DeskJet 2540: cannot convert mac wireless usb printer

Similar Questions

• HP Deskjet 2540 cannot delete a print job

  I have a Hp Deskjet 2540 I want to cancel a print job to page 8, and I can't remove it outside of Quebec, repeat me the removal

  but he won't, I use a wireless connection. I tried to use the cable connection, but it is not yet clear.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• All-in-one HP Deskjet 2540: delete at the request of print job on a deskjet printer MAC OS 2540 x 10.9

  How can I delete a regular print job to a 2540 MAC OSX 10.9 deskjet printer.  I can pause, but may not know how to remove it completely.

  Hello @annetrumbo,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with removal of a print job in the print queue for your all-in-one printer of HP Deskjet 2540 on your computer Mac OS X 10.9. Can I please you follow the steps below.

  1. click on the Apple icon in the upper left corner of your computer screen

  2. click on System Preferences

  3. click on Print & Scan

  4. click on printer Deskjet on the left to highlight

  5. click on Open Print Queue on the right side

  

  6. in the print queue window, click the print job you want to delete. Then click on Remove in the top left corner. Once the print queue window is clear, you will have a nice clean slate for your printer.

  Please let me know if this procedure works for you. Good luck!

• DeskJet 2540: Cannot print from my devices mobile apple

  You just bought a deskjet 2540 yesterday to print wireless from my laptop and apple iphone 6 + and an air of ipad.  Setting up went well and I can print wireless from laptop but when I search for the printer on my apple devices, it happens with the message 'no airprint printer available. I followed the advice on the site of HP for this problem but firmware download I need only download - research computer printer, my printer comes back but is grayed out so I can't select it to download the update of the firmware.  All devices are connected to the same network.   Spent all day yesterday trying to sort out but it just will not work.  Help, please!

  All you have to do is button below the button on top of your printer selected so that the fire is wireless.

• DeskJet 2540 - letter size copies do not print low half inch

  Setup: Deskjet 2540, Windows 7 Home Premium (64-bit), wireless connection

  Problem: with a letter size (8 1/2 x 11) original, pressing a button on the copy translates copies that Miss the bottom 1/2 inch of the original.

  If I scan the original even, save as a PDF file, then open it in Adobe Reader, then file/print prints the whole page only if I select 'Fit' or "Shrink oversized pages" (resulting in a reduced size copy) - otherwise the printed page will be still absent of the bottom 1/2 inch of the original.  Is not an acceptable workaround, because I need format copies of the original set of format letter with all the content of its original size. Isn't this possible?

  The specification for the Deskjet 2540 margins are 0.57 "for Windows systems and 0.47" for Mac or Linux, see here for more information.

  Figure : margins in portrait orientation

• HP Deskjet 2540 All In One: Unable to print color?

  I have a Deskjet 2540 brand new all-in-One. Printer is delivered without any instruction manual. How to print color? I hit 'print' of my document and it comes out in black and white. When I type on the printer, the 'color' button, it draws just a piece of paper through the unit and nothing is displayed at all. I do not understand this crazy thing. My old printer didn't need me to tell it to print color or black and white, that he knew what was coming through the system. I'm about to make this thing.

  Thanks, actually it would print test print color, just not when I tried to get a print document in color. new printer, new cartridges. Change my selection of the printer of HP Deskjet 2540 2540 Deskjet series just seemed to settle, I don't know why. I just mention it here in case other Mac users have the same problem.

• DeskJet 2540: Change cartridge then won't print

  Print and photocopy OK. Lights began to blink. Ink ran out. Change cartridges. 300 HP. Manual says would print a page automatically. Does not have. Lights continue to Flash. Not photocopy - press the button, lights flash, nothing else. (Off several times). Try to print via WiFi, says printer problem.

  What should do?

  Hi @evennewerbie,

  Welcome to the HP Forums!

  I see that you can not print with your HP Deskjet 2540, and the lights are flashing on the printer. I'm happy to help you!

