HP DeskJet 3511: The printer memory

Similar Questions

• Helps to remove a stuck in the printer memory card

  Original title: stuck in the printer memory card
  How can I recover a photo memory card that is stuck in the printer HP PHOTOSMART7600. I have several slots and when I tried one that looked like it would fit, it passed through and then as I tried to solve this problem, it just went over and I can't get out.  I did worse.  Any help would be appreciated.

  Hello allyson nola.

  You may be able to contact a repair provider or HP:

  http://WWW8.HP.com/us/en/support-drivers.html

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• HP 2640 series Deskjet printers: the printer does not

  Dear Sir.

  I have printer HP Deskjet 2640 series, n ° S.

  CN3AH2GHGV0601. My printer is not working as it is reported as

  Brother DCP-116C. How to connect the printer to the right? How

  reset the settings as well from fax in order to make the printer & send fax functional?

  Kind regards

  Devinder Kumar.

  Hello

  Download and run the utility HP Print and Scan Dr. link below to solve the problem.

  www.HP.com/go/Tools

• HP Deskjet 2540: The printer does not work.

  My printer does not print the page, I am sinking.  Instead it tries to download a page that I tried to download a few days ago and he has yet to recognize the page.  It was an image of the Liberty Bell, so I assumed it was copyrighted and would allow me to print and I rejected the page.  Apparently he is stuck somewhere in the printer and it does not load and therefore does not allow me to print the page that I need now.  How can I get this thing off my storage or my printer?  I watched everything I know to review and check in the printer itself.  I do not know how to remove the application printing the page because I can't find in the computer anywhere.

  If you can help me, I would be very grateful

  Thank you

  Linda Schwartz

  Hi @lindaschwartz,

  Thank you for joining the HP Forums!

  I noticed your post on how you can not print with your printer HP Deskjet 2540. I'm happy to help you!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will solve your problem!

• HP Deskjet 2540: The printer is offline

  Hello world!

  I have a printer HP Deskjet 2540, which works fine until I bought a new modem WLAN. The old modem Netgear 4 G LTE WLAN S and a new Huawei 4 G WLAN E5377. My computer and tablet work well with this new device, but the printer is not. I tried to put the modem, printer and computer off and restart them, but it did not help me. I removed the Windows Firewall, it did not help. I tried all sorts of troubleshooting and to take off a printer from the list of printers and install it again. I downloaded HP scan and print doctor without any help. I printed the list of WLANs testresults. He told me that the SSID is always the old name of modem. What I need to change this name to be again? How to do?

  Please, help me to solve this problem.

  Thanks for your help.

  Kind regards

  Anja

  Hello fellifel,

  You will need the new modems to the printer, such as the SSID and the new password information. You can either follow the procedure described in this document, to:

  http://support.HP.com/us-en/document/c03820126

  Or you can also change your SSID and password to what it was with the old modem, and printer should just reconnect. If you do it this way, you will need to change your computer and the Tablet back as well.

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us

• HP Deskjet 2541: The printer cable

  Hi, I need a longer cord (the one that connects from the printer to the computer). The one supplied with the printer is only about 18 ". I need at least 3 feet long cord. (USB)

  The cord is a standard A / B USB 2.0 cable.  You should be able to find this in a computer store or any where that sells printers.  I pick up these to the Dollar for $1 store, nothing fancy is required.  I personally would pay not $30 for the gold-plated version.

  Cables are available in various lengths, I would say not to get a cable more than 10', as they may have problems.

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• The printer memory

  I have a HP Officejet 4500 wireless printer.  Is there a volatile memory volatile or not?

  As soon as it is printed.

• Calibrate the printer

  I had to install a new printhead on my kodak printer, every time I want to use it it tells me new printhead detected, required calibration, how to do the calibration to go into memory so that I don't have to calibrate every time.

  After having installed the printer software & open even & advanced TAB option will be there to calibrate the printhead and the printer memory option to calibrate.

  Hope this will help you.
  Chebli.

