another game for $10 for your PC recovery discs if they are still available, by contacting CV at 1-800-334-5144.
Simply provide the model # and serial number.
Otherwise, you will need to install XP Pro (I guess that's what the license is for) with an XP Pro OEM installation disc and use the product key on your PC to activate it.
You may not use any other type of installation disk to use the product key that is on the PC.
Paul
-
I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.
I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.
=======================================
Just some thoughts...It may be useful if you are going to... Tools / Options / Compatibility tab...
and uncheck all filters.Also... it might be a compatibility problem with your source files...
(videos / photos / music files)Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv or dv - avi
Music - wma, wav, wmvAlso... If it is a large complex project, you could have a system
the question of resources. The answer would be to create
more modest projects.Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Windows 7 Ultimate explorer.exe has stopped booting automatically
Hi, my brother has an Optiplex 720 or 780, don't remember exactly. I just reformat and reinstalled the Windows 7 Ultimate 32 bit about a week ago and installed all Windows updates. Everything seemed fine until yesterday, when he said that he went to for use and he was just a black screen with the mouse cursor. After checking the internet, I discovered that the explorer.exe process is missing from the Task Manager. I am able to start explorer.exe in Task Manager myself, but how to get Windows to do as it should? There are no errors related to the problem at all.
Here's what I've done:
System Restore did not fix the it.
It does the same thing in safe mode.
Video drivers are to.date according to Windows Update.
In regedit, explorer.exe is next to the shell
There was never any antivirus installed on this installation
Any help would be greatly appreciated, thank you.
If you had any antivirus installed don't then its probable infection. Clean install Windows 7 after wiping disk preference...
http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/
http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-7/
Then use the Windows 7 upgrade license to Windows 10:
http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/
-
Hi gurus of the Oracle,.
I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe
ggsci.exe has stopped working
If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)
1. stop all processes Ogg
2. has taken the old OGG home backup
3. call the YES program and gave the location of the OGG existing House 11 G
4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.
If someone has solved this problem. Please help me.
Best regards
Jamsher Khan
I strongly suggest to talk to support.
-
Windows 7 64 bit Ultimate - Explorer.exe has stopped working (AppCrash)
It happens when I open the readers (problem happened in 2 of the readers). Windows exporer just stop working and restarting Explorer, but nothing worked I looked out in the net for the solution. the window displays:
Problem event name: APPCRASH
Application name: Explorer.exe
Application version: 6.1.7600.16385
Application timestamp: 4a5bc60d
Fault Module name: ArcSpl.ax
Fault Module Version: 2.4.2.45
Timestamp of Module error: 448f57ee
Exception code: c0000005
Exception offset: 0000c28a
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information 1: a7aa
More information 2: a7aa91f17ea749d42a4de3b390fa5b3d
More information 3:a7aa
More information 4:a7aa91f17ea749d42a4de3b390fa5b3d
Please, give suggestions so that I can fix my PC.
Error to ArcSpl.ax as the failed Module points. This module belongs to the ArcSoft MPEG splitter program. The module goes back to Wed Jun 14 00:27:26 2006 and is probably not compatible with Win7.
Please uninstall the ArcSoft program and see if that stops at the AppCrashes. -
game Launcher has stopped working during the loading of Oberon
Game on my WIndows Visa Launcher has stopped working when I tried to load a game of Oberon
jbradshaw_5
If you experience the issue where game Launcher stops working when you try to load a game Oberon, follow these steps:
1 left-click on start
2 - right click on computer
3. left-click on properties
4. left click on advanced
5 - running, click settings
6 - left click on Data Execution Prevention)
7 - click on turn on DEP for essential windows only and services programs.
8. click on apply and then OK.UAC: (User Account Control)
Open Control Panel, and then open user accounts.
You will see the link for "turn User Account Control (UAC) or not". Until it clicks.
Uncheck the box and restart your computer.It is just a suggestion, try and let us know if it works for you.
Thank you, Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Display driver has stopped working during the game the Sims 3
Original title: video card? With the Sims 3 ~.
I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.
-Poprocks26
I thought about it, are not even worry about this.
I just needed an update from Intel. It works perfectly now. :]
-
RelavantKnowledge has stopped working during the installation of updates
Running Vista Basic. SP2.
Dell Inspiron 1545 laptop computer.
Downloaded updates about 4 days ago and now it will not start completely. I get an error message saying "RelavantKnowledge has stopped working". Windows checks a difficulty, find nothing and charge the top tool bar, but NO Office, NO start menu. I tried to go to the Windows Update site directly to redownload and reinstall updates, but of course, this is no longer an option. Help!
-
Toshiba 40RL953B has stopped responding to the remote control
Hi all, my first post and this is a problem.
I have a 3 years 40RL953B Toshiba tv that is not responding more to the remote and the buttons on the side, it is stuck on HDMI 2 port and works well with deviced plugged which, but I have no control of volume or something else.
I was wondering if replacing the main Board it would heal or there at - it another way?
The closest Toshiba repair center is 45 miles away and I don't want to spend a fortune on a 3 yr old TV that does not have the quality of great pic of anyway, but still, I don't want to just Chuck... 4
Thanks in advanceHi all, I have a 40RL953B Toshiba 3 yr old 40 "Smart TV TNT HD, the problem is that he is stuck on HDMI 2 port and will not respond to the remote control or the buttons on the side. It does not work with something plugged into HDMI 2 but I have no volume control, it's ok when woking with a set-top box with no nut no good with the likes of a stick of fire from Amazon.
What is a defect of the main card? Or y at - there a way to reset the system?
Thanks in advance -
My keyboard stopped responding during the installation of Windows XP.
Reinstall windows xp - keyboard unresponsive
I'm reinstalling XP from an official CD after reformatting the HD. On the Welcome to Setup screen, where I need to press ENTER to set up XP, nothing on the keyboard gets a response (type F3, R). It's as if the machine has ceased to recognize the USB keyboard, even if it worked in the previous steps.I need to find a different type of keyboard? Thank you.
Check the back of your computer and search for PS/2 (round) connectors to your mouse and your keyboard. Older computers used these PS/2 connectors, as the main means to connect to the keyboard. USB drivers for USB devices (including the keyboard and mouse) were not in the BIOS and USB could not be used until Windows provided drivers for these connections. You can borrow a PS/2 keyboard, until you download Windows loaded, or you can buy a small adapter that will plug into the PS/2 computer connector so you can connect your USB keyboard to the other end. Once Windows loaded, you can return to your keyboard and USB mouse.
HTH,
JW
Maybe you are looking for
-
Satellite A300 - TEMPRO does not open links for updates
Hello I have the SATELLITE A300-1QDSerial number Y8805054QPSAGCE-06E02DGR model numberBTO CodeT5800 / 2G / 2 G / 320 G/15WBT/DS2/L /.OS is Vista Home premium. When you try to download updates from the driver through Toshiba TEMPRO link DETAILS of the
-
How I distributed text multi cells
3.6.1 the work number. How to enter text and spread it over several cells.
-
Recurring Windows Update installations
Recurring updates Windows show the complete installation. I have Vista 32 bit and recently installed BitDefender Security Suite. Following the suggestion of Marilyn: when it came to type the %... % to change the name of the file, which is where I w
-
How all the messages can be deleted in Windows Live Mail?
In Windows Live Mail, we can dump the unwanted and deleted mail folders. I want to empty the messages and can not find any help.Maggie472
-
HelloI need to create a WebHelp project file and a file of printed document. Firstly, I would like to generate the word and then to create the pdf file in Word. Is it possible to generate the help file in a specified Word template and have the styles