HP defective Photoprint 5520

I bought a printer HP 5520 on the Apple Store in Belfast and get a receipt, but because he is not an apple product I can't get online help about this. Internet searches show that it is a defective unit. HP say I return to the place where I bought it. It's a few years old but he had only very light use and we have spent over 100 books on ink assuming, incorrectly, that the defective cartridges were to blame. The camera seems to should have been disclosed bad everywhere on the planet. Can you help me? Apple will bring it?

You are not address Apple here, so nobody can help with a return here. The device is outside the normal return/warranty period, I do not really need a way to send it back to Apple, unless HP had some type of reminder on this particular device.

You have the opportunity to make a trip to the Apple Store to learn more, but who can not get you nowhere as well.

Tags: iPhone

Similar Questions

  • Inspiron 15R (5520)-"Defective keyboard" and "defect with the 1 GB AMD radeon graphics card".

    inspiron 15R(5520)

    Problem wid the 1gb AMD radeon(HD 7670 M) Graphic Card and some keyboard keys. Graphic card is not identified. shows in Device manager but dosen't work. I have problem wid some of ma keyboard keys. I have to tap it twice or thrice to write.. Called up da customer support many times but no good response... I'm really exausted, Plz help...

    Hi Jelena,

    Sorry for the delay. If the operating system was already reinstalled and the scan of the PC came with an error, the video card will be replaced. Please click on my username and add me as a friend. Please provide the number of service system, the owner's name and contact number by only private message. I check the details of the system warranty and help you with this question.

  • Upgrade to Cisco ASA 5520 8.2.5 to 9.1.7

    Hello

    I have an upgrade tonight for a customer to upgrade a StandAlone ASA 5520 in version 8.2.5 in 9.1.7. I have the same upgrade week next to the same client for a failover pair.

    I already have this kind of process of 8.2.x upgrade to 9.1.x so I know the entire process, since I have to take a first step 8.2.5 8.4.6 then 9.1.7. In addition this customer has no statement of Nat therefore normally an easy process.

    But today during my routine to prepare for the upgrade (I prefer to make a double or triple check before) I found this bug:

    https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCuh19234;JSESSIONID=0A69...

    This bug is fixed in version 8.4.7, and 8.4.6.99. But it is not recommended by the upgrade process for a 8.2.5 to 8.4.7 jump and I can not find the 8.4.6.99 version.

    I don't want to have any problems during my upgrade with something I can avoid.

    As I said I already have this updated in the past without any problem and with a more complex configuration.

    Has anyone as a return to this process for the last months? Should I do an extra step? (before first 8.2.5 to 8.4.5 8.4.6 or 8.4.7)

    Thank you in advance for your answer.

    There are a few incidents reported for ASA 5520 8.2.5 hit this defect running.

    You can go for an extra for 8.4.x upgrade as you mentioned to avoid default we can't say for sure if you will encounter this situation or not.  8.4.6.99 can be a picture of development so be unavailable unless you want to call TAC and confirm or obtain any other image in 8.4.x train.
    Maybe add another upgrade code can't hurt as that hit the bug.

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • That means the apparent defects?

    My iphone 6s knows chipping aluminium and he said be a disfigurement. So I would like to know what is really considered as aesthetic damage?

    The apparent defects are damage that does not affect the functionality of a device, although the definition of Apple this can differ from the user. Because it does not affect the functionality of a measuring device, cosmetic damage not covered by the warranty. In the case of chipping aluminium, it does not the less functional phone, it seems less desirable.

  • My EarPods are defective and interrupt my phone

    II had my EarPods less than a year and they have been treat with care, have not been dropped or wet etc.. They observed a break and play music randomly, Siri activation and fast forward music and skip songs etc. It is annoying, I'm a student and can't afford to pay £20 + for more earpods when an apple product should last more than 8 months. Y at - it everywhere they can contact to receive a free replacement?

    Hello

    EarPods are covered by a one year limited Apple against material and manufacturing defects warranty.

    Contact Apple support (mail service may be available) or make a booking Genius Bar to arrange for them to be verified by Apple and, if it is eligible, repaired or replaced under warranty:

    I'm afraid that no one here can tell you what that decide to Apple (he is a user-based community).