• new printer deskjet 3511 will not install the full version

  I just bought a new printer a deskjet 3511. I tried for 2 days to get a full installation. I had hp technology works with me all night. I did a full restore. It will not install stll. It downloads that fundamental. I checked my control panel and it does not show a printer is installed at all. Any help would be appreciated. Thank you

  The extracted program him disappears from the screen, is that correct?

  You never see the HP program - DQEX5.exe install screen.

• DeskJet 3511: HP Deskjet 3511 does not print images

  My printer has stopped printing images. I can print text documents, but with images (I tried jpgs and pngs) it starts work, print the first few lines, then freezes. Print Manager continues to show "print page 1, 49% complete... "Finally, printer spits out paper with the incomplete picture. Then State happening to 'Idle' and nothing will be printed. I tried printing suspension/resumption, restart the printer, printer removal/re-adding (same uninstall/reinstall) nothing works. I'm on Mac OS 10.7.

  Hey @jessicajones6,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the printing problem you encounter when you try to print images of your HP Deskjet 3511 e-all-in-one printer to your Mac OS X 10.7. Because the printing process seems to be 'frozen' and you cannot print anything after that this problem occurs that I think that this issue can be linked on the Mac driver. To solve any driver or software can I please have you follow the steps below.

  Step 1: Resetting the printing system:

  I'll have to start resetting the printing system on your Mac, as it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Deskjet back in right now.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the device:

  1. Please click here to download the drivers for your device
  2. Once the site opens click on the download button in the upper left corner
  3. Once the download is complete, follow the instructions on the screen to install your printer

  Once the installation is complete please try printing an image to check if the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• DeskJet 3511: Samsung Note Pro is no longer print to Deskjet 3511

  I have a Samsung Galaxy Note Pro 12.2 which usually printed using my Deskjet 3511 without problem when I put in place through my computer when I got it. Well my office no longer works, and for six months thereafter, I was still able to print directly from my tablet to the printer directly with printing applications or using direct wifi. However, a couple of weeks, Time Warner had an internet outage in my area who, for some reason, reset the name I had on my wifi access. Suffice it to say since I was not able to print either, I tried with the cloud of samsung impression and the HP ePrint apps but nothing helped. I was hoping that someone else would be able to give me an idea or suggestion as to what I could do to continue to print before buying a new desktop computer... Thanks for all the ideas!

  Well, the following can be done:

  1. On the printer, click the wireless bottom right of the screen.
  2. Scroll to Direct wireless and press OK.
  3. Select (No Security) and press OK.
  4. Make sure that your Android is not set automatically connect to other networks or your data plan if it detects an internet connection.
  5. In your Android settings, you should see a network with a name similar to the HP Print XX Deskjet 3510 series. To connect to this network.
  6. In your browser bar type in 192.168.223.1 address and click OK.
  7. Click the network tab.
  8. Click Network on the left.
  9. On the left you should see an option with a name similar to the wireless configuration wizard. A click on it and follow the prompts to add your printer to your wireless network.

  Please let me know if this allows you to connect to your network. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DesignJet T2530: How to save the file to the memory of the printer to the flash player?

  We had printed a 19 page file with our DesignJet printer and then deleted the file from our desktop. Customer had need another copy so we printed from the file saved in the memory of the DesignJet. Question: How can I put that it was saved on a USB? Thank you very much!

  Hello

  But remember this file is a temporary file until that backup file more, all are County for sequential printing job. It is not possible to copy for the thumb of the printer.

  Thank you
  Rashed

  I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.

  If your problem is resolved please click the button "accept as a Solution.

  If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.

• HP deskjet 3052 has works on my wifi after I reset the printer / modem/router - but failed later

  I had my HP Deskjet 3052 a work from PC, MAC, iphone / ipad on my Airlink wifi after a reset on the printer - router - modem.

  It fails when I try to use it later in the day - unless I'm resting again.

  Do I have to reset each time I print?

  New modem/router solved my disconnect problem - but I still cannot connect my imac running Mac OS X 10.5.8.

  I am connected to the wireless - i.e. - accesses the internet, I cannot connect deskjet - is told by the way now I hace a 3520e model - instead of the 3052.