HP Deskjet 2054A - no available maintenance task

Similar Questions

• NetExtender error must perform maintenance tasks.  Does not work after giving permission to do so.  Just upgraded to El Capitan.

  I just upgraded to El Capitan.  I get the error message after following the notation in NetExtender: "NetExtender error must perform maintenance tasks.  You will need to enter your MAC administrator password in the next window. "After you type that in, it says it connects to NetExtender but then disconnects me.  This goes on and on.

  Having never heard of before NetExtender, I can't go on how you described in your post, and I must say, Macs need not third-party programs of 'maintenance' on them.  One thing I can say, is that before you upgrade your operating system, you should always make sure that all your applications, plug-ins, drivers, extensions, etc., are compatible with what you have upgraded to.  This could be part of the problem, this program should not be what I think it looks like.  You are running the most recent version, and the version is compatible with El Capitan?

• Difficulty of broken desktop shortcuts and common system maintenance tasks

  error 0x80072f8f

  Hello

  1. Once you get this error message?
  2. have you made changes on the computer recently?

  Try the FixIt listed in the article below and check.
  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  I hope this helps.

• What do "Run maintenance tasks" in Windows 7?

  what works has no task maintenance > troubleshooting Windows 7

  Hello sparty nave.
   
  It looks unused files and shortcuts that you can clean or remove so that your computer can run faster.
   
  Read more
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Maintenance task

  Hi all, I had an interview two days ago but I couldn't solve it correctly, and I want you help me solve the part I couldnot solve.

  There are two tables:

  1 - master table for rooms with these data for example:

  room_no

  1

  2

  3

  ----------------

  and a detail, one for the booking details:

  res_no room_no

  1 1 20-dec-2012

  2 1 21-dec-2012

  3 2 15-dec-2012

  4 2 7-dec-2012

  -------------------------------------------------------

  the shape is a text element in the middle of the canvas has the month "dec."

  and below, there is a block, that block is a non-database block in which I should get part numbers in the first text element that is 'possible' for example,

  and a "31" for the days box, these boxes are not two database items, they are in the same block.

  the task said that I have to recover the rooms reserved in the first text item and check the boxes for the days that the room is reserved.

  for example,.

  Number 1 in the table in the room is reserved in days 20 and 21

  Number 2-the room is reserved in the days 15 and 7

  so I could retrieve the numbers of rooms and check the check-box (20) and (21) number 1, the room

  and check the box (15) and (7) room number 2.

  How to do?

  first problem, I can't name the squares with numbers, so I their alphanumeric name, like dy01, dy02 and so on.

  If you can support me with a solution, please?

  Thanks in advance

  There are several solutions, others using a DB block and something like STRAGG or LISTAGG (which I prefer) and some with a non-db block. As you asked non-db-block, here is an example of code (not tested)

  DECLARE
    CURSOR crReservations IS
      SELECT ROOM_NO,
             TO_CHAR(RESERVATION_DATE, 'DD') DAY_OF_DATE
        FROM RESERVATIONS
       ORDER BY ROOM_NO, RESERVATION_DATE;
    nLastRoom NUMBER;
  BEGIN
    GO_BLOCK('RESERVATIONS');
    CLEAR_BLOCK(NO_VALIDATE);
    FOR rec IN crReservations LOOP
      IF nLastRoom IS NOT NULL THEN
        IF rec.ROOM_NO!=nLastRoom THEN
          -- new room-> new record
          NEXT_RECORD;
          nLastRoom:=rec.ROOM_NO;
        END IF;
      ELSE
        nLastRoom:=rec.ROOM_NO;
      END IF;
      -- Assume that the value for CHECKED is Y for the checkboxes
      COPY('Y', 'DY' || rec.DAY_OF_DATE);
    END LOOP;
  END;
  

• Cannot install Installer.exe - a program "a newer version already exists"...?

  I try to install Seagate Manager (I have a Seagate external hard drive for years and it worked fine).

  I received an upgrade, and therefore he (Seagate Manager) software has stopped working.

  I spend hours with the friendly support of Seagate to re - install the Manager, including the old version.

  "But every time that the installation stops at halfway and I get a message: cannot install software - a newer version already exists.

