HP dc7700 vpro: cache dc7700 problem

Similar Questions

• Cache controller problems

  Cache on sc8000 controllers card issues

  Since the upgrade of SC40 sc8000 controllers I had 2 cards replaced cache.

  Speak for field technicians, it is frequent, as they are ask to reset the cards first before replacing them.

  The location of the memory card hidden in the slit located 7, over the block of power SUPPLY 1 and a SAS card is installed above the memory card slot 6 cache, it generates it cooling problems affecting life of the card?

  We have no problem and Compellent in the field systems which filled all of the PCIe slots. I think I saw a cache memory card failed once on a SC8000 (newly delivered system within 24 hours of operation).

• Suite cache viewer problem

  I have FF ver 19.0.2. I downloaded cache viewer suite 0.9.3 and it shows in FF addons.
  However, the button for the cache viewer does not show in the toolbar, so I can't use it...
  I tried to remove and reinstall, it happens the same thing.
  How can I get the continuous button cache viewer to appear on the toolbar?
  I got it on older versions of FF, and it worked (also an earlier version of the cache Viewer).

  The module Bar shows?

  https://support.Mozilla.org/en-us/KB/add-on-bar-quick-access-to-add-ons

• Files duplicate being created on the data with the active cache host store

  Updated the following this weekend:
  Discovers the connection Server 5.1.2 - 928164
  View composer 3.0.0 - 691993
  vCenter 5.1.0 b-947939
  a-838463 5.1.0, ESXi

  After the upgrade, I installed the latest tools in the virtual machine, see Agent 5.1.2 - 928164 and the driver audio Teradici on my shot.  I have not updated the machine hardware version.

  I enabled host hiding on my pool, and the pool is set to refresh immediately on logoff.  When I stop or disconnect from the session to view, I see an error in vCenter like this:

  Reconfigure virtual machine VMPool-3 cannot complete the operation because the file or folder [VM_POOL_LUN 12] VMPool-3/VMPool-3-mark - point.vmdk already exists

  Then it creates a new folder with a _1 on the store of data for this reason:
  VMPool-3 (original)
  VMPool-3_1 (duplicate)

  Once I turn off host cache the problem does not occur.

  Has anyone seen this problem?  I currently have a ticket open with VMware.

  I upgraded one of my sites to view 5.3 w / vCSA 5.5 and 5.5 ESXi and this problem no longer exists.

• some sites seem unable to run JavaScript, even when it is turned on

  I noticed this in the beginning with FF10ESR, but it still occurs with the version 18.0.2. This is done on the cheezburger.com site, and I get the following message:

  Oops! It seems that JavaScript is disabled. Load flow anyway!

  Some features still work, but others do not. This is a recent incident; I don't remember the problems last year.

  Thanks for any help you provide.

  Clear cache corrected problems

• That means Firefox by "broken certificate"?

  I have a site that gives security WARNING 'impossible to obtain the status of identification for a given site' and then do not grant an exception. But only on some machines. It's OK in both Linux running 10.0.4 machines that it fails, in another one with 10.0.4. In fact, with most of the machines I tried, it's OK, and I can give a marked exception as "unsaved."

  I have traced the error in the source code, but lost the trail to gBroken in exceptionDialog.js
  If I look at the certificate with OpenSSL, it parses OK as X 509 version 1.

  I narrowed down it somewhat.
  If I create a new profile, there is no problem.
  I had trouble to access any page on the server, for example https://example.com/robots.txt, https://example.com/foobar
  I found an entry in the cache for https://example.com/ which is in reality a 301 moved
  response, and that includes a long security-info: string in base 64.
  If I clear the cache, the problem goes away - I get the challenge and it can grant a waiver. If I restore the profile and the cache from a saved copy, the problem reappears. I don't am not sure of what represents the State stored in the cache, because I play too much with the certificate on the server and had not documented when I had changed.