  • Is my rMBP defective 2015 or does have a glitch or bug?

    Hi all! Can anyone tell me if these symptoms are acceptable? 2 days ago, I bought a new MacBook Pro retina 2015 (entry level) model 15 ". It's actually a replacement/upgrade of a rMBP defective 13 "which was a lemon. I'll try my best to explain this. What happens is when I'm playing video on QuickTime my control functions (play, pause, fast forward, rewind, stop, and esc. desire does not.) This happens regularly and doesn't happen that after I pinch to minimize or maximize and only after I have the same pinch action twice. I know it sounds silly, but it's true. I mean, it's controls stops working after that I have pinch to optimize two times in a row and when I pinch to reduce at least twice in a row. The only way for the controls start the new operation is to pinch the reverse of what the screen. So, if its in full screen I'm having to pinch two times on the screen to minimize and vice versa and then it will work. Can someone please explain this? Someone of you have heard of, or been there before? Seriously, I think using the return policy of 14 days of Apple and swapping out for a different MBP. Thanks in advance for any tips and advice! See you soon,.

    Greg

    Make an appointment with the Apple Genius Bar for the service. If you need a Apple Store - find a store - Apple. The machine is in warranty and within 14 days from the date of purchase grace period.

  • Firefox version 37.0.1 - "serious safety defect".

    I went to http://www.greenpasture.org/public/Home/index.cfm , and it displayed the following message is displayed:

    We see that you use as browser Firefox version 37.0. This browser presents a serious safety defect and is not recommended for use on this Web site. Please change to Internet Explorer, Chrome, Safari or Opera or another browser to continue to navigate this site without problem.

    Is this true?
    -If not, why they display it, who else thinks that this is the case, and whence this rumor?
    -If Yes, when is this corrected?

    PS - I'll send you a print/copy of my computer screen to your Web page of "Feedback" feature, but I could not submit it here. You can add this feature in the feature?

    I have just returned to the scene to capture a screenshot of the Message Security and it is no longer present. I guess that Mozilla or greener pastures solved the problem.

  • I Pod Nano defective

    I have an I Pod Nano 7th generation is probably 8 or 9 years old.  It's worked perfectly without any problems.  I used it yesterday and put it on the charger, last night.  I got it this morning and it wouldn't turn on so I plugged it to my computer and I get a message that the USB device I plugged defective and so my computer does not recognize it.  Is it toast or is it some sort of reboot that I can do?  The computer that is running Windows 10.  Did not have download problems or the synchronization of songs with Windows 10.

    Do not take account of the question, I was able to hold down the sleep/wake button and the power button and managed to do start.  To turn on and off several times so I think I'm fine.

  • After October patch Tuesday (ignoring the patches identified as defective) screen scrool is seriously slow and jerky. Updated graphics drivers (AMD). This screen is sl

    First: explain to people who come here that the possible small text on the logon screen is not the text of the actual issue, but a title. Mozilla in general (and this is a problem in my mind) requires more that a common user will know trying to find or post something about your products. Generally poor user interfaces. After having entered my information and proceed to the next step: what on earth are the options you provide supposed to do? Come on; Get a non-specialist to look at these things that you present to users to simple English-language dailies can see what you mean!

    After you have installed the files from Tuesday October patch (not identified as defective, extensive research on the web), my screen is too jerky and delayed when I scroll through the page or enter text.

    I installed the last chart AMD drivers/software. I looked for things that may interfere. My final test was to copy the url of this site in Firefox to IE. No problem with IE.

    ERGO, there is a problem with Firefox. Regardless of the cause.

    Please try to find a solution.

    Hello

    Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

    You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    1. Click the menu button

      and select Options

    2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
    3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    4. Now restart Firefox and see if the problems persist.

    This solve your problems? Please report to us!

  • ringtone on my iPhone 6 is defective

    The ringtone on my iPhone 6 is defective.  Maybe it's a coincidence, but I have downloaded IOS 9.3.2 upgrade 2 days ago.  Now it does still not sound even if the ringer is on.

    < re-titled by host >

    Is there a moon in the upper right corner?

