HP Deskjet 3510: Cannot connect wireless with new router

Similar Questions

• SONY VAIO VGN-SZ28 cannot connect wireless with WPA encryption

  Hi guys

  I have a sony VAIO PC is unable to connect wireless if I have WPA and WPA2 encryption. When I decrease the security WEP device connects well. the laptop never asks the user name and password of the ad

  The type of security, I use WPA2 802. 1 x with PEAP-EAP-MSCHAPv2

  Please note the following:

  1. Wireless driver is updated to the latest version. I see EAP and WPA Press Cordless screwdriver
  2. Windows XP service pack 3 operating system

  no idea why I am facing this problem?

  Thank you very much

  Elijah

  Hi Elijah

  You can deal with a number of certificate on the laptop.

  If the wireless client is configured to use PEAP Protocol as you suggested the default setting is usually to check the certificate of the server. This would mean that you need to install a certificate on the laptop. However, there should be a setting on the client to disable the server certificate 'validate' If you do not want to (or cannot) to install a certificate on the laptop.

  See attached some screenshots.

  Concerning

  Roger

• CANNOT CONNECT WIRELESSLY WITH THE PRINTER!

  I need assistance to find, how to connect wireless my Windows RT (8.1) and my HP Deskjet 2541.

  Hello

  Gow do you connect your printer now? Are BOTH on the same network? Please try to use Wndows store to install HP AiO Printer Remote.

  I hope this helps.

• HP 6500 E309n cannot connect wireless with 10.7 (Lion)

  I have a printer wireless HP 6500 E309n which worked fine in Snow Leopard, but not after the update to Lion.

  In system preferences, I can query power and using the printer utility levels, I CAN print a test page, but I can't print a configuration page.  Print a page configuration results in the message "could not print the configuration page.

  When I try to print from an application program I get the message "the printer is unresponsive.

  However, when I access the printer directly from Safari, I can print a page of "status of printer report."

  Yes, I have "reset" my printers (delete all printers) and reinstalled the 6500.  Yes, I went through a software update.  Yes, the printer works fine with other computers on the network.

  Help...

  It's weird.

  I unplugged and physically moved the printer next to the router to test a connection via a ethernet cable (worked fine) then he moved the machine to Lion to connect via USB (worked fine).  When I then connected wireless, it also worked fine.

  Apparently simply cut the power and reboot did the trick.

• HP Officejet Pro 8100: unable to operate a printer wireless with new router

  The HP Officejet Pro 8000 has worked successfully for a year on a home network with 3 computers wireless using an internet ATT Uverse router.  The router was changed to another new router with a different network name and the WiFi password ATT Wireless and the printer does not work wireless. The printer does not work dedicated to a single computer with a USB cable.

  Should I download and reinstall a new driver?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP 6980 printer - cannot connect wireless with the new modem/router

  
  

  You're right, that it was not easy... 4 first steps worked well and then fell on a problem with the hpsetup, because it was not on my computer.   Download drivers and software Web site, such as the drive no longer works (I have Vista Home Premium 64-bit).  Doctor of the printer does not work either... in any case it is configured now, but it took about 30 minutes to complete the configuration of the printer.

   

• Turn on the WiFi problem - Atheros AR5007EG Wireless feature will be not - light Windows 7 RC 6.1 - found problem: wireless capability is turned off. Cannot connect wireless with

  I'm not much on COMPUTER stuff so please help - that is the problem...

  Turned on my computer today and cound not connect to internet. The card WiFi AR5007EG says this isn't tour.
  Toshiba L335D - 7820 labtop does not have a switch to turn it ON or OFF, the laptop using fn + F8, but won't do anything.
  Driver details: 8.0.0.225 Windows Device Manager says: this device does not work correctly. I uninstalled the driver,
  Downloaded the newest and re-installed and restarted the computer 5 times.  It is a: Microsoft Virtual WiFi Miniport Adapter #3 that shows that I don't remember being there.  I disabled it and retarted the computer, but no luck.  Finally, when I look at the network connection, the wireless card is showing all the bars in green, but with a big red X.  And Yes, I made sure the network is working correctly.