  If I go to https://example.com/robots.txt and use the refill, or shift-reload (which, as I recall would normally get a new copy independently cached copies), it does not help.

  When the problem occurs, I can't retrieve the certificate using Firefox. There is no intermediate certificate, it is self-signed.

  I had this problem on 3 machines. On one, I cleared the cache without saving it first, that fixed the problem. A third, running SeaMonkey, I presume still has the problem, and I assume that it can be fixed by disabling the cache.

  (later)
  The question appears if a HTTPS redirection is cached, and then passes the server (self-signed) certificate
  Clear the entrance of the cache solves the problem.
  I filed https://bugzilla.mozilla.org/show_bug.cgi?id=767611

• Reorganisation of our group

  We currently have a group with a pool of storage ('default') and two members:

  -PS4100, NL - SAS 7200 RPM in RAID 10 (smallest Member)

  -SAS PS6210, 10,000 RPM in RAID 50 (largest Member)

  I would like to convert the two members to the RAID 6 (to gain some space and increase the reliability of RAID) while at the same time, separate the members so that they operate independently for volumes are is no longer "striped" on the two members.

  In the case where a member fails I would make sure the volumes on the remaining Member remain online and accessible.

  I have enough free space in the group to remove the smallest Member and move all volumes for the largest Member during the migration process.

  My idea is to:

  -create a new pool and move the smallest Member in this pool (this should move all volumes for the largest Member).

  -change the RAID level on the smallest Member (at this time, all volumes should have been evacuated from this member, by the action of moving pool)

  (- back some volumes of the largest Member of the smallest Member / the new swimming pool)

  -change the RAID level on the largest Member

  This work and this will leave completely independent volumes on each Member, or do I need to divide the members in their own groups to create a complete independence?

  Hello

  You have correctly.  Simple members in their own pool, do not share data so that only the defaulting Member volumes will be affected.   When you move it 4100 would be the right time to update the firmware on the Board and check to see if the firmware of the player needs upgrading as well.  There is a new firmware of drive kit, v9 available on the site.

  You must also upgrade the 6210 to match of course.  6210's must run 7.1.9 or 8.1.1 to avoid a possible cache synchronization problem.  So the 4100 will need to have the same firmware.

  Kind regards

  Don

• Strange connectivity issues

  Last week, I had intermittent problems with connectivity on my PC which is connected to the router via ethernet.
  I use a mixture of Chrome & IE, Outlook for email and more. What happens is some pages don't is not loading (for example: I can't open gmail in IE, but I can't in Chrome), Google Talk connect (guard saying reconnection), Outlook says "disconnected" a lot of the time and so I can't send or receive mail during these periods. On the other hand, most of the sites properly.
  Things I've tried:
  Restart the PC
  Restart the router
  Disabling virus/malware protection temporarily
  Running a malware scan
  The call of the ISP
  Reset all the settings of the browser and disabling modules
  Flushing the DNS cache
  Problem has not been resolved.
  I have a laptop where everything works then I know it's specific to my PC.
  Any suggestions welcome

  Thanks for the suggestion. In fact, I worked on what it was, it was a program that I am required to run to access the home office network called FortiClient. I was not using the program, but it ran on the bar of tasks, and as soon as I closed it, all my problems solved network! It was strange because I had this program for 2 months before that and hasn't caused any problems.

• I did updates in Bridge and Photoshop but now Camera Raw custom to treat my D610 Nikon RAW files.  I did the update this morning, ACR still does not.  Help!

  Help, please.  Last night, I did the update prompted by my subscription creative cloud and files where viewable and editable in Bridge and Camera Raw yesterday cannot be converted today.  Small thumbnails of some of the images are visible in the bridge, but not all.  And none are adjustable in Camera Raw.

  I restarted my PC.

  Still no change.  I did another update of the bridge and then restarted.

  No change.  I did the update to Camera Raw 9.1 then restarted.

  Still no change.

  It is huge for me time burden as I have jobs and assessments due.  Please tell me what to do.