  I recommend you to go through this guide, lights flashing on HP Deskjet 2540 and printers all-in-one Deskjet Ink Advantage 2545and proceed to question that matches best the lights flashing on the printer.

  I hope this guide is useful!

• HP Deskjet 2540 all in a free router printing

  Hello

  I want to print wirelessly but without router with a Mac. I can see the printer with the airport but wonder UN WAP code.

  If anyone has any idea where to find?

  Thanks in advance

  Hello
  I want to print but without router with a Mac. I can see the printer with the airport but the code amazing WAP.
  If anyone has any idea where to find?
  Thanks in advance

  Thank you for that updated information.

  Yes, you can directly use wireless to print from your computer Mac and iPad. I'll give you another HP document on print from an Apple or a Mobile Android with HP Direct wireless device. Now, you can use the AirPrint feature on your iPad using wireless direct: (this information is the document of HP).

  First step: turn on wireless HP direct:

  1. On the control panel of the printer, press and hold the button wireless live ( ) for 3 seconds. The wireless installation instructions Direct print.
  2. Follow the instructions to connect your mobile device or computer to the printer without router.

• HP Deskjet 2540: Cannot scan multiple pages into a single PDF for printer Deskjet 2540 Windows 10

  I'm scanning several pages (5) in a single document.  I followed the instructions in the other answers to the questions - I chose the type of pdf file, I chose a less than 300 DPI resolution (I use the default value of 200 dpi), and I clicked on Preview (and not scan).  However, there was no option 'Add' page when you preview is posted.

  

  I don't know that I've scanned multiple pages in a single document, following the intructions of same, before moving on to Windows 10.  It is no longer possible with Windows 10?

  Thank you.

  Is this program, the program of HP that was loaded with the drivers and full software?

  You should have something like this with a sign at the 07:00 position.

  

• All-in-one Deskjet 2540 fails to connect wireless

  This printer worked fine without thread until I installed a new (AT & T U-Verse) Internet connection.  Previously, I had a combination router/DSL that had wireless 2 sources (hi and lo Band).  The printer connected to a wireless network with the SSID of "Rooter" (stupid name, but what the heck).

  When the modem/router has been replaced by the unit of AT & T, I lost a wireless sender (Rooter) so I tried to change the printer another point of wireless access on my local network named "FBI_Van" (another stupid name).  To do this, I used my cell phone which, at the time, was very well connected to FBI_Van.  I loaded the drivers from the printer to the laptop, connected the USB cable and began to install the printer for the new wireless connection.

  Efforts to do this have failed.  In the window "Select one of the available wireless networks" (after using the link "Convert a USB port connected wireless"), I could see my access point 'FBI_Van' very well.  By clicking on the button "use this connection", asked me to enter password WPA_PSK expression, I did.  It's the same EXACT sentence I used to connect wireless laptop.  The green progress bar went to halfway and then I got the error:

  "Cannot locate the SSID that you entered, try again".  I won't be an SSID, I entered a password that the requested software.

  First of all, I was not one who entered the SSID - this is the software that "judge" and I just clicked it.  Second, the password was perfect without error letter.

  Whne I run the wireless network Test results, using the printer itself (button wireless & B & W Print) he told me that the printer has been tirelessly "Rooter" looking for (and not finding).  The blue wireless LED blinking and the "signal strength" LCD is forced.

  So, after this long explanation of events, what can I do to make this printer to accept a new SSID access?

  Is there a way to reset the printer to "factory delivered" settings so I can start over?

  Bill

  To answer my own question.  Is there a way to reset the part of the printer wireless.  It is NOT mentioned in the manual, but here's how do:

  When the printer is on, stop the LED flashing wireless by turning off the wireless.

  Hold the button cancel (the big red 'X') and the wireless button at the same time.

  Wait about 10 seconds until the power light flashes once.

  Go to the computer that you have installed the printer software on and go down the menu to "Printer Setup and software" and click on that

  Press the radio for wireless configuration MANUAL (do not push the button 'connect to the router')

  Follow the screens to select the wireless network you want, click Next

  The password for the connection of input and let the software connect the printer to the network.

