HP Deskjet 3055 A, Scan Mac problem

Similar Questions

• scanning Mac problems

  Hello

  I just installed the Hp deskjet F4480 all-in-one printer. It seems to print fine, but when I try to scan it says "unknown error." I use a macbook pro, OS X 10.6.4.

  How can I fix it?

  Where did you get the HP software?  If you have loaded the software from the CD for the printer HP and unless your CD says it supports in particular 10.6 Snow Leopard, you need to uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• HP Deskjet 3055 has all-in-one installation with mac

  just bought the perfect printer for my HP Deskjet 3055 A scanner/printer/photocpier needs and I precisely wanted to that it is wireless. to see that it won't install with MAC OS X 10.7.5... When I insert the instalation disc the message is "operating system is" the installer is not compatible with the version of the operating system on your computer. It is only compatible with 10.6 and below.

  is it possible for me to get this to work without having to plug?

  Hello

  Constitutes plug in the USB cable, it is necessary to configure the wireless connection.

  Then, download and install the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&CC=UK&DLC=en&LC=en&OS=219&product=5224271&sw_lang=

  During the install you will be guided to configure the wireless connection, once the client software installation compelte it will inspire you to unplug the USB cable.

  Kind regards

  Shlomi

• problem with Wi - Fi of the HP Deskjet 3055 A J611-n

  Hello

  I'm a newbie in the forum. I have to solve a problem, I had this morning with my new printer HP Deskjet 3055 A J611-n.

  First of all, I would like to know the reason why I found the 3050 a J611a installation CD in the box, I hope that's not a mistake, and drivers are the same that I have to use to install the machine.

  Then, I have a problem with the wireless connection. When I tried to connect my printer to the router, my printer found the link and all of a sudden he throws on all laptop computers connected to the same network. He brought to the installation to fail, because the printer found the router, but it also could not complete the installation correctly because the cell phone has been disconnected.

  Can someone help me solve the problem, please?

  Thank you in advance.

  I fixed the problem by unplugging all laptops and leaving in line just one where I wanted to install the printer on. It worked fine (I used your suggestions).

  Thank you for helping me.

• OSX Maverics problem configure Deskjet 3055 A

  After performing an installation of os x Mavericks to install the latest version of the printer software HP Deskjet 3055 A (a 3050-Deskjet - J611_v12.23.0) complete the installation process crash.

  The printer is in system preferences and the Apple software update makes same corectly print correctly, the only thing the software does not install everything and I don't have the utility device app and I can't set up the WIFI printer.

  Excuse my bad English. concerning

  Hi manelolesa,

  Here is some information on software for the Mavericks.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should start then flashes, this means that it is now in autowireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup-3050 has and then a part of the MAC address. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. The default IP for autowireless is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup wireless along the left side Assistant to start to set up the printer.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer to the system Prefrences.
  3. Print

  I hope this helps.

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• DeskJet 2540: cannot convert mac wireless usb printer

  Hello

  I'm having a problem setting my printer all-in-one Deskjet 2540 on my macbook (osx El Capitan). After basic implementation through usb connection, I was able to connect my printer to my router, which makes possible wireless printing. I was then able to print wireless from my phone using remote control all-in-one app.

  However, I now want my macbook to establish a wireless connection to the printer instead of the usb connection that is used for configuration. I can't find the option to convert a usb printer to a printer that is connected to the wifi. When disconnecting from usb, laptop computer notes the connection with the printer is lost. To install my printer, I use the HP Utility software, in which I can't find such an option. Also, when passing through Apple-> system-> printers and scanners preferences I can't find an option "convert to wireless. I also read a method via Finder-> applications-> HP and then an icon for installing the software & should be there? In my case, there is only the HP Utility icon which directs me to the same program in which I could not find the option.

  What I was looking for, and where can I find it?

  Might be a little exaggerated description, but I hope that this makes it extremely clear...

  Hi @Jeppie,

  Thank you for joining the HP Forums!

  I read your post about how you try to connect your HP Deskjet 2540 to your Mac using a Wi - Fi. I'm happy to help you!

  Please take a look at this video, install a printer in Mac OS X v10.11 El Capitan HP by using a network connectionand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that solves your problem!

• DeskJet 3050 has with Mac Ibook

  One month there has been no problem with Deskjet 3050 a with Mac Book Pro.  Now cannot print Pages.  Have done all the troubleshooting recommended by HP.  Printer's default; the supplies are good.  The printer is idle.  Have you tried both wireless (that worked before), and now with a usb connection.  Have spent more hours trying to correct.  Problem started with very slow printing - couple of lines, stops and then repeat until the page is done.  Now does not print at all.  Help.

  Hi again!

  I have a few suggestions that will work if everything goes well for the printing problem. Before attempting any software below, please make a copy or two out of the façade of printers to test the equipment. If the copies appear to work correctly, continue with the steps of software!

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the driver full features here: HP Deskjet full feature software and drivers - Mac OS X 10.6, OS X 10.7, OS X 10.8

  Try to print from where ever you and also try printing of text editing. Let me know the results!

  Best wishes to you, I hope this helps

• DeskJet 3050 has: Scan Options window

  Hello

  I have the DeskJet 3050 a printer and when I scan something it automatically scans in JPEG format. As I want to change my scans, I downloaded and installed the OCR software (I followed the instructions posted on the support forum HP, installation of the software for the HP Pro 8500 printer A910n JO). After you install this software, however, I can't find a scan window that allows me to choose the format for the scan options I'm about to do -: in other words, I don't have a window which now allows me to choose the RTF rather than JPEG. Do you know where I can find it?