  Support had me ctrl + alt pressed I open the bridge.  It has a reset option.  Once I reset and purge the cache location problem has been resolved.

• Audio cobs (POP) while rubbing.

  I work for the Adventist Frontier Missions, which has a subscription of the CC. I've recently updated to first Pro CC at first Pro CC (2014) and so far have not had nearly as many questions as others. Yesterday, we recorded a few voice-over, I brought in my editing with a few images, edited everything and adjusted the audio levels. No problem at all. I saved the project at the end of the day, stop the Mac Pro and went home. I went back today and to the resumption of the project. As I began to scrub through the timeline I had this horrible pop in my good speakers above 0 db and saw the spike in first level monitor... I had this happen several times before in the past. Usually to restart the computer or the first fixed it, but not this time.

  I'm in OS X Mavericks on an Early 2009 Mac Pro. The GPU has been upgraded to a GeForce 680 Mac Edition.

  I can't continue to do all the audio related jobs without terrorizing my co-workers and / or damage our monitors. Any help would be appreciated.

  I can provide more information on request.

  -Alexander Swensen

  I found a solution to this problem, but I know not what exactly I did to remedy. I'm not 100% sure that I fixed it yet, even now, but the problem seems to have disappeared today.

  I've done mainly two things that I think helped solve the problem. The first was to remove the folder cache, as well the previews, the database, files, all use what Adobe Premiere as files Cache media. I deleted manually, forcing all my clips to re - scan, conform, etc.. It's a small price to pay, and this process has been done in an hour or two.

  The second thing I did was to create a new sequence and copy the text of the problematic sequence in this. (on a new copy just after the restart to clear the cache) The problem seems to have disappeared for the moment and I'm guessing it was a bug with the sequence itself.

  My project is always very well, so I'm happy about it.

  Here is my theory for why this problem occurred.

  First of all, the project was initially launched in first Pro CC. This version of adobe has also been updated several times since the project began. I then moved the project in first Pro CC (2014), and I guess somewhere in there that the process of updating the project (2014) things that has been corrupted in the sequence, I was working in this year there there. There may be other things that have not shown up yet as well as to the rest, but I am not sure. It can also just be a random bug that crept in this way.

  I hope this helps someone else.

  -Alexander Swensen

• Is "Track Matte Key" bug in Premiere CS6?

  The "Track Matte key" effect seems to work intermittently. Sometimes it previews correctly, sometimes, it does not use the cache at all, and sometimes it seems very well. The "overlay cache track" problems of this kind? If this is the case, someone has another way to add effects as a part of a clip/scene. That's essentially what I'm trying to do.

  The problem is that it is currently broken and will be fixed in the next version, they told us. Maybe more later this month?

• _kgl_latch_count

  Hello!
  
  Please explain, this parameter is the child or parent locks?
  Oracle 9.2.0.8
  
  In the note ID 22908.1 ( kgllatch_count *):
  The hidden KGLLATCH_COUNT parameter controls the number of library cache locks
  
  
  Thank you and best regards,
  Paul

  Salvation;

  There is a parameter of initialization of Oracle database hidden called kgl_latch_countwhich behavior of controls with respect to the number of locks to cache library created in the Oracle database. By default, this value should not be changed because it is sufficiently defined in most cases. In case there should be a library cache contention problem and no further appeal is available to resolve the contention with the library cache latch, this value can be increased.

  For Source click here
  This setting is not documented and should not be used, I suggest elevation SR and comfirm with oracle support. Please also update :)

  Respect of
  HELIOS

• & quot; Setting and retrieving Cookies & quot; DreamWeaver 8

  I'm in training for the book, 'MacroMedia DreamWeaver 8, training from the Source.' I can't get get cookies placed on my hard drive with the code that I used in Chapter 4, setting and retrieve Cookies. I checked my code against the code in the book, and they seem to be identical. Cookies are transferred on my HDD by variables defined in the code, but the code fails to retrieve cookies from the hard drive as planned on the linked page. Finally, I want to develop an interactive commercial site because I need to fix this now. Any help is definitely appreciated. I list below, the code I use for each of the three dynamic pages.
  
