HP deskjet 1010: hp deskjet 1010 to samsung chromebook connection

Similar Questions

• my mobile big samsung no connection to my pc using a cable what should I do

  my mobile big samsung no connection to my pc using a cable what should I do

  Hello

  Please follow:
  http://www.Samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=7383&prd_ia_cd=N0000003&map_seq=49567
  Hope that will be useful!
  Thank you

• HP Deskjet 2540: Can I install HPdeskjet2540 using samsung chromebook

  When you try to download the software tells me "there is an error downloading the software for your printer"

  Are these compatible machines?

  Hello

  The Google Chromebooks does not allow for any installation of software, printing is possible using the Google Cloud Print service.

  As the 2540 Deskejt is not active ePrint printer can be defined as a conventional printer.

  Be aware that another PC or Mac must share the printer with the Chroebook, it cannot be used by directly.

  You can find the steps to set up the printer on OS Chromg in the following link:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04127429&DocLang=en&docLocale=en_US&JumpID=reg_r1002_lamerica_nsc_cariben_c-001_title_r0004

  Shlomi

• HP DESKJET INK ADVANTAGE 1515: To connect the HP DESKJET INK ADVANTAGE 1515 printer device to multiple computers.

  Mr President, I have HP DESKJET INK ADVANTAGE 1515 PRINTER I want to connect to my two computers with all FIRST Windows XP and the second having Windows 7 operating systems. Kindly help me to do this in detail...  THANKS IN ADVANCE

  What's your plan for the connection?   It is a USB printer only, no network connection.  You can connect to a computer and then enable Microsoft File and print sharing on both computers.   Or if your router has a USB port that supports printers CAN operate when connected there.

  Those are your options.

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• HP DESKJET 2540: My HP printer connects to the wrong wireless network

  Hello

  I use a MacBook Pro, OS X 10.9

  I have a printer HP DESKJET 2540

  I just installed a new network at my place. I'm trying to connect my printer to this new network wirelessly via WIFI.

  BUT the printer keeps on connecting to the previous network, which is an open access network (FreeWIFI)

  I've tried EVERYTHING. I pressed simultaneously the Wireless button and the button to launch the copy in black. The wirelss test report shows that my printer is currently always logged the previous SSID

  Help, please!

  TX

  Hi @JACE1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 2540 guard wrong wireless network connection. I'm happy to look into this problem of connectivity for you!

  On the wireless test report, must be an IP address from the printer. Try putting the IP address in a web browser, such as: Safari or Firefox, etc. You should see a built-in Web server. Find the network tab and then select it. Then, look for the wireless configuration wizard option. (This should be able to search for the network wireless appropriate for you).

  See page 55 of the User Guidefor more details your printer.

  Hope this solves your problem and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• PRI all-in-one HP Deskjet 2542: not the printer connected to the Modem

  My modem (wired LAN) password and the name was changed recently and now my printer (HP Deskjet 2542 all-in-one) does not connect to the modem.  The blue light just continuously flashes.  This is the only change that has been done to my modem and this is the first time I tried to print. It is printed on the front.  I called the cable company and they determined my modem was working fine and has suggested that to change my printer settings.  I grew up the printer instructions on my computer, but could not find something that I could change my settings to match the modem.  I think that's what the cable company told me to do.

  My printer is mod. # SNPRB - 1204 - 02.  If you need made more information let me know.  It seems that this should be a quick fix, but I'm not a computer geek.

  Hi @first100years,

  I'd love to help you connect your printer to your wireless network. The flashing blue light confirms without a doubt that, for some reason, the printer is is more set up.

  I found the following steps in this document: connect the printer after change of your wireless network.

  The HP software automatically collects the network settings by temporarily connect a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network.

• Deskject 3512: Deskjet 3512 x does not connect to wifi

  With my old service, my deskjet 3512 connected to my wifi via a gateway router, and everything was happy. With my new service in a new State, the arris modem would not accept the gateway router and so I have no WPS button and the modem has no USB port. Also, since my computer alone is a Chromebook, I can't download the drivers or change the configuration of the printer via PC or Mac.

  Any advice on how to get my printer online?

  Hey @Thrillcheese,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I appreciate that you try to connect the all-in-one printer Deskjet 3512 to your network using your Chromebook. I can help you with that.

  Here's how we're going to connect the printer to the network:

  1. On the hand of the printer, screen scroll to settings and press OK.
  2. Scroll up to wireless and press OK.
  3. Scroll to Direct wireless and press OK.
  4. Scroll to the bottom for on (No Security), and then press OK.
  5. On your Chromebook under networks, you should see an option appear with a name similar to the HP Print XX Deskjet 3510. To connect to this network.
  6. In your address bar type 192.168.223.1 and press to enter.
  7. Click the network tab.
  8. On the left hand side under network, you should see an option for the wireless configuration wizard.
  9. Run the Wireless Setup Wizard to add your printer to your network.

  After that, the printer must be connected and you should be able to print. Please let me know if this resolves your problems or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• My Mac Pro and HP Deskjet 3070 PowerBook does not connect via a wireless network from dorm

  Both my laptop and printer (an all-in-one) are connected to the same wireless network dorm, but they do not connect on it.  They connect only wire using a USB cable.

  I have for the MacBook Pro and the Deskjet printer IP addresses but no way to use to establish a connection.  I don't have access to the network router.  When I test the connectivity, the software tells me, "too many networks."  He can't make a choice!

  Interestingly, I have my MacBook Air along this journey, too, and the two MacBook have no problem of communication on the same network of dorm.

  Is it possible to plug these devices such as computers connect or should I remain attached to the USB cable to use my new printer?  I guess you know how I feel about this.  Thanks for your advice.

  You are right.  There is no way to bypass security protected by password and thus to connect a Mac to a Deskjet 3070 via a secure network without access to a router, and a password.  However, even without access to a network or a router, there is a workaround solution.  In my case, where the technical ability to correctly configure the router and the printer is beyond the understanding of the management of the dormitory, qualified through the difference to happen anytime soon, it is the answer I need.

  The solution is to build your own Mac + network printer and make it private, protect it against unwanted entry.  This offer you little mobility in the area of the printer, which is much better than nothing.  A sofa can be more conducive to creative thinking as an Office Chair.  The unconventional twist that Johnny introduced the user, the printer that generates the sender-recipient, not the Mac network.  Very smart.

  I refer you to the thread,

  "Deskjet 3070 cannot connect to the ad - hoc network (Mac)"

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/DeskJet-3070A-cant-connect-to-ad-hoc-network/m-p/1446819#M38598

  Then the only question is to know how to connect your Mac on the Deskjet 3070 printer via the generic (as he calls it, "ad hoc") network created by the Deskjet printer.  The Mac has abundant features for this purpose.

  Thanks for the categorical assertion, however.  No sense to break down the walls looking for a nonexistent hidden tunnel...!

• HP Deskjet 2540: My printer cannot connect to the wireless network (SSID is not found)

  Hello

  I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.

  It comes on it comes up with the error message:

  Question: You have manually entered the name of the network (SSID) cannot be found.
  Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
  ============================================================================================

  Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.

  Help, please.

  Thank you

  In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.

• HP 1515: Deskjet Ink Advantage 1515 USB connection problem win10

  I bought yesterday hp1515.and the many ways as stuck in connection.i tried usb configuration (disable startup all the apps, buy a new gold usb sales-man who gave me), but still nothing is happening...

  now what?

  I solved the problem on my own... windows 10 prefer HP DESKJET 1510 SERIES DRIVER that does not work.

  you have to manually put HP DESKJET 1510 SERIES DRIVER CLASS to work

• HP Deskjet F4240: My printer is connected to my computer

  I have a HP DeskJet F4240 series and I want to connect it with my new Asus computer. The problem is that when I plug the USB into my computer, the printer does not appear. I would try to print but I can't find the name of the printer. Help, please.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-F4200-all-in-one-printer-series/3390945/model/3571306#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Please plug the cable USB ONLY when prmpted to do so by the software.