  The technician tried everything-no results.

  I was told that it must be a registry error / number of Microsoft of bribery...

  How can I find the problem?

  I searched the registry for leftovers under the name of Seagate Manager: no results

  I use CCleaner, which I trust and have no problem with - no result

  MY machine is up to date, running smoothly, quickly, in good shape all - score 7.4

  I ran all available maintenance tasks, sfc scannow, diskcheck, etc.

  What other options do I ave to eliminate the alleged 'new version' - or what ever it is intended to prevent the re - install?

  Thanks in advance

  I use CCleaner, which I trust.

  -> If you trust in the service of 'cleansing' of any registry cleaner, then you are a member of a small minority.

  The technician tried everything-no results.

  -> The message you see is triggered by Seagate Software. Only Seagate engineers would know these triggers, but it seems that they do not pass them on to their support department. They could consist of a file, an entry in a file or a registry key. Given the very large number of keys from registry and values, it is impossible to find relaxation by trial and error. ("Registry cleaners" facing the same problem: they cannot possibly know the purpose of each key of registry or the value.) They are just guessing.)

  I try to install Seagate Manager (I have a Seagate external hard drive for years and it worked fine).

  I received an upgrade, and therefore he (Seagate Manager) software has stopped working.

  -> I want to use system restore to get us back to a point before you install the upgrade. Otherwise, I lower the rear machine to the last image I have.

• Clock availability Windows 8 Task Manager

  I have some confusion with the uptime counter in Task Manager in Windows 8.

  I noticed this on my laptop and my PC. The meter has been synchronizing hours time since... Well since I started using Windows 8.

  I always close the system and just left on a few times to complete maintenance tasks. No matter if I quit, sleep or restart, this counter will always. Even deleted continues to go the power and always the meter.

  Why is what's happening and it can be fixed? Availability, is not supposed to count the time since the machine has started upward?

  Please could someone explain this to me.

  I have some confusion with the uptime counter in Task Manager in Windows 8.

  I noticed this on my laptop and my PC. The meter has been synchronizing hours time since... Well since I started using Windows 8.

  I always close the system and just left on a few times to complete maintenance tasks. No matter if I quit, sleep or restart, this counter will always. Even deleted continues to go the power and always the meter.

  Why is what's happening and it can be fixed? Availability, is not supposed to count the time since the machine has started upward?

  Please could someone explain this to me.

  Hello

  If you have the Quick start option is enabled, the Uptime Clock in the Task Manager is not initialized if you stop and restart or sleep and restart.

  However, it will be reset if you restart the computer in power options.

  Concerning

• HP deskjet 3050 j610a: hp deskjet 3050 j610a

  I have a hp laptop flow and a hp deskjet 3050 j610 while a printer/scanner/copier. It was working fine, I have it set to work wireless. I can print wireless without problem, but all of a sudden when I scan a document it appears on my laptop as a page with nothing but the black lines. You cannot say that there is a document at all. When you try to make a copy, it does the same thing, it prints nothing else than to the thick black lines.

  I already followed the instructions on the hp Web site. I tried unplugging everything and reconnect it when it is 'static', nothing helps.

  I cleaned the glass and scanner cover that has absolutely nothing.

  I used the printer doctor thing they ask you to download and it conducted tests on everything. It is said there is nothing wrong with it, when I do the scan test it always shows me a document of the black line.

  I tried to uninstall the software and printer and did a fresh install, it still does the same thing. I tried to wipe my laptop to the factory settings and resinstalling a new copy of the software of the printer, nothing happens.

  I entered the function within the software, I downloaded from hp and performed maintenance tasks. clean the cartridges, aligned the cartridges and a printed report but it is written an essay on the glass of the scanner has not been made.

  He told me to put a blank page on the screen and press black copy and it prints the same black lines.

  It was not dropped or damaged. It is in the same place all day, every day. NEVER, it moves its location. I clean the area regularly, so there is rarely any dust or debris on or around him.

  nothing has worked. I tried to look it up if he was still guaranteed, I knew I didn't... but I wanted to see if there is an option if I could send it even if they charged me to fix it, but the only option I found was to come here on this forum.

  someone please tell me that they have had the same problem and they know how to solve this problem, im at the end of the line of patience and I can't move forward more. any help would be greatly appreciated. just don't tell me to go buy a new one, I love it and want to do what I can to address them.