    That means do not mind, it's on.

    Turn on or off the do not disturb

    When do not disturb is activated, a Crescent Moon , or half-moon, an icon will appear in the status bar. There are two ways to turn on or off the do not disturb:

    • Tap Settings > do not disturb. Choose the manual option to activate the do not disturb sign now or set a schedule.
    • Swipe up from the bottom of the screen to open the Control Center. Tap on the Crescent Moon.

  • MagSafe 85W defective twice 2 each period of 1 year

    I have the model of MacBook Pro retina 15 inch end 2013 mono GPU, and it's 2 MagSafe 85W power adapter is defective for the 2nd time in one year. The original one supplied with the MBPr was faulty, a year after I bought my MBPr in June 2014, so I bought a new around 2015 Center local apple Store and it cost about $150 here. And now may 11, 2016, this 2nd MagSafe, bought also died. stop working without any reason. same as the first. I am so confused and obviously really disappointed. I use all my macs and it's accessories in normal behavior in normal conditions, as suggested.

    4 hours earlier it was working fine at my desk, then I went home and discovered that it does not work! Usually, I put my MBP and power adapters on a bag 15-inch fitted with compartments from safe for mac, no dust, no magnetic items. and it connects to the same normal power source (without equipment high voltage or line noise) AC as every day. But this time I heard clicking / popping sound on the main support unit. So I'm sure that its defective.

    What I have tried workaround was:

    all with no luck.

    The only thing that works uses my MagSafe Macbook Air 45W 2 for my MacBook Pro 15 inches for the moment. So, I know that my MBP is fine. I contacted Apple Support via Twitter, they respond. But since I did the test all troubleshooting they can only advise to bring the bad Apple's Service Provider MagSafe2 (I think that they will offer no work around that I can't find on the net, and I think that the repair cost will be the same as buying a new)

    I clearly understand the technical side and the value of the accessories of a computer, it didn't is not on "just buy a new" or just bring it to the service provider. But what I want to discuss here is one of you having the same problem? If there are a number of you have the same problem, means that this could be a serious case that must be addressed by Apple. Having 2 times faulty MagSafe 2 is enough for me.

    in any case, I'd love to hear your opinion, workarounds, nothing about this MagSafe 2, what is the best way to avoid it happening again. I really hope this would be the last time I have problem with $150 (in Asia) 2 MagSafe.

    See you soon

    A.W

    Standard Apple warranty is one year. Do no doubt as to his eligibility for the replacement free of charge for you.

    https://www.Apple.com/legal/warranty/

  • New Photosmart 5520 will not print in black

    I have a new HP Photosmart 5520 printer all-in-one.  Black ink ran out so I replaced it with a previously used ink cartridge which is of the same type # 564 but a XL version.  This cartridge has been barely used.  Now, I just can't get anything to print in black.  It will print in color, but not black.  I tried to turn off the printer.  I put the cartridge in my printer and it worked fine.  What should I do?

    edgarlogcabin wrote:

    my printer hp 5520 will not print black

    The in the here document troubleshooting steps may help resolve problems with black not not printing on your Photosmart 5520.  Especially make sure to check the events as on the Six Solution.

  • HP s 4330: cannot install Windows, freezes before restarting. [solved: chipset defective stepping]

    Hello!

    I am banging my head on the wall with this case, can not understand, how to proceed.

    My experience: I worked a few years as a computer store technician, especially on desktop computers, so at least vaguely, I know what I'm doing, and I'm very careful when handling material.

    Background of the computer: I got a used HP 4330 s after the deceased family member. No fringe, pretty clean, no damage or traces of fall release. He had dead hard disk (click), broken DVD (engine brackets bent, I am told it is a child work) and was very dusty (blocked fan). I removed the optical drive, carefully removed all the dust, replaced heat is dedicated to the Sub CPU and put inside SSD, I took my other machine (erased). In the BIOS, I went from starting EFI.

    I jumped into the USB with Windows 8.1 fresh install, which ran well, until he wanted to restart. Screen went blue/violet (same color as the background of the normal installation), and it stopped, no disk activity, nothing. I turned to bike it, Windows installation proceeds, but failed. This is repeated several times.