  (the instructions given on the Support forum for this step are: 4) now open the HP Deskjet 3050 scan window. Select "Scan" everyday and in the dropdown for "Type", select "Rich TEXT" or «indexable PDF»

  (My problem is that I can't find the window of scanning HP DeskJet 3050 - and constantly scans automatically to JPEG format)

  Thank you

  First of all, you must have the drivers and software HP Deskjet full functionality installed.  The scanning software provided with the HP Deskjet 3050 does NOT include OCR capabilities.  However, the HP OfficeJet Pro 8500 a A910n printer come with OCR capabilities.  Thus, the installation of the software and driver for the OfficeJet included installing the OCR package that can be used by the HP Deskjet 3050 HP scanning software and the product HP OfficeJet.

  The HP scanning software are accessible in several ways:

  • #1 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Scan
  • #2 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Deskjet 3050...
  • Method #3 - Windws 7 Office: find HP Deskjet 3050 desktop icon; If it is present, run (double-click on).

  Method #2 and #3 will launch the Desktop Client software. Under the analysis section, choose 'Analyze a photo document' to launch the HP scanning software.

  • Method #4: Navigate to C:\Program Files (x 86) \HP\HP Deskjet 3050\bin; Run Scan.exe HP (double click).  (Note: the C: drive is the default installation drive, change accordingly if you have installed the software on a drive by default.)

  In the HP scanning software, you should see a number of shortcuts named Scan on the left panel of the dialog box.  Select the Scan shortcut named 'Scan' every day and change type of file to RTF settings in the right pane of the dialog box.  You can also create your own Scan shortcuts and configure the settings for scanning for this Scan shortcut to your liking, including the file type.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  Although I am an employee of HP, I speak for myself and not for HP

  Give Kudos to say 'Thank you' by clicking the 'PLoP icon '.

• HP Deskjet 3055 has. Unable to see the balance of the ink in the cartridges

  I have HP Deskjet 3055 has (3050 all-in-One series of J611). So far, when I clicked on the HP icon on my desktop I have learned how much ink is left in my cartridges. Now I can't learn this - all I can learn from the icon is the current position of any current print job. Also, I used to be able to order the new printing caridges via my HP icon - I think that it is now not possible. What is the answer. I had thought to unplug the printer and then reinsert new with the original CD. This seems a radical step but is it the solution?

  Hello pm1810,

  Welcome to the HP Forums!

  I understand that you are unable to see the ink levels using the HP icon on your desktop. I will do my best to help you! What is your operating system on your computer? Click here to read: Windows.

  When you click on the HP icon on your desktop, is it called the wizard of the printer? How is the printer connected? USB or wireless?

  If you are referring to the Printer Wizard and you are unable to access to the 'estimated ink levels' and a 'supplies shop online', then I recommend you to uninstall the software:

  Please follow this HP document uninstalling the software of the printer. (If this printer is connected by a USB cable, then disconnect the power cord from your computer.) Be sure to choose your appropriate operating system. Then, please clean the Temp folder on your computer. I'll give you a document here to help you.

  Now, install the full features on the site of HP software here. Choose your appropriate operating system. If you are still having the same problem, could you please send a page on this post.

  Impatience on your part have a beautiful day!

• DeskJet 3055 loses the WiFi connection

  My deskjet 3055 A put in place perfectly, and I was able to print via the [zv6252EA Pavillion] laptop using windows XPvia my iPad 4 and on my phone using the HP application.  However, by turning off and return the next day it would not connect.

  I Redid the installation process and yet once again, it worked perfectly, but today, after the back passage, it fails to connect to the internet.

  Say wireless network Test results "parameters ~ ~ no filtering ~ ~ FAIL" and the given solution is to "..." Add the MAC address of your printer in the list of devices allowed for your wireless router before continuing.

  My router is a THOMSON ST585v6, but I have absolutely no idea how to add MAC address and do not understand why he connects and works when I go through the procedures but don't reconnect the next day?

  HELP, please!   [But please speak in layman's language, I am a granny 68 years, not one bit of computing!]

  Hi Granny-M.

  I recommend that you uninstall your software, download the full features of hp.com software and reinstall.  I have provided a link which will guide you through the process.

  Click here

  Let me know how it goes.

  Good luck!

• HP Deskjet 3055 has the Macbook Air without wifi connection

  To make the HP Deskjet 3055 has for my son for the University.  They use an Ethernet connection over wifi and so it would probably be to connect your Mac to the printer using the USB cable instead. What sounds right and I have reason to think that cable he would need is included in the box of the printer?

  Hello

  That is right.  The printer does support wireless or USB and not wired Ethernet.  The cable comes in the box.

• I lost the cd for my printer HP Deskjet 3055 A wireless, how do I use / install on my laptop?

  The cd of my printer HP Deskjet 3055 disappeared, and I don't know what to do because I am desperate to use my printer right now and I don't know if there is a way in line or help to operate my camera without the cd. This printer does not have a USB option.

  The first computer on which is installed the printer no longer works, and no one can install the printer on another computer, such as the cd is lost. What do I do? Help!

  You can download the content/software CD of her:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & LC = in & Product = 5224271

• Deskjet3055A HP: Deskjet 3055 has windows 10

  I think of the 8 to 10 Windows windows upgrade.

  There is no driver Win 10 for my Deskjet 3055 on the HP site. My driver Windows 8 will work OK if I update?

  Thanks for any help.

  Thank you very much Sunshyn, you put my mind at rest. I am grateful.

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.