  Hope that helps.

• DeskJet 3050 a will not connect to my wireless network

  I absoulutely can't get my Deskjet 3050 has to connect to my home wifi connection.  It is a Motorola modem/router (wireless) model SBG6580.

  I went through the doctor for help (don't show me the wireless information.  The button did not work.  I tried to use my home password and id, but it does not work.

  Any help would be greatly appreciated.

  To connect to the printer Deskjet 3050 to a wireless network, you will need to temporarily connect to the computer with a USB cable. I'll link the instructions detailed below. If this does not work, let me know and I'll see what I can do to help.

  Install the software of the product for a wireless network connection

• DeskJet 3050 J610a - unexpected wireless connection problem.

  Running:

  10.7.4 MacOSX

  HP software: HP_Lion_Ink_SW_v12.13.17

  Printers: Deskjet 3050 J610a worked perfectly via a wireless connection

  MacBook5, 1 Intel Core 2 Duo, while I had been with HP Software HP_Installer_DJF4100_v9.7.1, which has been * no * intended for this printer, but I was able to "ADD" the printer Deskjet 3050 through preferences system, through the HP Socket,

  [Recklessly] looking for a more "functional" configuration, I looked at HP support and found that a specific software was released for computers running "Lion".

  So I uninstalled the previous DJF4100 software, restarted the computer and installed the new software and drivers for Lion as described above.

  Now the printer Deskjet 3050 J610a appears in the network of the computer under "devices" as

  "HPJ610a.047DED", Type: computer network computer. It is also detected with.

  ' Security: no ', while my Wi - Fi throughout the House network is encrypted with WPA/WPA2 Personal.

  I could of course decline on the previous software and configuration, but before that I would like to understand why this new software, which was released by HP for Mac computers running Lion behaves in such a way, why does the printer as a standalone device (which she has never done it before).

  As I said, before I regress to the previous configuration, using a software program that initially is not required by the printer or by the operating system, I greet all the information and suggestions.

  I need the wireless connection!

  Thanks in advance.

  Okay, well, I think that a different router can only solve this problem dead.  Consider an Apple Airport Terminal.

  If you connect your Mac on the network 'JPJ610a.047DED', this is a direct link between your Mac and printer wireless (not involving only the D-link).  So, naturally, you shouldn't be able to get on the Internet with this arrangement.a

  When you run the HP software (Finder - go to Applications-> HP-> -> printer software installation &) it will allow you to connect your printer directly to your network with the temporary use of a USB cable.  He who does not?

• Need 32-bit win7 driver for HP deskjet 950C for computer not connected to the network

  I can't find a way to load the driver for a 950C on a 32-bit computer Win7 HPDeskjet has NO internet access and no other network connection.  [Why is this so isolated computer?-this product is a Win7-Embedded-based instrument not designed for access to the network]

  The answers I found to this need internet access or a network solution.

  Can I get the files from the driver on a USB stick and install it?

  Help, please!

  Thank you

  -Tony H.

  This can be done, it is a bit involved.  You can download the driver site catalog update from Microsoft here:

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=DeskJet%20950c

  You should not use IE to your browser, other browsers are not supported on the catalog site.  Is the file that you want to a 32-bit system with a size of 11.4 MB.  (11.6 MB file is for x 64 systems and 13.9 MB system is for Server IA64 systems.)  Once the file has been downloaded, open a DOS command prompt and change directory to the location where the file was downloaded.  Then insert your USB key (I'll assume it's the X: drive in what follows) and in the BACK of the box type the following:

  Expand * .cab-F: * x:\

  This will extract the files and develop on your X: drive.  You can then take the USB drive to your computer and click Start, devices and printers, add a printer, have a disk and point to the INF on drive X:.