HP Deskjet 1050 j410 scanner Can enlarge a document? Win7

Similar Questions

• DESKJET 1050 J410 H: CAN A I USE INSTEAD OF THE 122 HP 802 HP CARTRIDGE?

  I USE a HP DESKJET 1050 A J410H SERIES PRINTER AND I want TO USE 802 CARTRIDGES instead of 122 WHICH WAS INSTALLED FIRST IN MY PRINTER. PLEASE HELP ME GET RID OF THIS PROBLEM. I WANT TO CHANGE THE CARTRIDGE BECAUSE OF THE 122 UNAVAILIBILTY IN MY COUNTRY. SO PLEASE HELP ME TO CHANGE THE CARTRIDGES

  If you bought the printer in a country and to another you will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

• I am trying to install a hp deskjet 1050 J410 series but I have have the disk what can I do to install it?

  I am installing a printer hp deskjet 1050 J410 series I have no disk, what can do?

  driver 32-bit:

  Microsoft Windows 7 (32 bit)

  64-bit driver:

  Microsoft Windows 7 (64-bit)

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Print Preview does not I can't print unless I've done (ctrl shift p) on Deskjet 1050 J410

  HP Deskjet 1050 J410

  Windows XP

  Press on print, print page preview comes but does not preview, so I cannot print unless I've done (ctrl shift p).  At the bottom of the print options on the left side in blue print is this: print using the dialog system (ctrl + shift + p)

  He worked last week and no changes have been made to my computer.

  Becky

  There is a possiblity that it's Google Chrome that has the problem.  Try to print from IE or Firefox and see what happens.

• DeskJet 1050 J410: Deskjet 1050 J410 used to scan using Windows 10

  My all-in-one Deskjet 1050 J410 worked well on Windows 7.

  Yesterday, that I upgraded my Windows 10 laptop.

  The printer asked downloading new driver s/w, what I've done.  It prints very well now.  But it will not scan.

  I can access the printer assistant screen in my taskbar.

  All options under the 'Print' button works fine.

  But when I press the "Scan" button, I get the message

  "The HP Deskjet 1050 J410 series was not found".

  I ran a few HP diagnostic s/w, which moved the scanner (I could hear it), and indicated that no problems were found.

  But still I can't access the scanner!

  Any ideas what to try next?

  I finally solved the problem, "common solutions for Windows 10' using HP Web site to

  http://support.HP.com/us-en/document/c04773236/

  This has had a link to 'HP printers - printer problems after upgrade to Windows 10'

  http://support.HP.com/us-en/document/c05212298

  Uninstall the old drivers of the printer completely.

  Restart the computer.

  Install new s/w and drivers.

  Restart the computer and the printer.

  Now, everything's fine.  It took some time to find the solution, but he was there if you knew the right search terms!

  After having done that, the link to the scanner on the taskbar disappeared.

  It took some other research, to learn how to get the icon on the taskbar.

  I finally arrived.

  S/W upgrades are rarely painless!

• HP Deskjet 1050 J410 cannot print in black and white

  Hey everybody,

  My HP Deskjet 1050 J410 on 64-bit Windows 7 is unable to print in black and white, even after selecting the option to do so. There is no error message, and the diagnostic tool on the HP site can not solve this problem too.

  Your help is appreciated.

  Hello world

  Follow the steps described in the following document below.

  Troubleshooting print quality problems

• HP Deskjet 1050 J410 software does not work

  After installation, I double click on the printer icon, nothing appears.

  How can I solve this problem?

  And how do I check the cartridge level in addition to using the software that im impossible.

  Hello

  If you have installed the software from the CD provided with your printer, unisntall it by clicking Start > programs > HP > HP Deskjet 1050 J410 and click on uninstall.

  Once finished, download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4158&product=4027465&sw_lang=

  If the problem persists invariably try to install the following hotfix and check if this is useful:

  http://support.HP.com/us-en/document/c03640384

  Kind regards

  Shlomi

• My hp deskjet 1050 J410 series is not compatible with windows 8?

  I downloaded the new drivers and I am able to print with my printer HP deskjet 1050 J410 but I am not able to scan anydocumants. I can't open the HP printer Assistant window. The error reads as follows:

  Adobe reader software cannot open HPSPProgress.hta because it is not a supported file type or the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I don't know if this has to do with my default programs or what happens. I am currently using 8 64-bit windows.

  Thank you

  Hello

  The doftware is fully compatible with Windows 8, the question appears because of the wrong configuration of your operating system to start the HTA with Adobe Reader files wrongly.

  Follow the steps below, this should solve the problem:

  1. Click the Windows (the key with the Windows Logo) key + keys X, and then open the Control Panel.
  2. Select programs.
  3. Under default programs, select make a file type always open in a specific program.
  4. Lecate and double click in the list .hta (HTML Application will appear in its description).
  5. Select Microsoft (R) HTML Application Host.
  6. If such an option does not appear, click Other Options.
  7. Click find another app on the PC at the bottom of the list.
  8. Navigate to C:\windows\system32 and select mshta.exe
  9. Click on Open, close all windows and then try to open the HP software.
     

• HP deskjet 1050 J410 series: first levels in hp deskjet 1050 J410 series ink

  I'm unable to check levels of ink on my printer hp deskjet 1050 J410 series.

  I have always used the following method worked well, but WILL NOT WORK today!

  Past the method: -.

  1. click on Control Panel on the desktop

  2. right click on the printer icon.

  3. click on keep your printer (to get the dialog box containing the estimated ink levels wording.)

