HP DeskJet 1514: Hp Deskjet 1514 does not turn

Similar Questions

• DeskJet 4160 does not turn off.

  I saw the post with the same problem on an another DeskJet, but the solution was a replacement - my 4160 is out of warranty. I had the same indicators - the flashing of the button "we / off" and the "Summary" button flashing - but turn off the computer did not work for me. I unplugged the printer with the computer off and was still out of action. BTW, I also had an indication "disconnected" on the page of the HP Solutions.

  I downloaded a fix has been described as "disconnected" problem and could make the printer work (used diagnosis HP download). But I can't even turn the printer off.

  My hypothesis is that there is a fault in the wiring of the button or the internal logic chip that does not send the signal to the circuits 'power '. My 4160 is about 4 years old, but is a very good printer and I would like it to work.

  I can work this way, the use of the power to the inactive printer won't break me - but I wonder if anyone has seen this problem.

  Best, Jon

  Thanks Shlomil.

  I see by your post I'm unclear in my question (and looking at my message that I wasn't really clear). Despite this, my problem is now solved.

  I had already healed the problem "flashing lights" and got the printer from the device by unplugging the power for 20 seconds, but the problem rest not being able to turn off the printer was the source of my question. I didn't have to unplug the USB, as it seems irrelevant to the 'shut down '. BTW, I had also deleted messages waiting in lines to print on two accounts on my machine at home. It seems that disconnection of power took care of the queue, because I first tried this deletion with no result.

  I followed your suggestions and removed the USB first, then the power. I left it a full minute, then reconnected power and tested the switch panel "power" - it worked. I then reconnected the USB and re-tested, it worked.

  Can I ask the forgiveness of any future readers of this thread, as well as yourself, for details - but I don't see the logic of the complete disconnect regarding the "power switch". Maybe it was because I gave her more time, maybe it was the 'double disconnect. " There seems to be no reason for that the simple "off / on" switch would care about the USB connection, but who knows what "evil lies at the heart of a computer".

  In the introduction, I am experienced enough - although less so now these modern devices. My contacts with the computers date back to the programming of the machines IBM from 1961 and was still Assembly programming communication protocols in the 1980s. I encountered difficulties with the modern machine that is separated from the user by higher layers of level languages and operating systems developed by the committees.

  I'll make a suggestion to any future readers of this thread, always unplug the key USB (or another data link) first - then put the plug. Reverse the sequence in the re - plug, power first, and then data - and test the feature before plugging the data binding. Also go and pour coffee or get a beer, before reconnecting the power. The 10-20 seconds normally required to take down the logic circuits may not be enough. (Summer, done this hundreds of times when I was in the company).

  Finally, I'll mark this Accepted and click on congratulations (BTW, glad that's not kudo, the Greek word is not plural, something wrong understood by many sports commentators that "offer a kudo" to a player - that's the word for praise). But if someone think of a reason why it worked - that is, not the flashing lights, but the 'stuck' power button - I'd love to hear it.

  Best, Jon

• DeskJet 4360 does not turn off

  My Deskjet 4360 said firstly there is a paper jam (there is no). Then the led 'curriculum vitae' continues to blink. When I try to turn off the printer, he died not. I have to unplug it. When I plug it again, it is always on and the resume light continues to blink. Can someone please?

  I guess I feel better by reading your note, as my printer now suffers from the same fault.  It is a month.  I think it's just a dog of a printer... but hope someone will have a better answer than that we.

• HP Deskjet J110: 8.1 for Windows does not recognize Deskjet J110, does not print. Drive of reloads.

  DeskJet J110 does not test page print.  Removed the printer and reinstall, USb not recognized. Charges such as LPT1. Tried unplugging, reboot and reconnect. Same result.

  Hello Floadnar,

  Have you tried with another Usb cable? DC said that "usb not recognized it. You should check also Device Manager for universal serial bus drivers. Finally, you can try to connect both usb cable to check the work of regular printer usb socket or not. you don't need to install the driver. Simply connect the usb cable between the printer and PC. If both USB works with off problem that should not see the unrecognized Usb device message.

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• HP deskjet 995ck does not work on win 7

  HP deskjet 995ck does not work on win 7

  Check on the Web site of the manufacturer for an updated driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=JM&LC=en&DLC=en&softwareitem=DJ-14681-2

• printer does not turn on

  My Deskjet 6980 printer has stopped working.  It has worked very well so far. Flashing lights said he needs ink. I put in the new ink. Now, it won't turn. The power supply is turned on, the works of output (without surge protector), but the printer does not turn on. In all he has no light on the printer, except light power cord in the back. I tried everything I could find online, but nothing works. My computer was still recording the printer, but since it will not power, says that it is in offline mode. Any suggestions would be helpful.

  The unit may have developed a power failure, but may be also simply in a State of error because of the fresh cartridges.  There are a few steps, I'll try in this case of troubleshooting.

  * If possible, try to remove the cartridges that you recently installed before performing a hard reset of the printer.

  * Hard reset of the printer by unplugging the device, disconnect the other end of the power cord from the wall outlet, separates the power cord of the power supply, wait 30 seconds and plug it back up.

  See also the steps described in the document, found here, to solve a lack of power.  I hope this helps.

• When I turn my iphone sideway, the video does not turn sideway

  When I watch the video on my iphone, I usually turn my iphone sideway, the video would turn sideways to get the most out of the video. But now it does not turn sideways.  Try to find the adjustment to set the option or the recent updated version this video sideway option removed.

  Swipe up from the bottom of the screen to get to the control center. Press on the icon of a padlock on the right side until it becomes black. If the icon is white, the screen rotation is locked.

• Toshiba Camileo P10 does not turn

  I have a toshiba camileo p10. The problem is that the camera does not turn. I tried to recharge the battery, but the red light blinks for hours.

  I tried without the battery and the charger plugged but nothing happened. I cleaned the contacts.
  All solutions?

  Have you removed the battery AND the AC adapter?
  Try this. The two parties should be removed/disconnected.
  Leave the camcorder for some time (a few hours). Press and hold button power 30 sec long. After this plug in the battery and charger.
  Wait until the battery has been charged and then try to turn on the cam by pressing the power button.

  Good luck buddy.

• Toshiba 46HL900A does not turn on

  My TV turns completely. The Red led will turn from red to green, but the TV does not turn on? Someone knows why? Thank you

  Hardware problem might be serious... to be honest, that you have some many options troubleshooting...
  If its material of serious malfunctions, only an authorized technician would be able to help you.

• camera does not turn on

  I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

  The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

  Note: The charging light turns off, charging is completed.

  If the camera does not turn ON even when the load is in progress, the service is required.

  You can initiate the service from the link below:

  https://eService.Sony.com/

  You can also contact our telephone support or Chat to try additional troubleshooting procedures.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

  If my post answered your question, please mark it as "acceptable Solution".

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

  Hello.
  I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

  I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
  Could someone help me please

  Update the BIOS to the current version. A F.24. The direct link to the download is below.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe