DeskJet 1512: scanning problem

Similar Questions

• HP deskjet 1512: scan troubleshooting 1512

  I had an hp deskjet printer 1512 for several months and have not had a problem with scanning.  However lately when I scan a document, it scans the entire page, but only small portions of the document are displayed on the scan.  Any ideas?

  Hello

  Follow the steps below to resolve this issue:

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5385180/document/c03941429/

  Kind regards

  Shlomi

• HP Deskjet 1050a scanning problems - can't set preferences

  "scan images as separate files is gray" so cannot change the default location for the scanned documents be transferred to.

  Hi jobmac106,

  You should have two icons on your desktop for this printer. If you click the scan icon and then click Advanced settings you can turn then save to the location. If you do not have the same screens as below, you need to install the full feature software and driver from the link below.

  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&lang=en&LC=en&Product=5068681&Tool= &

  

• DeskJet 2540: Scanning problem

  I recently bought the 2540, set up and it works fine.  Well, fine as printer and copier... not like a scanner.  The booklet accompanying indication on digitization, and there is no manual online to download.  It says "scan" on the matter, but no guidance on how to analyze.  Sense please, anyone?

  Hello @YolandaLand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your scan feature.  I would like to help!

  I recommend to remove printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest also download and run the HP print and Scan Doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• DeskJet 1512: How to scan a document, paper or a MS Word file, using the Deskjet 1512.

  I need to know how to scan a Document MS/file or print using the HP DeskJet 1512. I found no instructions on the way when the printer/Scanner/copier was purchased from Wal-Mart in Dinuba (California).

  User Guide: http://h10032.www1.hp.com/ctg/Manual/c03832527

  Analysis means scanning a paper copy of a digital file (image or with OCR to editable doc). You analyze a word doc, as it's already digital (file).

• HP PSC 1512: HP PSC 1512 scans is over after the update of Firefox on Mac

  Have a HP PSC 1512, just over a year.  It has worked perfectly for printing, copying and scanning functions.   I rarely scan so ignorant, that he had ceased to work until I tried to use it today.  Nothing complex, just old school I scan a document on the desk and not wireless.  A message pop up says that the scanner is busy or not connected.  I restored once the scan feature on my old HP 1510 model with a simple reinstallation.  So I tried on the 1512, but nothing helped.  I ran a utility of cleaning, power on the printer to the top, then tried the installation disc.  A pop-up message advised that I don't have a printer connected at all or it just could not be recognized.  Then, I downloaded the driver from the HP site software but the end result was again '' series unrecognized. ''  At this time, I noticed verbiage on the page of software that says this document is for computers Apple, who uses Firefox 33 for web browsing.   Firefox has implemented many improvements and now we are up to v.45.0.1 could this be why the scan function does not work and the unrecognized device?  Print and copy features continue to work well and the HP utility reflects all the relevant details that I'm used to seeing.   Loss of scanning is not a deal breaker but y at - it software available for the latest Firefox or parameters that can be changed?  Or am I just spinning my wheels?    Thank you.

  Hello
  Welcome to the HP community @Peaches46,

  I came across your post on digitization issues you are facing in your Mac running 10.6 and HP printer. I am unable to find the "PSC 1512" model, would you possibly the Deskjet 1512? If so, the following steps are all offered to you! Let me know if you happen to have another model.

  Troubleshoot the hardware to start and try a power reset. Also make sure that the printer is plugged directly into a wall outlet.

  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Try scanning using the HP software.

  If the scanner still does not work, try the following steps in order:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click on this link to download and install the full functionality of driver and software: HP Deskjet 1510 all-in-One Printer series full feature software and drivers
  5. Click on this link and try scanning using different methods of scanning: How to scan (OS X 10.6)

  If you have trouble with the steps, let me know and I'll do my best to help.

  to testify of my attempt to help you today, click on the thumbnails below. Click on the 'accept as Solution' If the problem has been resolved, please and thank you!

  Have a great day,

• HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10

  I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work.  I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it.  Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time."  I have administrator rights on my laptop, no one else is logged on, and I have no other applications running.  Any suggestions?

  Hey there John!

  Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.

  Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.