  My problem:-I cannot find anywhere MAINTAIN YOUR PRINTER formulation that would allow me to access the dialog box mentioned in (3) above.

  Can anyone help please because I am at the end of my mind, I searched everywhere to no avail on the computer for a

  solution!

  Thank you very much.

  Joe

  The steps described in the paper here can help find the ink level for your HP Deskjet 1050 j410 on Windows 8.1.

• DeskJet 1050 J410: HP Deskjet 1050 J410 intermittent printing problem

  My printer has an intermittent problem where when something is being printed, a line will have the empty right in the middle of it (you can see part of the printed information line above and below the Virgin part).   About ninety percent of the lines print correctly.   Even if the cartridge still had ink, I replaced them - this has not fixed the problem, so I thought that the printer was bad.

  This is where it gets strange:

  Some time ago I bought an another Deskjet 1050 J410 (it was on sale and I wanted a backup).  I replaced the active printer with the new printer, thinking the problem would probably solve themselves.   Guess what?  It does the same thing as the old printer.   It doesn't seem to matter what I print (emails, documents,...).

  Thinking that it must be something in the processor (motherboard, printer card?), I turned off the system and left on the printer, then copied a page on the printer as a test.    It is also the same problem.  So now that I'm back to thinking, it is a printer problem.   But how the new printer could have the same problem as the old printer?

  Any ideas what is causing this and how to fix it?

  I ran the diagnostics HP (HP Print and Scan Doctor) and no problems were found.

  I also ran the HP (alignment, cleaning cartridges and printer) Toolbox.

  Is there a software that is loaded directly on the printer and could that be the cause of the problem?

  P.S. before I met this problem about 1 week ago, I had used the printer for more than 2 years and not had this problem.

  Jamieson, of the Forum of Support HP team sent me an email with a link that has several steps to correct the problem, I did.   I am very pleased to report that my problem has been corrected.    Jamieson, Bravo.  You have made my day. Keep up the good work.     I'm curious to know what caused this problem to occur.

• HP Deskjet 1050 J410 Printer series with windows 7 - installation problem?

  Good evening
  I just bought a new printer HP Deskjet 1050 J410 series with windows 7. I installed it... with many problems... whenever it is said that the driver could not be found... but in the end, it is installed. The scanner works fine. While the printer is blocked... When I clicked on the resolution of problems, the message I got was:
  HP Deskjet 1050 J410 series doesn't have a driver.
   
  I uninstalled and reinstalled 3 times and the same problem persists. I don't understand what that means. Should I please?
  Thank you very much for the help!

  Make sure you have the latest and correct the driver for your operating system.

  HP Deskjet 1050 All - in - One Printer series - J410

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=4027462&prodTypeId=18972

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• HP Deskjet 1050 J410 printer is not compatible with windows 8?

  Hi, I just bought the HP Deskjet 1050 J410 series printer. When I try and run the cd on my windows laptop 8 it comes back with a message saying "your OS system is not compatible with the series hp deskjet 1050 J410." I was wondering if you could help me with this? Thank you

  Hello dhwany,

  Download the driver on the web.  You can follow the instructions to install here.

  Please let me know if this helps solve your problem.

  Good luck!

• Computer is unabler to commuincate with the series of printer HP Deskjet 1050 J410

  I just install the printer, I did everything well, because he said, he is ready to use, but I get a message like

  "my computer is unable to communicate with the printer" can someone please tell me what I did wrong and how

  to solve this problem? I can make copies, but I can't print or scan

  Original title: I just install a series of printer HP Deskjet 1050 J410

  Hi Bill,

  -What do you mean "I can make copies, but I can not print, scan or?

  It could be that you have a firewall application installed on your computer that prevents communication with the printer, or perhaps you need to uninstall and reinstall the printer due to corrupt files.

  Step 1

  Initially I suggest you run utility HP Print and Scan of the link doctor and check if this solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/Forum/network_diag/&softwareitem=MP-120776-1

  Step 2

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers to communicate.

  I suggest disable you the Windows Firewall and the antivirus temporarily.

  View items-

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Step 3

  You can try to update the latest version of the printer drivers and see if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4027462

  Step 4

  Uninstall and reinstall the printer and check if it helps.

  Add or remove a printer

  (Also applies to Windows 7)

  For your reference:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I have a HP Deskjet 1050 J410 {a} not contacted the network printer.

  I have a HP Deskjet 1050 J410 {a} printer which is not contacted via the network.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3 Windows operating system you are using?

  Method 1:

  I suggest review the links and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Network problems

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3795309&prodTypeId=18972&supportTaskId=42468

  Check out the link for more information:

  Solve a problem

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=4027462&TaskID=110

  Let us know if it helps.

• help with Deskjet 1050 j410 installation fails

  Hello, I'm on windows 7 on a HP Mini Note, I tried to install the Deskjet 1050 j410 printer all in one, several times, but I get the same message:

  Setup error

  Call to DriverPackageInstall returned error-536870141 for package ' C:\Program HP HP Deskjet 1050 J410 series\DriverStore\NGScanDriver\HPWia_Dj1050_J410. INF '.

  I downloaded the Installation HP troubleshooter, run a selective startup (disable all non-microsoft startup items), even deleted my program autorun eater, still without success. Any help would be appreciated, thanks!

  Since you have Windows 7 Starter, you will not be able to install the full features software and the printer driver. You will only be able to install the base driver, and you will only be able to install the printer via a USB connection. I'm sorry.

  HP Deskjet Basic drivers