  Please please help? someone... anyone... Thanks in advance.

  Hi there @jessicaortiz39,

  That the Forums are with you!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that you are looking to learn how to get a repair done on your printer. I'm happy to help you with this.

  Please see the following: Printers HP-HP Support Options, which give some details about the support available both in and out of warranty.  You will use the link under technical assistance, contact the helpline, but read the section to the right on "Pay by assistance telephone question" when out of warranty. Of course as indicated that fees are removed once the repair is implemented.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Image of task (0 x 80041321) in the backup settings is corrupted on Windows Vista

  Original title: can not save

  I want to back up my computer, but it won't because there is a picture of task (0 x 80041321) in the settings of backup that is corrupt. What to do now?

  Hi Lizbie,

  (1) if it works well before?

  (2) remember to make changes?

  Method 1: Run the fixit available in the link below and check if it makes a difference.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 2: Re-set up backup - users have solved similar issue by following the steps below:

  (a) go to Task Scheduler (run taskschd.msc from a command prompt OR RUN dialog box)

  folder b) navigate under Task Scheduler Library-> Microsoft-> Windows-> Windows Backup

  (c) delete the automatic backup task

  (d) remove the job from the Windows backup Analyzer

  (e) try to re - set up backup

• Operation failed. Validation of the backup task execution failed error message on startp

  Title: backup original validation task execution failed

  Receive message at next startup:

  Operation failed. Backup validation task execution failed. Description: Description of the scene see log operation for more details.

  I looked at the log of the operation and there were entries for each occurrence. Unable to determine anything else.

  Hi BobBianconi,

  (1) since when are you facing this problem?

  (2) what backup program do you use?

  It seems that you use non-Microsoft backup software. If this is true, you can check with the provider of software for known problems.

  The following steps can worth a try:

  Method 1: Run the fixit available in the link below for common system maintenance tasks.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: activate the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• DeskJet 2540: Problem of cartridge Deskjet 2540

  I bought a carton of color HP301XL real alternative with my new printer a year ago 2540 (John Lewis - & I have every two years warranty with them).  A few months ago, when the ink of the trial missed, (& while the printer was still under warranty HP), I installed the new cartridge and it worked fine for a while.

  A week or two there is the printer will not operate and displays a message indicating that the cartridge is empty and that it replaces. I use the print color VERY sparingly. The ink level display showed a lot of remaining ink and I did not see how the cartridge might have suddenly run out of ink.

  I scoured the suggested remedies: clean contacts cartridge and printer (distilled etc.). After several attempts to clean-up, the printer started working again for a day or two, but then the almost nine (genuine HP) black cartridge empty also showed. More cleaning and the printer worked again for a day or two, showing both nearly full cartridges, ink indicators.

  Since then I could not print and everytime I try, I get a variety of messages telling me the cartridge is empty or not a part of HP, or it is a cartridge 'more' and must be replaced.

  It takes a lot of my time and I have other things to do than mess trying to convince the printer to work.

  Could you help please, before that I resort to contact John Lewis for help and a replacement printer as possible?

  Hi @ILIL,

  Welcome to the HP Support Forums, I understand your frustration and want to help you with the HP Deskjet 2540 and problems with the cartridges that you encounter.

  I'll see you when you started running on the problem, you have repeated the cleaning process several times. When you clean or align the print heads that shoot the ink cartridges for these maintenance tasks, that's why you saw the depletion of ink. To get a better understanding of take a look below:

  Using ink in inkjet printers.

  "I would like you continue to take a look here: a cartridge ' more ' message for HP Multifunction printers and monofunctional

  Please contact our technical support at the 800-474-6836 as it may be hardware printer or cartridge. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you

• DeskJet 970 - no Toolbox HP in Windows 7 driver

  It seems that now I've upgraded to Windows 7, I'm not finding the same level of printer features driver for my old-but-still-working-perfectly Deskjet 970.   For example, where is the utility to display the ink level estimated with each cartridge?   The printer driver "in the OS" seems to be Sub optimized compared to the provided HP driver that I had in the previous operating systems such as Vista.   Is it because HP can not be bothered to provide a suitable driver for this printer on Windows 7?    They are trying to subliminally to force me to buy a new printer?