  Hello

  Atheros AR5007EG wireless card is not on the compatibility list.

  Check with the manufacturer if it is compatible with Windows7.

  You can also check here

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  And you better get to Windows7 RC version.

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• Tecra M1 cannot connect wireless

  Hello

  This new but I hope someone can help me.

  I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

  I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
  I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

  Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
  No problem connecting via a direct cable.

  Thank you

  Hello

  have you tried to connect with another machine to check if it works?
  Otherwise, I suggest the following things:

  -Disable all security features
  -update the firmware on your router
  -dhcp instead of IP´s sets the value
  -read the manual of the router, sometimes they have weird parameters

  and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

  Welcome them

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• Cannot print wireless with Canon Pixma MG3120 but can print via USB

  Original title:

  thing.i same cannot connect wireless on mypixma mg3120 printer.did reinstall and shows ok to print, but will not go wireless when I disconnect usb setup cord.tryed everything to fix.

  Hello
   
  Method 1:
   
  Check out the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
  Method 2:
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  Step 2: Install the drivers from the disc and check.

• My computer cannot connect wirelessly.

  I accidentally downloaded a windows vista edition family basic model of office on my laptop

  Now my computer cannot connect wirelessly. Now when I tried to download the cd I wanted to down load which has windows xp, it has not work it says something about the material or the floppy disk. My model laptop is a Hp Compaq 6910p. Please help me

  Dear, Mizzy2Fy4U

  Hello

   
  1. from which site you downloaded Windows vista home edition?
  2. what operating system is already installed on the computer?
  3. What is the exact error message about hardware and the floppy?
   
  You can also perform the resolution of the problems of Internet connection and check:
  See the link provided:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Unable to connect to my new router cable, my XP and Windows 7 machines

  Vista, wireless router Netgear, no link, please help

  No matter what I try, I can't connect to my new router cable, my XP and Windows 7 machines work fine but the Vista laptop are it. Have searched the web, looked at this site and the forums, but nothing does not jump and helps me solve the problem. I use a HP Pavilion DV9000 laptop, all service packs updates and so forth... any ideas?

  I suggest that you contact your ISP and get their help in setting up the Vista machine so it connects properly.  They know the right settings for the access provider, while we do not have and that there may be something else you need to do with Vista which is different of the other two systems (and hopefullly the ISP will also know and be able to talk you through the process).  I call my ISP all the time and they are VERY useful and have ALWAYS resolved any problems, I called (even if sometimes he had a visit from a technician).

  If the ISP Can ' t/don't/can't help you, then after coming back here and we'll try to go through it step by step, even if we cannot have all the information we need.  But I am sure that they will be able to help you more quickly and more effectively and with greater chances of success.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to get online with new router-"Local access".

  Original title: can't get online with new router.

  I'm having a lot of trouble to get online with my laptop.

  My roommate has recently got a new EE Brightbox. It works perfectly well with his laptop and mobile phone. Also works with my mobile phone. However, when I try to use my laptop it only gives me "Local access". I have no problem connecting to the router, but it just won't let me go online.

  Tried to disconnect/reconnect the connection Wireless on laptop from scratch with wired connection to router, router and router reset re-booting. None of them have worked.

  Any help would be great?

  Laptop works on Vista.

  Hi Rob,

  Thanks for the reply.

  Have you tried methods of resolution of the problems mentioned in the previous answer?

  Please update the State of the question, we are here for you help!

• New routers cannot connect wireless for HP 3510

  I have a new router and you have to reconfigure the connection Wireless for my HP 3510.  I go to the printer and the installation program and to reconfiqure and it States to connect to a USB cable which I am there my new SSID and password on my PC which is correct, and then when I go to then it fails to connect.  What should I do?

  Called Technology Services, it took 2.5 hours to solve the problem.  It seems as the Deskjet 3510 series (mine is actually and 3512) has a big problem with the connection to suppliers IP router which I just got.  They did fix after taking possession of my PC, the software, re - install the software and then spending a lot of time to get an IP address for the router of unistalling.