  It MUST work, if not, repeat the operation (I got two times)

  Bill

• DeskJet 2540: Cannot download the driver file

  I need to reinstall my printer I changed the settings on my router and WiFi.  I tried three times to download the driver file - 2540_188.exe.   It seems to take some time every time that I tried and when I try to open it I first get a wanring of security of Windows 10 and if I by that and try to open the file I get a message "file corrupted".

  Please can someone help?

  Brian

  Welcome to the community @brianardmore HP

  I came across your post about problems you encounter when you install the printer on your system Windows 10 and wanted to respond to my suggestions.

  I recommend power cycling network devices and a clean boot on your computer and then try to install again.

  1. turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).

  2. plug the router back in and wait another minute, turn on the printer and the computer.

  3. from the computer, start clean: clean boot instructions

  4. download and install the printer here: printer install file

  5 return to clean boot instructions and allow the start of programs.

  Note: the security program you have on your computer may be detecting the printer as a threat. Try looking through the settings in this program to add the printer to the list 'allow' so that he knows that it is safe.

  You can also try installing the printer using a different method, such as if you are installing wireless, try USB and then convert the USB wireless when you have completed the installation.

  If you have any questions let me know the details. Good luck!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• DeskJet 2540: Cannot SAVE document after scanning it (SAVE grey button)

  I recently bought a new Macbook Pro and migrated all data, software, etc. during my old MacBook Air. Everything went successfully.

  A problem, I just noticed that I have, however, is with saving a document scanned to a file. The "SAVE" button is grayed out.

  So, wireless, I can scan the document (s) - no problem. Only, I can't save it. This applies to all formats - pdf, tiff, jpeg, etc.

  This was never a problem on my MacBook Air.

  Please let me know if you have encountered a similar problem and how I could go about solving.

  Thank you very much.

  Had the same issue, in anticipation of a software update for OS Sierra HP, you can press on print and then save them in PDF format. It worked for me until HP updates its software I guess.

• DeskJet 2540: Deskjet 2540 stops in the middle of print job

  The printer is new. Its wireless printing, but to halfway through the work, it stops and an error message is displayed on the laptop.

  I ran the printer diagnosys and happened. I can't download the print doctor he asks me for a program to open with him.

  Help!

  Once, select a target folder and click Unzip (unpack), go to the unzipped folder and run the EXE file in this folder, you will see an update of current Windows.

  Don't forget to restart the PC once quick to do.

  Shlomi

• DeskJet 2540 is ready, but don't print a Web page

  I got my printer about a week and have used it for all necessary items with no problem until today.

  I try to print from a Web site that I had NO problem for many years but today, nothing happens.

  Also, note that anything on the web comes as a PDF file when I print, is this normal?

  Hi Avengefulangel,

  Here is a video/document way to print Web Pages in Google Chrome for Windows. I suggest also you update all your Products Adobe on your computer as most of the software of the printer and web pages to communicate.

  I hope this helps, please hold me.

  Thank you

• HP Deskjet 2540: Scanner Communication cannot be established.

  My scanner does not work. I am connected by USB. I've tried everything suggested by HP print and Scan doctor. I tried to uninstall and reinstall the software for the device, but it still does not work. I'm very angry because it worked fine for 3 months. I went out of town for the winter holidays and took my computer with me. I left my HP Deskjet 2540 to my apartment. Now that I'm back it no longer works.

  Here are the mistakes doctor analysis gives me:

  Driver error:

  The scanning driver is unable to communicate with the product.

  HP Scanner Twain error:

  I followed the steps, he told me but even after restarting the computer of the Scan Doctor is unable to solve the problem and he just told me to come here and ask online. I really need this scanner set as soon as possible for my work in the classroom. It is very frustrating that my HP Deskjet 2540 broke shortly after buying it.

  Too bad. Solved the problem by changing a connection of 3 USB-a USB 2 connection. For some reason any Scanner HP Deskjet 2540 cannot use via a USB 3.0 connection.

  I don't know why it is exactly, but that's what I did and now it works.