  Test form:
  Information entered on this form and to test the form processor (it works well).
  [
  Code]
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  < body >
  < form id = "frm_name" name = "frm_name" method = "get" action = "test_form_processor.php" >
  < label > first name
  < input name = "FirstName" type = "text" id = "FirstName" / >
  < / label >
  < p >
  < label > family name
  < input name = "lastName" type = "text" id = "lastName" / >
  < / label >
  < /p >
  < p >
  < p >
  < input type = "submit" name = "Submit" value = "Submit" / >
  < /p >
  < / make >
  < / body >
  < / html >
  [/ Code]
  
  Processor of fitness test:
  The first name and the name of the page a transfer to the variables on this page, no problem.
  
  [Code]
  <? PHP
  setcookie ("firstName", $_Get ["firstName"], time() + (60 * 60 * 24));
  setcookie ("lastName", $_Get ['name'], time() + (60 * 60 * 24));
  ? >
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  < body >
  Thank you < p >, <? PHP echo $_GET ['name'];? > <? PHP echo $_GET ['name'];? >, for my application. < /p >
  Check < p > < a href = "test_form_processor_cookies.php" > < /a > cookie. < /p >
  < / body >
  < / html >
  [/ Code]
  
  Test cookies in processor form:
  The sre cookies transferred on my hard drive, I checked by looking in the browser cache. the problem is that cookies are not retrieved by this page. When I click on the link to this page, "I get Hi,!.» The code why don't echo the variables that hold the cookies? The code is below.
  
  [Code]
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  < body >
  Hi, <? PHP echo $_COOKIE ["FirstName"];? > <? PHP echo $_COOKIE ['name'];? >! < / body >
  < / html >
  [/ Code]
  
  All bindings are defined, cookies are placed on the hard drive, but for some reason any page link does not collect cookies and print them to the screen, as expected. I use Firefox and IE7. I put both completely accept cookies, always I can't retrieve the cookie set by this small application from my hard drive, when I run the pages. Any help and ideas are appreciatted.
  

  The problem is in the Cookie set to page 2 header. It should be $_GET and not $_get. Dreamweaver uses the lowercase with the get method. The correct $_GET is displayed in blue letters on top of case, instead of black and lower case letters. It is a very slight difference, as PHP uses the method get lowercase.

• DW8 crashing

  
  I forgot to say DW8 I went to sites and it crashed when I tried to apply a model change. It's already happened without lasting damage, but today it seems really crushes something, because now I can't do anything without DW8 crashing (no special error message appeared). So whatever I do once DW8 is reopened (select a menu item, scroll, etc.), it crashes. I tried to reinstall DW8, but it did not help, nor a result of upgrade to DW8.02. I use an iMac clocked at 1.8 GHz with 1.5 GB of SDRAM DDR and OS 10.4.10. While I'm waiting for the delivery of more Adobe CS3, so I'm desperate to get work DW8. Any suggestions would be greatly appreciated! Thank you.

  I thought about it. The file Cache of the Site has been damaged. By deleting this file and allows the application recreate the site as soon as cache, the problem has been resolved.

• Problem with upgrade RAM of DC7700

  Good morning guys, I have a problem with my HP DC7700... I need to improve the RAM and I bought a stick of 1 GB RAM... When I put it on the motherboard to the start with the power button, do not start BIOS! She do 5 beeps, what I have to do for this update?

  The bios is upgraded to the version v 01.16 786E1 ultimate... Thank you again!

  Like these memory modules are guaranteed to be compatiblewith the motherboard of your computer desktop and also max out your RAM to 4 GB.

  You did not indicate whether or not you mixed memory sizes, brands or capacities when you upgraded. What are the reasons for copmmon an upgrade attempt will fail.