    Steps I took to solve the problem:

    -Legacy mode and I tried to install again, same result.

    -Memtest Ran, past, memory switched to a few specimens (DDR3 and DDR3L), tried both slots, pass all, Windows will not complete the installation.

    -Traded stock to i5 - 2520M i3 CPU I had to hang out, which has been removed from the machine work (during upgrade), same result.

    -Done everything once again, this time without the battery and using big HP 120W 85x0w charger, same result

    -Exchanged on a different disk, same result.

    -Try exchanging AC7260 network card, only to discover he is blacklisted (* beep *?), removed wifi do map altogether, no change

    -Traded thumbdrive to another, and I tried two different Windows 8.1 relies

    -Turn off all devices in the BIOS, except USB.

    -Tried to install Ubuntu, only to find out that it works perfectly, but it will not boot from EFI, had efibootmgr shows the correct entries, laptop says that it cannot find the operating system.

    -Hiren Boot CD with BartPE is Windows XP starts and works very well.

    -Check time CPU, at a time using reporting and pirometer software, it does not exceed 65 degrees Celscius in any moment, which is well below the critical temperature on both processors.

    BIOS is F47. To my surprise, it is newer than what I can find in the download page (F07?).

    Can what steps I take to close on the issue? I would leave it under Ubuntu, but I need Windows on this computer, and I'm afraid he's going to go belly up.

    Last updated.

    First of all, doughjohn - problem is not in the initiation of the stop, but it will not accomplish the closure. There is almost everything disabled except BNT kernel and the video driver.

    The problem has been very difficult to diagnose, until I found a friend who also had the same machine.

    And here's the final solution:

    Like unbelieveble as it is, all three motherboards have manufacturing defects.

    Problem is the chipset: all of them, as, as I suspected, have Cougar Point B2 chipset with SATA bug. This degrades the connection of the HARD disk. There were two clues: USB3.0 adapter SATA with Windows 8.1/10 work and fine closures. Same disk moved in the hard drive bay or optical Bay can not close correctly and works over slow (!). Second, was my friend who had same 4330 s specifications, but without problems. I disassembled the machine and to my surprise he chipset B3, with visible signs of flow around it, and fix the markings certified HP. This laptop was RMA would once. I moved my installation to his mother, and he also starts very well on SATA ports.

    This is the first (and only) for laptop with Sandy Bridge-era components that suffer from a degradation of link chipset primary HARD disk SATA lines I've seen so far.

    To sum up: HP, your fault this time.

    I sold the laptop and I'm looking for a new machine, it will probably take HP 6470 B, if I can find all the components.

    Thank you for all those that the air here and offered advice and guidance. I really appreciate your help!

  • battery use is poor, cannot get 9 hours music (medium) 4 hours video and 2 hours internet radio before charging. It is defective, because it's new, or is it normal for an ipod touch 6th generation? I think sending him again.

    Hi, I recently bought an apple ipod touch 6th generation, but the battery seems to be not as advertised.

    I can't get 9 hours of music at a medium volume, 4 hours of video with youtube and internet radio is 1 to 2 hours at best.

    My ipod is defective or not as advertised with autonomy. It is better to send return as defective or all contacts in like this apple ipod.

    Not impressed by the autonomy at all.

    All advice welcome thanks.

    You can make an appointment at your local apple store or service provider authorized and have them checked.

    I know it's not perfect, but they sell so external batteries, you can connect your device to. Plus, they are very affordable.

    I have a 6th gen iPod and I find myself recharged every day and sometimes two times a day. I don't listen to music top but do play a game and sometimes to check email so I don't think that your experiences are offline with my experience anyway

  • NB100 - keyboard defective?

    Hi, just put your hands on a netbook NB100, apart from the keyboard is TINY! will get in trouble for putting pressure on the keys for you, if stab you the keys down they work, however normally touch typing registers intermittently.

    more than 4 people have tried at the office today and all have had the same problem with the keys does not. If you press lightly on the button and feel when the button is pressed and more randomly missing!

    Ive has search these forums and no one has had any problems, would it just defective?

    See you soon

    No, it happens to me as well as you really need books on these keys

Maybe you are looking for