  Hi splinternet.

  Although your HP product works essentially the same with the driver the operating system (OS), you will notice some differences. One difference is that you will not have access to the same HP Toolbox. However, there is workaround solutions available for tasks that are usually performed with the HP Toolbox.

  Workarounds for HP Toolbox

• Automatic maintenance cannot be stopped on Windows 8-64 bit OS

  Automatic maintenance works for the last two months. When I try to stop the automatic maintenance in the center of the action, he gives no answer.

  Hi Adam,.

  If you are logged in using an administrator account?

  Windows 8 automatically performs a number of maintenance tasks for you, including the diagnoses of the intelligent system, to check if updates are available for your software and perform security scans. Auto maintenance done too many functions, switch it off completely is not advisable.

  Automatic Maintenance runs normally at a time when the computer is idle. When it detects that the computer is used both in the demand for auto maintenance, then it does not start automatically, and instead, he waits for the next time when the computer is idle.

  Apparently, it is not possible to turn it off completely. You could disable at least starting to wake your computer.

  You can view the MSDN blog to change the settings for Maintenance and to get more information about the automatic Maintenance on Windows 8:

  Windows 8: updates and Maintenance

  For more information, see the article:

  Automatic maintenance

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• DeskJet 1280: Deskjet 1280 drivers for Windows 10 x 64

  Hello

  I have a HP Deskjet 1280 printer and recently upgraded my OS from Windows 7 to Windows 10 x 64. The operating system cannot find a compatible driver for the printer and my attempts to find someone online have been unsuccessful.

  Could you please help me and advice if and where I could find the driver I'm looking for?

  Thank you in advance!

  Manolis

  The Deskjet 1220C driver available via Windows Update is a good match for the Deskjet 1280 Windows 10.

  

• HP Deskjet 6980: windows 10 + HP6980 to print YELLOW

  The driver for the HP Deskjet 6980 for Windows 10 mistranslates colors sent to the printer. It's what I use is the only new driver for this printer for Windows 7/64.

  Specifically, the YELLOW does not print at all - anything this spell either green blue. I tested this feature by printing two versions of color bars. Indeed, there is no yellow printing, and all the Greens are printed blue. And, Yes, I use new color and black cartridges, so no need to ask about it.

  I built a computer completely NEW with NEW hard disks and a clean install of Windows 10/64-bit via USB 3.0 drive. The only two things that the surplus of my old Windows XP system are the printer and the scanner (HP Scanjet 4370) which worked perfectly on XP system. The scanner has its own problems with Windows 10 and the HP Photosmart Premier does not work (but it is a different matter). I downloaded the new drivers for both devices.

  Apparently, from what I read on the site of HP, the printer or the scanner are supported any longer. I consider that very rude and unacceptable, especially since no appropriate replacement printer is available new from HP with good quality that I've come to expect from HP.

  All that said, is anyone know how I can get my printer to print YELLOW?

  Proteus

  Hello

  Thank you for using the HP Forums.

  The Deskjet 6980 is available in the IN-OS drivers.

  Drivers to win 10 In-OS

  Follow these steps

  1. click right on the button start (Windows icon) select 'control panel '.

  2. under "Control Panel", select "view devices and printers."

  3. Select "add a printer".

  4. If he finds your printer (you have your printer connect via the USB port on your computer), follow these steps to install the drivers in the OS.  Otherwise, select 'the printer that I want isn't listed' > next

  5. in the next screen, select 'Add a local printer or network printer with manual settings' > next

  6. Select "use an existing port: ' > next»»

  7. Select HP > HP Deskjet 6980 (HP) (we recommend that you click on "Windows Update" which could make the HP Deskjet 6980 printer (HP) option.  Note that the 'Windows Update' can take up to 10 minutes depending on how fast your speed at wide band is"

  

  8. click on 'Next' and follow the remaining steps to install your printer driver.

  Hope that helps for printing.

  About your Scanner, you can try this:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.