  Good luck! Enjoy your day

• HP Deskjet 1512: Attempt at analysis of a series of 1512 HP Deskjet

  Hello, I wonder if you could help me. I'm trying to scan a document using a HP Deskjet 1512.

  I tried to access the icon for the HP Deskjet printer, via the Start button, then he takes me into all programs, can I access the HP icon, it indicates the series HP Deskjet 1510. I noticed, that he did not actually 1512 series.

  Anyway, once I clicked on series HP Deskjet 1510, below that he has highlighted study to improve product HP. It does not emphasize the installation of HP Scan.

  In the past, I used to have a version older than a HP printer and never had any problems. Once you have pointed out the HP icon, it will give you the option of detection etc.

  For some reason, this model doesn't give me that option immediately. I would appreciate help with this.

  Thanking you.

  Hi Gemini2

  I would like to say thank you for having responded to my query re: above.

  Thanks for the link re: drivers mising, but didn't know about this path. You mentioned that there was a possibility that I might have to uninstall and reinstall the software.

  So, after having researched a bit more, I realized that it was more than likely that I had only the basic features installed.

  So, I decided to log on for my printer and re-installed HP website the full software for my HP Deskjet 1512. He took me to the registration also. I do not uninstall anything beforehand. Is it installed only the bits I didn't have before, can not be sure, but I noticed in the section devices and printers to my computer, it did not create another icon of the printer etc..

  Once the installation process is complete, I could see all of the features, including the option to scan.

  I tested the printer by printing a document and scanned a photo that I sent to me by e-mail.  Both worked well.

  There seems to be a lot of people out there who has similar problems with the analysis option. It seems that unless you install the FULL software for this printer, features as the scanning is not available.

  So, once again thank you for your quick response. Very much appreciated.

• HP Deskjet 1512: Cannot print from Microsoft word 2007

  Hello

  I recently bought a HP Deskjet 1512, it scans and copies without any problems, I am able to print images and files of e-mail, but it won't let me print anything from Microsoft Word (2007), I rebooted and reinstalled the software, I ran the hp doctor and nothing works I still can't print There is no error message and it is not in the print queue, it simply nothing if I click the quick print or preview before printing in word.

  Thanks for any help

  Jessy

  Thanks for the help dragon fur.

  Your answer does not solve the problem, but he did something worse either.

  I have it fixed now though it was a security issue blocking MicrosoftOffice to link to all connected devices.

• HP Deskjet 1512 - Page too small / Unknown Error

  I just bought HP Deskjet 1512 all-in-one printer. Installation went normally, however, I can't print anything Windows Vista 32-bit. Here are the various error messages that I get:

  "An unknown error has occurred" - FireFox

  "DΘmarrer can't feel" - WordPad

  "DΘmarrer can't feel" - MSPaint

  "Page too small to print a line" - the notebook

  Another oddity is that WordPad will display only a single letter per line. Microsoft Word displays not only any text whatsoever, not even of previously, working document. Any attempt to print from MS Word results in nothing happens, not even an error message. If I uninstall the printer and then Word, WordPad and all previous documents, poster correctly once more. Only when the printer is installed I see these quirks.

  I tried everything and nothing has solved the problem. I have uninstalled/reinstalled the disks and drivers online. I used the Print and Scan doctor says all right. Checked all cables, rebooted, reconnected, crossed the 50 of the obvious things to check. As far as I can tell everything works; ink, printer, scanner, copy, etc.. I have made copies and scanned with no problem. Test maintenance pages also print without problem. I suspect that the problem is the printer drivers for Vista. For some reason, it says page is too small, so clearly I have paper loaded into the machine and selected letter size in the main tray.

  Is there something that will fix this problem? I may need to return to this unit and back to Canon.

  Finally, I returned the printer for a refund. Thanks for trying RnRMusicMan

• HP Deskjet 1512: printing

  Please help, I am trying to print from a c/d crafts on my new printer and a message comes up saying printer could not print Flash.  The test page printed ok

  Hi @Ladybird2,

  Welcome to the HP Support forum.

  I understand that you have a printer all-in-one HP Deskjet 1512 that a computer is Windows 10, and when you try to print from your CD of crafts you see a message indicating that the "printer could not print from Flash. I want to help you with that.

  Adobe has released an update for Adobe Flash Player on January 5, 2016. You can get the update for Adobe Flash Player by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Deskjet 1512: Range of printers HP 1512: open door

  Hello

  I bought the printer HP Deskjet 1512 today. I established in accordance with the instruction manual and also installed the data CD. However, when I go to print, I get a message the next door. This obiovusly keeps me to print, I also tried to copy that does not work! I tried closing and open all the doors and the withdrawal / re - insert the ink, but nothing don't seem to do the trick.

  Please help because it's a big inconvience to me now, and there is very little useful help currently avalbile.

  Thank you

  Nick

  Hi @nick96,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your new printer HP Deskjet 1512. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem.

  The HP Deskjet 1512, has two doors at the front. the inner door is the door of access to transport and other is the output tray.

  If you can see the inside of the printer where the cartridges are the transport access door is open and must be closed.

  Please see the beflow images.

  

  Source

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• DeskJet 1512: Deskjet1512 HP A5 paper size

  I bought today an all-in-one printer HP Deskjet 1512. This model being chosen on the 1510 as 1512 Spec claims that it prints paper A5 size, yet A5 is not in the list of size of paper under Printer setup / advanced options.

  Does or does not print A5 as advertised?

  talked with HP this morning and now loaded drivers for the 3520 that solved the problem.

• DeskJet 1512: Deskjet 1512 printer does not install...

  Hello

  I have a Deskjet 1512 printer ' All in one '.

  I followed the instructions of installation and configuration up to the last comma - and still some 6.5 hours later - I still have a new printer that doesn't work.

  I am running Windows XP / SP3 / Dotnet 3.5

  I ran the installation disc (supplied), made a cup of tea, ticked the boxes, responded to the questions.

  When you are asked (and only when prompted) - connected my USB cable and the printer to the computer... This is where the problems started.

  The function of 'Full' whistles and software bells began to try to detect my camera.

  He was defeated by Windows Harward "Wizard" - saying it had detected a new device... but it can be installed "due to a missing Module.

  About 2 seconds later - the HP software "Full Feature" he spits is dummy and tells me to connect my printer and check the USB cord...

  Yes - I replaced the power cord USB ther with 4 different ones I have alternatives, but also try different USB ports on my computer.

  Always the same question.

  However-

  The Scanner was installed - and works very well.

  So, I tried a forced installation of "Backdoor" of the drivers of the printer - via the Windows hardware Manager.

  This all seemed so promising - the pilots finally looked as if they were installing.
  99%, the hardware Popup Manager informed me that my "device had been correctly install '...

  About 1 second later - another window will appear - now telling me that it was not possible to "do something"? and that my ' device was not installed.

  A quick look through the driver manager showed me that my scanner was installed, but the printer was not.

  I completely uninstalled the HP software, then Dot Net... cleaned all Temp files and deleted all entries in registry rogeu.

  Then restarted my computer (after checking that USB 2 has been enabled in Bios - who it was)

  I then reinstalled the far Dot Net (downloaded via the HP Web site) and the "Full Feature" software (also courtesy of the HP site) this day... and...

  .. even the same.

  In short - I tried:

  • Remove all previous installations of HP and Dot Net 3.5 software
  • Relocation of all of the above
  • 4 x different USB cords
  • All the different USB ports on my PC
  • Swearing and the curse (usually works with Microsoft Products only)

  The only thing I have NOT tried, is witch Craft and Country dance.

  Any other suggestions would be very appreciated...

  Update...

  I completely erased from my hard drive and reinstalled XP, SP3/Net fix...

  The printer is installed the first time.

  If everything is working now.

  There was something installed hidden somewhere that the installation process didn't like.

  Thanks for your help with this.

• HP Deskjet 1512: List index out of bounds for Deskjet 1512

  Try to print lists of names of files and their size, developed by STG printed case, results in an error message of "List Index out of bounds".  The printer is a HP Deskjet 1512. Using Windows 7.

  All solutions?  Thanks in advance.

  Thanks for your reply. My problem was eliminated by mearly restart the program.  I would have thought this before spending several hours looking for a solution in my HP printer setup.